SOYO SY-6BA+ III Gebrauchs- und Pflegehandbuch

SY-6BA+ III

Motherboard

****************************************************

Pentium®

III, Pentium®

II & Celeron

Processor supported

82440 BX AGP/PCI Motherboard

66&100MHz Front Side Bus supported

ATX Form Factor

****************************************************

User's Guide

Technical Reference

SOYO™SY-6BA+ III

About This Guide

This User's Guide is for assisting system manufacturers and end users in setting up

and installing the Motherboard. Information in this guide has been carefully checked

for reliability; however, no guarantee is given as to the correctness of the contents.

The information in this document is subject to change without notice.

by Soyo Computer Inc. You may not reproduce, transmit, transcribe, store in a

retrieval system, or translate into any language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Trademarks

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property

of their owners.

Disclaimer

Soyo Computer Inc. makes no representations or warranties regarding the contents

of this manual. We reserve the right to revise the manual or make changes in the

specifications of the product described within it at any time without notice and without

obligation to notify any person of such revision or change. The information contained

in this manual is provided for general use by our customers. Our customers should be

aware that the personal computer field is the subject of many patents. Our customers

should ensure that their use of our products does not infringe upon any patents. It is

the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and

not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause

at 252.277-7013.

Product Rights

Products mentioned in this manual are mentioned for identification purpose only.

Product names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies.

If you need any further information, please come to our home page on the Internet.

The address is "http://www.soyo.com.tw".

Edition: May 1999

Version 1.1

6BA+ III SERIAL

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER

100%

Table of Contents SY-6BA+ III

iii

Table of Contents

SY-6BA+ III MOTHERBOARD LAYOUT .......................................1

CHAPTER 1 INTRODUCTION .....................................................2

1-1 KEY FEATURES......................................................2

1-2 HANDLING THE MOTHERBOARD..........................5

1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS....5

CHAPTER 2 HARDWARE SETUP...............................................6

2-1 PREPARATIONS .....................................................6

2-2 UNPACKING THE MOTHERBOARD .......................7

2-3 INSTALLATION GUIDE............................................8

CHAPTER 3 BIOS SETUP UTILITY...........................................30

3-1 SOYO COMBO SETUP .........................................32

3-2 STANDARD CMOS SETUP ...................................38

3-3 BIOS FEATURES SETUP......................................41

3-4 CHIPSET FEATURES SETUP...............................46

3-5 POWER MANAGEMENT SETUP...........................49

3-6 PNP/PCI CONFIGURATION SETUP......................53

3-7 LOAD SETUP DEFAULTS .....................................56

3-8 INTEGRATED PERIPHERALS...............................57

3-9 SUPERVISOR PASSWORD ..................................62

3-10 USER PASSWORD ...............................................63

3-11 IDE HDD AUTO DETECTION................................64

CHAPTER 4 DRIVERS INSTALLATION......................................65

Motherboard Features SY-6BA+ III

SY-6BA+ III MOTHERBOARD LAYOUT

Back Panel SY-6BA+ III Platform

COM 1

COM 2

PRT

USB 1USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector JP10

PCI Slot #1

PCI Slot #2

PCI Slot #3

PCI Slot #4

PCI Slot #5

ISA Slot #1

ISA Slot #2

JP5

JP1

JP8LED1

Lithium

Battery

JP44

SB-LINK

(PC PCI)

IR1

CPUFAN

PWRFAN

ITE 8671

I/O Chipset

CHAFAN

IDE 1

IDE 2

FDC

AGP Slot

ATX

Power

Speaker

Keylock

Power

LED

Reset

PWRBT

Turbo

LED

HDD LED

Flash BIOS

Slot 1

Intel

82371 EB

DIMM 1

DIMM 2

DIMM 3

DIMM 4

828A C

Hardware

Monitoring

Winbond

W83782M

Intel

82443 BX

Introduction SY-6BA+ III

Chapter 1

INTRODUCTION

The SY-6BA+ III AGP/PCI Motherboard is a high-performance Slot

1 processor supported ATX form-factor system board. SY-6BA+ III

uses the 82440 BX Chipset technology and supports Slot 1

processors. This Motherboard is fully compatible with industry

standards and adds many technical enhancements.

1-1 KEY FEATURES

Supports Intel Pentium® III processor (450-550MHz), Pentium® II

processor (233-450MHz) & CeleronTM processor (266-433MHz))

Jumperless and CPU core voltage Adjustable

PC98, ACPI, Ultra DMA/33

Power-on by modem or alarm

SOYO COMBO Setup

Supports Wake-On-LAN (WOL)

Supports onboard hardware monitoring and includes Hardware

Doctor™utility

Supports Creative SB-LINK™for PCI audio card

1 x 32-bit AGP slot

5 x 32-bit bus mastering PCI slots

2 x USB ports onboard

1 x IrDA port

Supports multiple-boot function

Y2K Compliant

Supports Power Failure Resume (Optional)

Introduction SY-6BA+ III

SY-6BA+ III PLATFORM FEATURES

Board Size 4-layer PCB, 19x30.5cm(7.5”x12”), ATX Form

Factor

Slot1 Slot 1 for Pentium®

III, Pentium®

II & Celeron

Processor

ØSupports the following processors

u100MHz FSB

Pentium®

II 350/400/450 MHz

Pentium®

III 450/500/550 MHz

u66MHz FSB

Pentium®

II 233/266/300/333 MHz

Celeron300A/333/366/400/433 MHz

Celeron266/300 MHz

ØSupports both boxed and non-boxed type of CPUs

ØIncludes a CPU mount kit with retention clip

ØFeatures Auto-detection of CPU voltage

Chipset 82440 BX AGP Set

ATX Power 20-pin Male Connector

CPUFAN 3-pin CPU Cooling Fan Connector

Memory DIMM Bank (DIMM1~4)

ØFour strips of 168-pin Unbuffered SDRAM DIMM

ØSupports 8/16/32/64/128/256MB DIMM modules in

each bank

ØProvides up to 1 Gbytes of main memory

ØSupports ECC configuration

BIOS System BIOS built-in, Award BIOS

ØAPM, ACPI and "Plug-and-Play" function

ØSupports multiple-boot function

ØOnboard FLASH memory for easy upgrade

ØY2K Compliant

Bus Controller Compliant with version 2.1 PCI specifications

PCI Slots 5 x 32-bit Bus Mastering Slots

AGP Slot 1 x 32-bit AGP Slot

ISA Slots 2 x 16-bit ISA Slots

Introduction SY-6BA+ III

IDE1, IDE2 2 x 40-pin Bus Mastering E-IDE/ATAPI Ports

ØIDE1: Primary IDE Device Connector

ØIDE2: Secondary IDE Device Connector

ØSupports Ultra DMA/33

FDC 1 Floppy Disk Drive (FDD) Port

(Supports 1.2MB/1.44MB/2.88MB and LS120/3-mode FDD)

IR1 5-pin Serial Infrared Device Header

Keylock 5-pin KeyLock Header

Reset 2-pin Reset Switch Header

Speaker 4-pin PC Speaker Header

TB_LED 2-pin Turbo LED Header

HDD_LED 2-pin IDE Device LED Header

PWRBT ATX Power On/Off Switch 2-pin Header

JP1 External Suspend Button

JP5 CMOS Clear Jumper

JP8 CPU multiplier release Jumper

JP10 Power On by Keyboard Jumper

JP44 WOL (Wake-On-LAN) 3-pin Header

LED 1 5V Stand-by indicator LED

SBLINK™PCI Audio Card Header (PC-PCI)

SY-6BA+ III BACK-PANEL FEATURES

PRT 1 x Onboard 25-pin Female Parallel Printer Port

ØECP/EPP/SPP multi-mode parallel printer port

COM1, COM2 2 x Onboard RS-232 Serial Ports

ØFeature 2 x high-speed UARTs (with 16550 FIFO)

PS/2 KB 1 x Onboard PS/2 Keyboard Connector

PS/2 Mouse 1 x Onboard PS/2 Mouse Connector

USB1, USB2 2 x Onboard USB

(Universal Serial Bus)

Connectors

Introduction SY-6BA+ III

1-2 HANDLING THE MOTHERBOARD

To avoid damage to your Motherboard, follow these simple rules

while unpacking:

ØBefore handling the Motherboard, ground yourself by grasping

an unpainted portion of the system's metal chassis.

ØRemove the Motherboard from its anti-static packaging. Hold

the Motherboard by the edges and avoid touching its

components.

ØCheck the Motherboard for damage. If any chip appears loose,

press carefully to seat it firmly in its socket.

Warning: Do not apply power if the Motherboard appears

damaged. If there is damage to the board, contact your

dealer immediately.

1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS

Make sure to ground yourself before handling the Motherboard or

other system components. Electrostatic discharge can easily

damage the components. Note that you must take special

precautions when handling the Motherboard in dry or air-conditioned

environment.

To protect your equipment from electrostatic discharge, take the

following precautions:

ØDo not remove the anti-static packaging until you are ready to

install.

ØGround yourself before removing any system component from its

protective anti-static packaging. (To ground yourself, grasp the

expansion slot covers or other unpainted portions of the computer

chassis.)

ØFrequently ground yourself while working or use a grounding strap.

ØHandle the Motherboard by its edges and avoid touching its

components.

Hardware Setup SY-6BA+ III

Chapter 2

HARDWARE SETUP

Congratulations on your purchase of SY-6BA+ III Motherboard. You

are about to install and connect your new Motherboard.

Note: Do not unpack the Motherboard from its protective

anti-static packaging until you have made the following

preparations.

2-1 PREPARATIONS

Gather and prepare all the following hardware equipment to

complete the installation successfully:

1. Slot 1 processor with built-in CPU cooling fan (boxed type).

Note: This Motherboard supports non-boxed type CPUs. The

heavier CPU cooling fan requires the installation of a CPU

support stand.

2. DIMM memory module

3. Computer case and chassis with adequate power supply unit

4. Monitor

5. PS/2 Keyboard

6. Pointing Device (PS/2 mouse)

7. Speaker(s) (optional)

8. Disk Drives: HDD, CD-ROM, Floppy drive…

9. External Peripherals: Printer, Plotter, and Modem (optional)

10. Internal Peripherals: Modem and LAN cards (optional)

Hardware Setup SY-6BA+ III

2-2 UNPACKING THE MOTHERBOARD

When unpacking the Motherboard, check for the following items:

uThe SY-6BA+ III 82440 BX AGP/PCI

Motherboard

uThis User’s Manual

uThe Installation CD-ROM

uThe CPU Retention Set

uOne IDE Device Flat Cable

uOne Floppy Disk Drive Flat Cable

Warning: Do not unpack the Motherboard from its anti-static

packaging until you are ready to install it.

Like most electronic equipment, your Motherboard may be damaged

by electrostatic discharge. To avoid permanent damage to

components ground yourself while working by using a grounding

strap. Otherwise, ground yourself frequently by touching the

unpainted portion of the computer chassis to drain the static

charges.

Handle the Motherboard carefully, holding it by the edges.

You are now ready to start the installation.

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-7IZB+N Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4I845PE Bedienungsanleitung

SOYO

SOYO Super 7 V1.0 Bedienungsanleitung

SOYO

SOYO Pentium SiS 551x Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7VMA-B Bedienungsanleitung

SOYO

SOYO SY-6VZA Bedienungsanleitung

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-P4VGM V1.0 Bedienungsanleitung

SOYO

SOYO SY-6BA+III Bedienungsanleitung

SOYO

SOYO SY-7VDA Bedienungsanleitung

SOYO

SOYO SY-5EMA+ Bedienungsanleitung

SOYO

SOYO SY-6IZA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4VDA Bedienungsanleitung

SOYO

SOYO SY-6IZM Bedienungsanleitung

SOYO

SOYO SY-6BA+ Bedienungsanleitung

SOYO

SOYO 5ehm Bedienungsanleitung

SOYO

SOYO SY-6IEB Gebrauchs- und Pflegehandbuch

SOYO

SOYO LI-7000 Bedienungsanleitung

SOYO

SOYO SY-6BA+ Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-5SSM Bedienungsanleitung

SOYO

SOYO SY-P4I845PE Bedienungsanleitung

SOYO

SOYO SY-P4ISR Bedienungsanleitung

SOYO

SOYO SY-6ILA Gebrauchs- und Pflegehandbuch

SOYO

SOYO 5EAS5 Gebrauchs- und Pflegehandbuch

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung