SoundMax SM-LED22M06 Bedienungsanleitung
LED TV
Телевизор цветного изображения
c жидкокристаллическим экраном
SM-LED22M06
Instruction manual
Руководство по эксплуатации
Table of contents
2
Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation
Base installation
Wall mounting
Connection
Outdoor antenna connection
Other connections
Operation
Control elements
Front panel
Back panel
Remote controller
Changing the battery
General operations
USB operation
Background information
Operations of file playback
General information
Troubleshooting
Causes of interference
Accessories
Specifications
2
3
3
3
4
4
4
5
5
5
6
6
6
6
7
7
8
9
9
10
11
11
11
12
12
12
13
13
13
14
14
14
15
15
12
OSD operation
Picture menu
Sound menu
Channel menu
Time menu
Setup menu
Lock menu
Electronic programme guide
Digital programme recording
TimeShift function
CI information
9
Before you start
3
Before you start
If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.
Utilization of the product
Important safeguards
• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.
• This unit can be connected to a power
supply outlet without the third ground contact
as well as with a ground contact.
• Always disconnect the power cord and
antenna during a storm.
• Do not fix the power cord with a metal nail.
• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.
• When unplugging the plug, always hold the
wide slot, do not touch the metal part, and do
not destroy, twist, pull or roast the power cord.
• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.
• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.
• Never touch the antenna lie or power plug
if it stars to thunder.
• Do not touch the power plug with wet
hands.
• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non-
designated capacity may cause the fire due to
the generation of heat.
• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.
• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.
• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.
• Over-press the panel may destroy the
product.
• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.
• Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.
• Do not place any vase, potted plant, cup,
medicine and any container with water on this
Before you start
4
Before you start
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.
• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.
• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.
• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left, and right of the TV.
• Please place all the signal cords behind of
rear panel.
• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.
• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, damaged power
cord, connection cable or connection terminal
may cause fire, electric shock or breakdown.
• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.
• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat
exchange in normal working mode, thus please
do not let children or anyone who is sensitive
of temperature to touch.
All images provided herein are schematic
drawings and may differ from real objects.
WARNING
In order to avoid damage, make sure
to secure the unit on the wall
according to the wall mounting
instruction.
Installation
Base installation
Cover a flat stable surface with a soft cloth.
Place the TV unit facedown on the cloth.
Insert the two support legs and fix them with
the supplied screws as shown on the picture.
Wall mounting
•For wall mounting the back cabinet of this
unit is equipped with 4 screw holes. Spread
distance between the holes is 100*100 mm.
A VESA wall-mount bracket should be used
for wall mounting (the bracket is not included
and should be acquired separately).
Manufacturer is not responsible for improper
mounting resulting in damage of the unit.
Wall or ceiling mounting implements
must be durable and sufficient enough to
support the weight of the unit.
• Separate the stands from the cabinet
before wall mounting.
Before you start
5
4
Before you start
Connection
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.
Other connections
• Connect the video source to the AV IN
input using an RCA cable.
• Plug the power cable in the electric outlet,
making sure the current voltage is supported.
• If the video source has a HDMI output
jack, you can connect the signal to the monitor
by the HDMI cable (not included).
• SPDIF coaxial output is intended for
transmitting multi-channel sound to an
external decoder (e.g. in 5.1-CH format).
Coaxial audio cable should be used for
connection (not included).
• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.
Operation
6
5
Operation
Front panel
Control elements
Button panel
Button panel
\ buttons
Scan up/down through the channel list. In the menu
system, they act like the up/down direction buttons on
the remote and adjust menu controls.
\ buttons
Decrease/increase the volume. In the menu system,
they act like the right/left direction buttons on the
remote and adjust menu controls.
\ button
Turns the TV on and puts it into standby. While the
TV is on, it is used to open the main menu and to
return to the previous menu. Outside the menu,
press and hold the button for 3 seconds to go to the
list of signal sources. Press and hold it more than 3
seconds to put the TV into standby.
Back panel
The back panel terminals
are (from top to bottom):
USB port
PCMCIA (CI+) slot
Composite AV input
HDMI input
Headphone socket
Coaxial audio output
TVRF antenna input
Operation
7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1. SOURCE button
2. Number buttons
3. TV button
4. MENU button
5. Cursor (UP/DOWN/LEFT/RIGHT)
buttons/OK button/ZOOM-/ZOOM+ buttons
6. LIST button
7. VOL+/VOL- buttons
8. MUTE button
9. TEXT button
10. SUBTITLE button
11. Red button
12. Green button
13. POWER/STANDBY button
14. GUIDE button
15. EXIT button
16. RETURN button
17. INFO button
18. CH+/CH- buttons
19. TIMESHIFT button
20. REC button
21. LANG/Blue button
22. Yellow button
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• Use two AAA batteries for the RC. The RC
should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
CAUTION!
Incorrect installation of the batteries may
lead to an explosion.
Please replace used batteries with the
batteries of the same or comparable type.
1 2 3
List
TV
REC Timeshift
Operation
8
7
Operation
General operations
• Connect the plug of the power cord
to the power supply outlet, the power indicator
will light showing that the unit is in standby
mode. To switch on the unit, press POWER
button on the panel or on the RC; when the TV
is on, the power indicator is off. Press POWER
button again to switch the unit to the standby
mode, the power indicator will light up. To
switch off the unit completely, disconnect the
power cord plug from the power supply outlet.
• Press VOL- button on the unit or on
the RC repeatedly to decrease the volume;
press VOL+ button on the unit or on the RC
repeatedly to increase the volume.
• Press RETURN button on the RC to select
from the present channel and the previously
displayed channel.
• Press MUTE button to mute sound, press
this button again or adjust volume to resume
sound.
• In TV mode press CH+/CH- buttons on the
RC to select previous or next channel; or press
number buttons to enter a channel number
directly.
• Press INFO button to display the preset
TV channel information.
• Press ZOOM+/- buttons repeatedly to
select a screen format. Available aspects may
differ for different signal sources.
• Press SOURCE button, then press cursor
buttons on the RC to select a source from
available source list: DTV => ATV => AV =>
HDMI => USB; You can press TV button to
access TV source mode directly.
• Press GUIDE button to access the
electronic program guide in DTV mode.
• Press LIST button to enter the recorded list.
• Press SUBTITLE button to enter the subtitle
language menu in DTV mode.
• Press LANG button to enter the audio
language menu in DTV mode.
TELETEXT operations (option)
• Select the TV source mode. Then press
CH-/CH+ buttons to select TV channel in order
to pick up the picture signal of Teletext.
• Teletext button functions are as follows:
TEXT: Press this button to enter into Teletext
mode. Follow the guides on screen and use
the color buttons to navigate the Teletext.
Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.
Operation
9
Operation
OSD operation
1. Press MENU button to enter the setting menu
displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the RC
to select setting page.
3. Press OK button on the RC to go to the
parameter list.
4. Press UP/DOWN cursor buttons on the RC to
select a parameter to adjust.
5. Press LEFT/RIGHT cursor buttons on the RC
to adjust the selected parameter.
6. Press MENU button to return to the previous
menu page. Press EXIT button on the RC to
quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures of
OSD menu are for reference only; they may
differ from the actual menu tabs.
Picture menu
•Picture Mode: Dynamic/Standard/Mild/
Personal. When Personal mode is
selected, you can adjust contrast,
brightness, colour, tint (NTSC signal only)
and sharpness of the image.
•Colour Temp: Cold/Normal/
Warm.
•Noise Reduction: Dynamic noise
reduction effect for reducing the video noise
level. Select the Off/Low/Middle/High/Default
mode.
•DCR: when DCR is enabled,
brightness automatically increases in dark
images and decreases in bright ones.
•Enjoy Music: enable this option to
enhance the way music sounds.
•Auto Volume: reduce the
difference between channel and program
volume automatically.
•Sound mode: Standard/Music/Movie/
Sports/Personal. When Personal mode is
selected, you can adjust treble and bass.
Sound menu
•SPDIF Mode: Select the digital audio
output mode: PCM/AUTO/OFF.
•Aspect ratio: select the screen aspect
ratio.
•Surround Sound: enable or disable the
surround sound effect.
•AD Switch (in DTV mode): This is an
auxiliary audio function that provides an
additional audio track for visually challenged
persons. This function handles the Audio
Stream for the AD (Audio Description), when
it is sent along with the Main audio from
the broadcaster. Users can turn the Audio
Description On or Off and control the volume.
•TT Language: select the language of
the Teletext.
•Audio Language: select the language
of audio (available for some DTV channels).
•Subtitle Language: select subtitle language
(available for some DTV channels).
Inhaltsverzeichnis
Sprachen:
Andere SoundMax LED-Fernseher Handbücher
