Soundstream HARMONY Fehlerbehebungshandbuch
1
HARMONY
Installation Guide & Users Manual
HARMONY
2
Index
1. PRODUCT DESCRIPTION & WARNINGS 3
2. CONTENTS 3
3. DIMENSIONS & MOUNTING 4
4. PRIMARY WIRE HARNESS & CONNECTIONS
4.1 Primary Wire Harness 5-6
4.2 Input Gain Control 7
4.3 RCA Auxiliary Input 7
4.4 SPDIF / Optical Input 7
4.5 Remote Control Connecition 7
4.6 USB Connection 7
4.7 RCA Outputs 7
5. SOFTWARE INSTALLATION 8-10
6. HARMONY DSP COMPOSER 11
6.1 Channel Summing & Input Mode 12
6.2 Channel Setting 12
6.3 Crossover Configuration 13
6.4 Crossover Slope Configuration 13
6.5 Independent Channel Gain 13
6.6 Independent Channel Delay 14
6.7 Response Graph 14
6.8 Equalizer Adjustments 14
6.9 Saving, Opening, & Downloading Pre-Sets 15
7. REMOTE CONTROL
7.1 Master Volume Control 16
7.2 Preset Selection 16
7.3 Input Selection 16
8. SPECIFICATIONS 17
HARMONY
3
1. PRODUCT DESCRIPTION & WARNINGS
Harmony is a digital signal processor essential to maximize the acoustic performance of your car audio system. It
consists of a 32-bit DSP processor and 24-bit AD and DA converters. It can connect to any factory system, even in
vehicles featuring an integrated audio processor, since, thanks to the de-equalization function, Harmony will send
back a linear signal.
It features 7 signal inputs: 4 Hi-Level, 1 Aux Stereo, 1 Phone and provides 5 PRE OUT analog outputs. Each output
channel has a 31-band equalizer available. It also features a 66-frequency electronic crossover as well as BUTTER-
WORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line. The user can select adjustments that allow
him or her to interact with Harmony through the remote control device.
WARNING: A PC provided with Windows XP, Windows Vista or Windows 7 operating system, 1.5 GHz minimum pro-
cessor speed, 1 GB RAM minimum memory and a graphics card with a minimum resolution of 1024 x 600 pixels are
required to install the software and setup the.
2- Before connecting Harmony, carefully read this manual. Improper connections may cause damage to the Har-
mony or to the speakers in the car audio system.
2. CONTENTS
Harmony - Digital Signal Processor.......................................................................
Remote Control...............................................................
Power / Signal Wire Harness...................................................................................
USB Interface Cable.........................................................
RemoteControlInterfaceCable.............................................................................
Mounting Hardware.........................................................
Quick Start Guide..................................................................................................
Warranty Registration.......................................................
HARMONY
4
3. DIMENSIONS & MOUNTING
1 3/8”
(36mm)
HARMONY
5
4. PRIMARY WIRE HARNESS & CONNECTIONS
12 3 45
4.1 Primary Wire Harness
HIGH LEVEL / SPEAKER LEVEL INPUTS
The primary wire harness includes appropriately color-coded 4-channel hi-level signal inputs to connect speaker
level signal from the head unit. If the head unit low-level RCA outputs are equal or greater than 2V RMS, you can
connect it to the high-level inputs. Use the input gain control to appropriately match the input sensitivity to the head
unit output level.
POWER SUPPLY CONNECTIONS
Connect constant 12V+ power to the yellow 12V+ wire and ground to the black GND wire. Be sure the polarity is
as indicated on the wire. A misconnection may result in damage to HARMONY. After applying power, wait at least
10 seconds before turning on.
REMOTE IN / OUT CONNECTIONS
Connect the amplifier turn-on of the head unit or switched/ACC 12V power to the red REM IN wires. Connect the
blue REM OUT wire to the remote turn-on terminal of the amplifier and/or other devices in the system. REM OUT fea-
tures a 2 second delay to eliminate noise pops.
HARMONY must be switched on before any amplifiers are turned
on. The head units amplifier turn-on must be connected to REM IN, and REM OUT should be connected to the
remote turn-on terminal of the amplifier(s) or other devices in the system.
HANDS-FREE BLUETOOTH MODULE INPUT
The primary wire harness also features connections for a hands free Bluetooth module. Connect the audio +/- out-
puts of the hands-free Bluetooth module to the pink color PHONE +/- wires of the primary wire harness. Connect
the mute trigger output of the hands-free Bluetooth module to the orange color PHONE MUTE - wire of the primary
harness. The mute control is activated when the mute trigger receives ground. The PHONE MUTE terminal can also
be used to enable the AUX input. In this case, the PHONE +/- inputs are inactive.
MUTE IN
The outputs of HARMONY can be muted when starting the engine by connecting the brown MUTE IN wire to the
ignition starter turn-on. The MUTE IN terminal can be used to enable the AUX IN input. In this case the output mute
function, set by default, will be disabled.
HARMONY
6
4. PRIMARY WIRE HARNESS & CONNECTIONS (cont.)
MUTE TRIGGER (BROWN) 1
REMOTE OUT (BLUE) 2
N/A 3
RREMOTE IN (RED) 4
N/A 5
PHONE - (PINK/BLK) 6
REAR LEFT - (GREEN/BLK) 7
REAR RIGHT - (PURPLE/BLK) 8
FRONT LEFT - WHITE/BLK) 9
FRONT RIGHT - (GREY/BLK) 10
11 GROUND (BLACK)
12 N/A
13 +12V (YELLOW)
14 REMOTE IN (RED)
15 PHONE MUTE (ORANGE)
16 PHONE + (PINK)
17 REAR LEFT + (GREEN)
18 REAR RIGHT + (PURPLE)
19 FRONT LEFT + (WHITE)
20 FRONT RIGHT + (GREY)
1 BROWN MUTE TRIGGER
2 BLUE REMOTE OUT
3 N/A
4 RED REMOTE IN
5 N/A
6 PINK/BLK PHONE -
7 GREEN/BLK REAR LEFT -
8 PURPLE/BLK REAR RIGHT -
9 WHITE/BLK FRONT LEFT -
10 GREY/BLK FRONT RIGHT -
11 BLACK GROUND
12 N/A
13 YELLOW +12V
14 RED REMOTE IN
15 ORANGE PHONE MUTE
16 PINK PHONE +
17 GREEN REAR LEFT +
18 PURPLE REAR RIGHT +
19 WHITE FRONT LEFT +
20 GREY FRONT RIGHT +
HARMONY
7
4.2 Input Gain Control
Use the input gain control to appropriately match the input sensitivity to the head unit output level.
High-level input sensitivity is adjustable from 2v-15V.
AUX/low level input sensitivity is adjustable from 200mV-5V.
4.3 RCA Auxiliary Input
HARMONY features an auxiliary stereo signal input to connect to an external source such as mp3 player or other
audio sources. The AUX input can be selected by the remote control or activating the brown MUTE-IN wire.
4.4 SPDIF / Optical Input
Connect the optical output of the head unit or audio device to the SPDIF/Optical audio input. When the optical
input is used, the high level inputs are bypassed.
4.5 Remote Control Connecition
Connect the remote control module to the remote control input, using the supplied network cable. See section
7 for use of the remote control.
4.6 USB Connection
Connect HARMONY to a PC and manage its functions via the supplied USB cable. The connection standard is
USB 1.1 / 2.0 compatible.
4.7 RCA Outputs
Connect the RCA outputs of HARMONY to the corresponding amplifiers, as determined by the settings of the
DSP software.
67
4. PRIMARY WIRE HARNESS & CONNECTIONS (cont.)
HARMONY
8
5. SOFTWARE INSTALLATION
Visit SOUNDSTREAM.COM/HARMONY to download the latest version of the DSP Composer software and USB drivers
to your PC. Be sure to download USB drivers for your computers operating system, Windows 8 or Windows 7/XP:
After successful installation of the USB drivers, launch
the DSP Composer setup application. Select your pre-
ferred language:
After downloading, first install the USB drivers by launching SETUP.EXE in the USB folder. Click INSTALL to
complete installation of the USB drivers:
HARMONY
9
Review the license agreement & select I
ACCEPT THE AGREEMENT, and click NEXT:
Choose an alternate location to save the
program files, or click NEXT to confirm the
default location:
5. SOFTWARE INSTALLATION (cont.)
Close any open applications and click NEXT:
HARMONY
10
Choose to install a short cut in the start menu or create a desktop and QuickLaunch icons, click NEXT:
Finally, click INSTALL to begin installation of the DSP Composer software. If prompted after installation
completion, restart your computer:
5. SOFTWARE INSTALLATION (cont.)
Inhaltsverzeichnis
Andere Soundstream Signalprozessor Handbücher
