Soundwave 7.1 Bedienungsanleitung

USBSoundWave7.1Digital

Quick Installation Guide

Introducing the USB SoundWave 7.1

The USB SoundWave 7.1 Digital is a portable sound card

that brings a home theater atmosphere to notebook or

desktop computers.

FeaturesandBenefits

• Externalvolumeandmiccontrolswithmutebuttons

• 2 microphone inputs and 1 stereo headphone

output

• Supportsrecording throughS/PDIF-in/Mic/Line-

• S/PDIF out – provides digital surround sound

output

• Provides2.1/5.1/7.1connectionforsurroundsound

speakers

Requirements

• PC computer with an available USB 2.0 port

• Windows®XP (32-/64-bit) / Server 2003 & 2008

(32-/64-bit) / Vista (32-/64-bit)

04-0577A

PackageContents

•USB SoundWave 7.1 Digital

• USB cable

• Software CD

• Quick Installation Guide

Layout

Figure 1. Top view

Power/Activity LED Volume Up

Volume Down

Microphone Mute

Volume Mute

Microphone

Mute LED

•Volume Mute: Press this button to

mute/un-mute audio outputs

•Microphone Mute: Press this button to

mute/un-mute microphone

•Volume (UP, Down): Increases or

decreases audio output volume

•Microphone Mute LED: When the

microphone inputs are muted, the light

will turn on

•Power/Activity LED: The light will be on when the

system is powered up. The light will blink when

activity is detected

Headphone

Line In

Front

Speaker

Surround

Speaker

Center/Bass

Speaker

Back Speaker

Figure 2: Front connector

•Headphone: Connect to headphone.

•Line In: Connect to tape/CD/DVD

Player,or otheraudiosources foroutput

mixing and/or recording

•Front Speaker: Connect to Front

speakers (via external amplifier)

•Surround Speaker: Connect to

Surround speakers while in 4/6/8

channel modes (via external amplifier)

•Center/Bass Speaker: Connect to

Center/Bass speakers while in 6/8

channel modes (via external amplifier)

•Back Speaker: Connect to Back speakers while in 8

channel mode (via external amplifier)

Figure 3: Rear connector

S/PDIF IN

S/PDIF OUT

USB Connector

•S/PDIF IN: Connect to digital output of external

audio device via an optical S/PDIF cable

•S/PDIF OUT: Connect to digital input of external

audio device via an optical S/PDIF cable (cable not

included)

•USB Connector: Plugs into the system’s USB port.

Figure 4: Side connector

•MIC (1) IN: Connect to a microphone (Mono left

channel)

•MIC (2) IN: Connect to a microphone (Mono right

channel)

Software Installation

WindowsXP/Server 2003&Vista willautomaticallyinstall

it's built-in driver for the USB SoundWave 7.1 Digital when

connected. To get USB Multi-Channel Audio Device

Utility, Mixer, Equalizer and simulated 7.1-channel sound

from headphones or stereo speakers, install the USB Multi-

Channel Audio Device software and driver from the CD.

Plug in the USB SoundWave 7.1 Digital and allow the

Windows driver to load before inserting the software CD.

WindowsXP/Server2003

1. Insert the software CD. Autorun should start the

installation. If Autorun doesn't start, click Start,

then Run. Type X:\setup.exe, then click OK.

(Change X: to match your CD-ROM drive letter)

2. Click Next, Next.

3. Select Yes, I want to restart my computer now,then

click Finish.

WindowsVista™

1. Insert the software CD. AutoPlay should start the

installation.

At the AutoPlay box: click Run Setup.exe.

If AutoPlay doesn't start: click Start, in Start Search,

type X:\setup.exe, then press Enter.(Change X: to

match your CD-ROM drive letter)

2. Select Yes, I want to restart my computer now,then

click Finish.

WindowsServer2008

1. Plug in the USBSoundWave 7.1Digital intoa avalible

USB port. The OS does not have a build in driver.

2. Insert the software CD. AutoPlay should start the

installation.

At the AutoPlay box: click Run Setup.exe.

If AutoPlay doesn't start: click Start, in Start Search,

type X:\setup.exe, then press Enter.(Change X: to

match your CD-ROM drive letter)

2. SelectYes, I want to restart my computer now, then

click Finish.

ToVerifyInstallation

1. Check Device Manager for proper installation:

For Windows Server 2008: right click Computer,click

Manage, double click Diagnostics, click Device

Manager.

For Windows Vista: right click Computer, click

Manage, click Continue, click Device Manager.

For Windows XP/2003: right click My Computer,

click Manage, click Device Manager.

2. Double click Sound, video and game controllers:

With USB Multi-Channel Audio Device driver: USB

Multi-Channel Audio Device will be displayed.

With Windows built-in driver: USB Audio Device

will be displayed.

USB Multi-Channel Audio Device Software

Utility

The USB Multi-Channel Audio Device quick start icon,

located in the taskbar by the clock, starts automatically

when Windows boots. Simply click on the quick start icon

to open it.

Enable/DisableOpticalS/PDIFOutput

The Optical S/PDIF out is enabled by default.

1. Click on the USB Multi-Channel Audio Device

quick start icon.

2. From the Main Settings tab, click on the radial

button next to S/PDIF Output.

Speaker Configuration

Windows XP

1. From the main desktop, click Start, Control Panel.

2. Click Sounds and Audio Devices.

3. Select the Audio tab.

4. Click Advanced under Sound Playback, then click

the Speakers tab.

5. Select your speaker type from the drop down list.

6. Click OK to save the settings.

WindowsServer2003

Make sure to log in as Administrator or an account with

administrative privileges.

1. From the main desktop click Start, Control Panel.

2. Click Sounds and Audio Devices.

3. Select the Audio tab.

4. Click Advanced under Sound Playback, then click

the Speakers tab.

5. Select your speaker type from the drop down list.

6. Click OK to save the settings.

WindowsVista/Server2008

Make sure to log in as Administrator or an account with

administrative privileges.

1. Right click the volume control icon located in the

taskbar by the system clock.

2. Click Playback devices, select Speakers USB PnP

Sound Device, click Configure.

3. Follow the on screen instructions to configure your

speakers.

Microphone Configuration

WindowsVista/Server2008

1. Right click the volume control icon located in the

taskbar by the system clock.

2. Click Playback Devices, under the Playback tab,

select Speakers USB PnP Sound Device, click

Properties.

3. Click the Levels tab. Click the speaker icon to either

enable or mute the microphone as indicated by the

red circle (muted) next to the icon.

4. Move the slider to change the volume level.

5. Click OK to save the changes.

6. Click the Recording tab.

7. Select Microphone USB PnP Sound Device, click

Properties.

8. Clickthe Levels tab.

9. Move the slider to the left to increase sensitivity.

10. Click OK to save the changes.

11. Click the Custom tab.

12. Check Microphone Boost, click OK.

Note: Microphone Boost increases sensitivity

by approximately 20dB. This setting is

optional and not be needed in most cases

Uninstalling USB Multi-Channel Audio

Device Software Utility

ForWindows XP/Server2003

1. Click Start.

2. Click Control Panel, double click Add/Remove

Programs.

3. Select USB Multi-Channel Audio Device, then

click either Change/Remove or Add/Remove.

4. Follow the on screen instructions to complete.

ForWindowsVista/Server2008

1. Click Start, Control Panel.

2. Click Classic View, double click Programs and

Features.

3. Select USB Multi-Channel Audio Device, then

click Uninstall/Change.

Windows Vista: click Continue.

Windows Server 2008: continue to step #4

4. Select Yes, I want to restart my computer now and

click Finish.

Inhaltsverzeichnis

Andere Soundwave Soundkarte Handbücher

Soundwave

Soundwave Pro 2000 Bedienungsanleitung

Beliebte Soundkarte Handbücher anderer Marken

PCchips

PCchips CMI8330 Bedienungsanleitung

Creative

Creative Sound BlasterX G5 SB1700 Bedienungsanleitung

IBM

IBM Music Feature Card Bedienungsanleitung

Diamond Multimedia

Diamond Multimedia Xtreme Sound Bedienungsanleitung

Digigram

Digigram VX222v2 Bedienungsanleitung

MARIAN

MARIAN SERAPH M2 Bedienungsanleitung

Pure Speed

Pure Speed DSU6000 Bedienungsanleitung

Philips

Philips Seismic Edge PSC704 Bedienungsanleitung

ADDAC System

ADDAC System ADDAC604 Bedienungsanleitung

Asus

Asus Audio Card Xonar D2 Bedienungsanleitung

Creative

Creative Sound Blaster Pro Bedienungsanleitung

Digigram

Digigram VX222-Mic Bedienungsanleitung

HRT

HRT LineStreamer+ Bedienungsanleitung

ST AEKD-STEREOAVAS Bedienungsanleitung

AuviTran

AuviTran AVY16-ES100 Bedienungsanleitung

Creative

Creative Sound BLASTER Audige Rx SB1550 Bedienungsanleitung

IQaudIO

IQaudIO PI-DAC+ Bedienungsanleitung

VideoLogic

VideoLogic SonicVortex2 Bedienungsanleitung