sourcenext POCKETALK S Plus Bedienungsanleitung
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 1/43
POCKETALK S Plus
VOICE TRANSLATOR
User Manual
Version: 1.0
Date: September 2020
Copyright (C) SOURCENEXT CORPORATION All Rights Reserved.
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 2/43
1
2
3
4
Initial Setup
Initial setup is required when you turn on the unit for the first time.
(The images are from POCKETALK S. Some appearances will vary.)
Turn the Power On
Hold down the power button placed on the right side of the device.
Select display language
Select the language the device settings and explanations will be displayed in. Tap [OK].
NOTE
This is the language your settings and device explanations will be displayed in.
Agree to the EULA
Please read the end-user license agreement (EULA).
To agree, check and tap [Agree].
Verify Your Age
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 3/43
5
6
7
8
It will display an age verification dialog.
Tap [Yes] or [No] based on the message on the screen.
Agree to the Privacy Policy
Please read the Privacy Policy. To agree to the terms, check and tap [Agree].
Connect the unit to the mobile network
This will activate your cellular data plan by connecting it to the mobile network.
Select [Next] when connected.
Set Up the Wi-Fi (Optional)
If you don't want to set it up now
Tap [Skip].
If you want to set it up now
Switch [Wi-Fi] to [ON], tap the network name you want to connect to and enter the password.
And you’re done!
When you are finished with the initial setup, refer to the operating section of this guide and start
translating!
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 4/43
NOTE
To translate, the device must be connected to the internet either through a mobile network or Wi-Fi.
We recommend updating to the latest software when you first set up.
Getting Started
What's included
Unit USB Wall Charger USB charging cable
(Unit connector: USB Type-C
Charger connector: USB Type-A)
Startup Guide
Safety Precautions & FCC Statement
Parts Description
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 5/43
1
2
3
4
5
6
7
8
Speaker
Microphone
SIM card slot
Touch screen display
Talk button
Power button
Volume button
Camera
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 6/43
9
10
11
12
Flash
Strap holder loop
USB charging port
Microphone
Charging
Charge using the included USB wall charger and USB cable.
Turning the unit on or off
If you press and hold the power button on the side of the unit, the unit and display will turn on.
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 7/43
To turn off the unit, press and hold the power button again, and tap [Power off].
To restart the unit, tap [Restart].
Basic Operations
The unit features a touch display. This User Manual uses the following terms to describe operations.
Tap
Touching the screen with your fingertip is called a “tap”, which is a commonly used operation. Touching the
screen and keeping your finger in place is called “tap and hold”.
Scroll
Swiping repeatedly to view other parts in the screen such as lists is called “scroll”.
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 8/43
Swipe
Dragging your fingertip on the screen in one direction is called a “swipe”.
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 9/43
1
2
Using Pocketalk
Translating
You can translate simply by pressing the button and speaking to the unit.
While pressing and holding , speak to the unit when you hear a beep sound
(release your finger from the button when you are finished speaking).
Check the translation result.
Your spoken words and the translation result will be displayed on the screen as text, and the
translation result will be played back as speech.
Some languages are only displayed as text, without speech playback.
Adjust the volume as needed.
Adjusting the volume
Changing the translation direction
The translation languages are displayed as a pair at the top and bottom of the screen.
The language with the blue background is translated to the language with the black background (in the direction
2020/9/18 POCKETALK S Plus User Manual
https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal 10/43
of the arrow).
You can change the direction of translation by tapping .
Changing the translation language
If you tap a language you want to change, a list of languages is displayed.
Inhaltsverzeichnis
Andere sourcenext Elektronisches Wörterbuch Handbücher
