Soundcore Glow Mini Bedienungsanleitung

At a Glance

Charging Your Speaker

Powering On / Off

Using Your Speaker

Button Controls

soundcore App

Reset

Specifications

soundcore Glow Mini

User Guide (A3136)

At a Glance

Charging Your Speaker

• Use a certified USB-C cable and charger to prevent any damage.

• Fully charge this speaker before the first use to prolong the lifespan of the

built-in battery.

Bluetooth LED

USB-C Charging Port

Strap

Power Button

Power LED

LED Ring Light Button

Volume Down Button

Volume Up Button

PartyCast Button

Bluetooth Button

Flashing Red Low Battery

Steady Red Being Charged

Steady White Fully Charged

Powering On / Off

Press Power On

Steady White

Press and Hold for 2 Seconds Power Off

Light Off

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode

Press the Bluetooth button to enter Bluetooth pairing mode, then select

"soundcore Glow Mini" from the Bluetooth list to connect.

Glow Mini

Press Enter Bluetooth Pairing Mode

Flashing Blue Bluetooth Pairing

Steady Blue Bluetooth Connected

• To re-enter Bluetooth pairing mode, press the Bluetooth button once.

• This speaker can only play music on one mobile device at a time. To play from

another connected device, pause the device that's currently active first.

• Each time you power on your speaker, it will automatically connect to your

last connected device if available within the Bluetooth range. If not, press the

Bluetooth button to enter Bluetooth pairing mode.

TWS Mode

Two identical Soundcore speakers can pair with each other for stereo sound. Both

speakers can play the same audio (one as the left channel and the other as the

right channel).

With one speaker connected to a smartphone, press and hold the Bluetooth

button for 2 seconds on two speakers to enter TWS pairing mode.

Speaker 1

PAIRING

CONNECTED

Speaker 1Speaker 1/ Speaker 2

CONNECTED

Speaker 2

Speaker 1 Speaker 2

>2s

Press and Hold for 2 Seconds Enter TWS Pairing Mode

Flashing White TWS Pairing

Steady Blue (Speaker 1) TWS Connected

Steady White (Speaker 2)

• To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.

PartyCast Mode

With one speaker connected to a smartphone, press the PartyCast button on up

to 100 Soundcore speakers with PartyCast function to synchronize audio and light.

×1 ×1

21 3

Primary Speaker

PAIRING CONNECTEDPAIRING CONNECTED

Press Enter / Exit PartyCast Pairing Mode

Flashing White PartyCast Pairing

Steady White PartyCast Connected

Soundcore speakers with PartyCast function can also be connected with this speaker.

Light Modes

The body light on the speaker changes with the rhythm of the music. There are

5 preset music-sync light modes: Campfire Vibes / Neon Night / Spring Break /

Euphoric Dance / Romantic Stroll.

You can also check all available body light modes in the soundcore app.

Press Switch Light Modes

Press and Hold for 2 Seconds Turn off

Button Controls

Press and Hold for 2 Seconds Power On

Press and Hold for 2 Seconds Power Off

Press Play / Pause

Press Twice Next Track

Press Three Times Previous Track

Press Answer / End a Call

Press and Hold for 2 Seconds Reject a Call

Press and Hold for 2 Seconds Activate Voice Assistant Software

Press Enter Bluetooth Pairing Mode

Press and Hold for 2 Seconds Enter / Exit TWS Pairing Mode

Press Switch Light Modes

Press and Hold for 2 Seconds Turn off

Press Volume Up / Down

Press Enter / Exit PartyCast Pairing Mode

soundcore App

Download the soundcore app to enhance your experience.

soundcore

Apple and the Apple logo are trademarks of

Apple Inc.

Google Play and the Google Play

logo are

trademarks of Google Inc.

Product information: Check the product name and software version, or read the

user guide.

Firmware update: You will be informed once a new version of firmware is

detected when you connect the speaker with the app.

Battery status: Indicates the remaining battery level of your speaker.

Volume control: Adjust the volume level via the app without pressing the buttons

on the speaker.

EQ settings: There are 4 preset EQ settings you can choose from in the app to

optimize your experience while enjoying different music genres.

• soundcore Signature: Standard EQ mode optimized for well-balanced sound.

• Voice: Voices stand out more clearly from other ambient sounds.

• Balance: No enhancement for high-frequency and low-frequency sounds.

• BassUp: Turn on BassUp to enhance the low-frequency sound.

Set auto-power off time: Set an auto-power off time. The speaker will automatically

turn off when the time is up.

Light effects: Besides the music-sync light effects, you can also choose your favorite

light effects.

Voice prompt: Mute or restore the voice prompt while powering on/off.

Reset

Press and hold the Bluetooth button and volume up button simultaneously for at

least 4 seconds to reset the speaker.

Specifications

DC Power Input 5V 1A

Battery Capacity 1800mAh/3.7V

Audio Output Power 8W

Speaker Driver 1.75" Full Range x1

Charging Time 3 Hours

Play Time (varies by volume level and

music content) Up to 12 Hours

Waterproof Level IP67

Bluetooth Version 5.3

Bluetooth Range 100m / 328ft

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soundcore Sprecher Handbücher

Soundcore

Soundcore Flare 2 Bedienungsanleitung

Soundcore

Soundcore Infini 2 Bedienungsanleitung

Soundcore

Soundcore Flare Mini Bedienungsanleitung

Soundcore

Soundcore Motion+ Bedienungsanleitung

Soundcore

Soundcore Strike 3 Bedienungsanleitung

Soundcore

Soundcore A3391Z12 Bedienungsanleitung

Soundcore

Soundcore Motion X600 Bedienungsanleitung

Soundcore

Soundcore Flare S+ Bedienungsanleitung

Soundcore

Soundcore Wakey Bedienungsanleitung

Soundcore

Soundcore A3107 Bedienungsanleitung

Soundcore

Soundcore Motion + B07X5TD8FN Bedienungsanleitung

Soundcore

Soundcore Mini 3 Pro Bedienungsanleitung

Soundcore

Soundcore Rave Neo Bedienungsanleitung

Soundcore

Soundcore Trance Bedienungsanleitung

Soundcore

Soundcore Zero Bedienungsanleitung

Soundcore

Soundcore A3371 Bedienungsanleitung

Soundcore

Soundcore Flare Mini Bedienungsanleitung

Soundcore

Soundcore Infini Bedienungsanleitung

Soundcore

Soundcore Soundcore Motion Boom Bedienungsanleitung

Soundcore

Soundcore Motion X600 Bedienungsanleitung

Soundcore

Soundcore Wakey Bedienungsanleitung

Soundcore

Soundcore Flare 2 Bedienungsanleitung

Soundcore

Soundcore Motion B Bedienungsanleitung

Soundcore

Soundcore Rave Plus Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung