SOYO SY-6BE Bedienungsanleitung

SY-6BE+

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-6BE+ Motherboard

Pentium

III, Pentium

II & Celeron

processors

82440 BX AGP/PCI Motherboard

66&100MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their

owners.

Product Rights:

Product and corporate names mentioned in this publication are used for identification purposes

only and may be registered trademarks or copyrights of their respective companies.

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to revise the manual or make changes in the specifications of the

product described within it at any time without notice and without obligation to notify any

person of such revision or change. The information contained in this manual is provided for

general use by our customers. Our customers should be aware that the personal computer field is

the subject of many patents. Our customers should ensure that their use of our products does not

infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights

of third parties and not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide is for assisting system manufacturers and end users in setting up and

installing the Motherboard. Information in this guide has been carefully checked for reliability;

however, no guarantee is given as to the correctness of the contents. The information in this

document is subject to change without notice.

If you need any further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

6BE+ Serial - Version 2.4 - Edition: December 1999

*Thesespecificationsaresubjecttochangewithoutnotice

SY-6BE+

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-6BE+

Motherboard.ThisQuickStartGuide

describesthestepsforinstallingandsettingupyournewMotherboard.

ThisguideisdesignedforalluserstoprovidethebasicstepsofMotherboardsettingand

operation.Forfurtherinformation, pleasereferto SY-6BE+MotherboardUser'sGuideand

TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyour

Motherboard.

Unpacking

WhenunpackingtheMotherboard,checkforthefollowingitems:

TheSY-6BE+82440BXAGP/PCIMotherboard

TheQuickStartGuide

TheInstallation CD-ROM

SOYO3-in-1BonusPackCD-ROM(Norton AntiVirus,

GhostandVirtualDrive)

TheCPURetentionSet

OneIDEDeviceFlat Cable

OneFloppyDiskDriveFlatCable

SY-6BE+ Quick Start Guide

Introduction

SY-6BE+ Motherboard Layout

Key Features

SupportsIntelPentium

IIIprocessor(450-

600MHz), Pentium

IIprocessor(233-450MHz)

& Celeron

processor(266-433MHz)

)

Auto-detect CPU voltage

PC98, ACPI, Ultra DMA/33

Power-on by modem, alarm or keyboard

SOYO COMBO Setup

SupportsWake-On-LAN(WOL)

Supports onboard hardware monitoring and

includes Hardware Doctor™utility

Supports Creative SB-LINK™(PC-PCI) for PCI

audio card

1 x 32-bit AGP slot

4 x 32-bit bus master PCI slots

2 x USB ports onboard

1 x IrDA port

Supportsmultiple-bootfunction

Y2K Compliant

COM 1

COM 2

PRT

USB 1USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector JP10

PCI Slot #1

PCI Slot #2

PCI Slot #3

PCI Slot #4

ISA Slot #2

ISA Slot #1

ISA Slot #3

JP5

JP44

Intel

82371 EB

Intel

82443 BX

IR1

CPUFAN

Ultra

I/O Chipset

CHAFAN

IDE 1

IDE 2

FDC

Slot 1 for

PentiumIIProcessor

AGP Slot

ATX

Power

DIMM 1

DIMM 2

DIMM 3

Speaker

Keylock

Power

LED

Reset

PWRBT

Turbo

LED

HDD LED

BIOS Flash

Wake on

LAN

SB-LINK

(PC-PCI)

Slot 1

SY-6BE+

Quick Start Guide

Hardware

Installation

ToavoiddamagetoyourMotherboard,followthesesimpleruleswhilehandling

thisequipment:

BeforehandlingtheMotherboard,groundyourselfbygraspinganunpaintedportion

ofthesystem'smetalchassis.

RemovetheMotherboardfromitsanti-staticpackaging.Holditbytheedgesand

avoidtouchingitscomponents.

ChecktheMotherboardfordamage.Ifanychipappearsloose,presscarefullytoseat

itfirmlyinitssocket.

Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect

installationofyournew

SY-6BE+

Motherboard.Fordetailedinformation,pleasereferto SY-

6BE+MotherboardUser'sguideandTechnical Reference onlinemanualincludedonthe

CD-ROMpackedwithyourMotherboard.

PREPARATIONS

Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation

successfully:

Slot1processorwithbuilt-inCPUcoolingfan(boxedtype)

SDRAMmodule

Computercaseandchassiswithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice(PS/2mouse)

VGACard

SoundCard(optional)

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM,Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem-(optional)

InternalPeripherals:ModemandLANcards(optional)

SY-6BE+ Quick Start Guide

Hardware

Installation

Install the Motherboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-6BE+

Motherboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPU

thatshouldbeclearlymarkedontheCPUcover.

FSB66MHz

266MHz(66 x4.0) 333MHz (66 x 5.0) 400MHz(66 x6.0)

300MHz(66 x4.5) 366MHz (66 x 5.5) 433MHz(66 x6.5)

FSB100MHz

350MHz(100 x 3.5) 450MHz (100 x 4.5) 550MHz (100 x 5.5)

400MHz(100 x4.0) 500MHz (100 x 5.0) 600MHz(100 x6.0)

CPU Mount Procedure:

Tomounttheprocessorthatyouhavepurchased

separately,followtheseinstructions.

Retention Module Step 1. Open the two sides by folding them up.

Step 2. Insert the CPU into the retention

module. The CPU fits in the CPU

slot in only ONE way, do not try to

force it in.

Step 3. After completely inserting the CPU,

Now your CPU is ready for use.

Note:Installing a heat sink andcooling fan ontop ofyour CPU isnecessary forproper heat dissipation.Failing to

installthese items mayresult in overheatingandpossible burn-out ofyour CPU.

SY-6BE+

Quick Start Guide

Hardware

Installation

Step 2. Make Connections to the Motherboard

ThissectiontellshowtoconnectinternalperipheralsandpowersupplytotheMotherboard.

InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,ChassisFan,

FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock

Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6BE+

Motherboard, pleaserefer to SY-6BE+MotherboardUser'sGuideandTechnicalReference

onlinemanualonCD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link™(PC-PCI) Wake-On-LAN Header: JP44

Pin1 Pin2 Pin3Connect the SB-Link™(PC-PCI) cable from your

PCI audio card to this header. 5VSB GND MP-Wakeup

CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND 12V SENSOR GND 12V SENSOR

Power LED Keylock

Pin1 Pin2 Pin3

Pin1 Pin2

5V NC GND

ControlPin GND

Speaker

Pin1 Pin2 Pin3 Pin4

5V NC NC Speakerout

HDD LED Turbo LED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LEDAnode LED Cathode LED Cathode GND PowerOn/Off GND Power Good GND

IrDA (Infrared Device Header): IR1

Pin1 Pin2 Pin3 Pin4 Pin5

VCC None IRRX GND IRTX

ATX Power On/Off: PWRBT ATX Power Supply: ATX PW

Connect your power switch to

this header (momentary switch

type).

To turn off the system, please

press this switch and hold

down for longer than 4

seconds.

Attach the ATX Power cable to this connector. (This

motherboardrequiresanATXpowersupply,anATpower

supplycan NOTbeused.)

Note:Please make surethe ATXpower supply isable to

provideat least 720mAof current onthe +5VSB leadif you

wantto enablethe advanced powermanagement

functions,likeWake-On-LAN, Power-On bykeyboard,etc.

Power LED

Key Lock

Speaker

Reset

PWRBT

Turbo LED

HDD LED

SY-6BE+ Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

YourboardcomeswiththreeDIMMsockets,providingsupportforupto768MBofmain

memoryusingDIMMmodulesfrom8MBto256MB.For66MHzfrontsidebusCPUsuse

12nsorfastermemory;for100MHzfrontsidebusCPUsuse8ns(100MHz,PC100

compliant)memory.

Memory Configuration Table

Number of Memory Modules DIMM 1 DIMM 2 DIMM 3

11st

21st 2nd

31st 2nd 3rd

RAM Type SDRAM

Memory Module Size (MB) 8/16/32/64/128/256 Mbytes

Note:(1) 256 MB memory modules only available on PC registered DIMM.

(2) Always install memory modules in the order prescribed in this table.

(3) Do not install unbuffered and registered memory modules together.

Important:

ItisofprimeimportancethatyouinstallDIMMmodulesasoutlinedinthetable

aboveinordertopreservesignalintegrityon100MHzfrontsidebussystems.

Step 4. Set the CPU Frequency

ThisMotherboarddoesnotuseanyjumperstosettheCPUfrequency,CPUsettingare

changedthroughtheBIOS[SOYOCOMBOSETUP].RefertoChapter3 “QuickBIOS

Setup”fordetailsonhowtosettheSlot1processorfrequency.

Step 5. Enable/Disable Power-On by Keyboard (JP10)

YoucanchoosetoenablethePower-OnbyKeyboardfunctionbyshortingpin1-2onjumper

JP10,otherwise,shortpin2-3todisablethisfunction.

Power-On by

Keyboard Enable Disable

JP10 Setting Short pin 1-2 to enable the

Power-On by Keyboard function. Short pin 2-3 to disable the

Power-On by Keyboard function.

Important: When using the Power-On by Keyboard function, please make sure the

ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to

meet the standard ATX specification.

SY-6BE+

Quick Start Guide

Hardware

Installation

Step 6. Clear CMOS Data (JP5)

CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5

seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily

identifiedbyitswhitecoloredcap.

CMOS Clearing Clear CMOS Data Retain CMOS Data

JP5 Setting Short pin 2-3 for

at least 5 seconds

to clear the CMOS.

Short pin 1-2

to retain the

new settings.

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

Note on Over-clocking Capability

TheSY-6BE+providesover-clockingcapability.Duetotheover-clockingsettingyoursystem

mayfailtobootuporhangduringruntime.Pleaseperformthefollowingstepstorecover

yoursystemfromtheabnormal situation:

Turnoffsystempower.(IfyouuseaATXpowersupply,sometimesyouhavetopressthe

powerbuttonformorethen4secondstoshutdownthesystem)

Pressandholddownthe<Insert>keywhileturningonthesystempower.Keepholding

downthe<Insert>keyuntilyouseethemessageoftheCPUtypeandfrequencyshown

onthescreen.

Pressthe<Del>keyduringthesystemdiagnosticcheckstoentertheAwardBIOSSetup

program.

Select[SOYOCOMBOSETUP]andmovethecursortothe[CPUFrequency]fieldtoset

theproperworkingfrequency.

Select[Save&ExitSETUP]andpress<Enter>tosavethenewconfigurationtothe

CMOSmemory,andcontinuethebootsequence.

Note: SOYOdoesnotguaranteesystem stability if the user over clocksthesystem.

Anymalfunctionsduetoover-clocking are notcoveredbythewarranty.

SY-6BE+ Quick Start Guide

Quick BIOS

Setup

Quick BIOS Setup

ThisMotherboarddoesnotuseanyhardwarejumperstosettheCPUfrequency.Instead,

CPUsettingsaresoftwareconfigurablewiththeBIOS

[SOYO COMBO SETUP].

The

[SOYOCOMBOSETUP]menucombinesthemainparametersthatyouneedtoconfigure,

allinonemenu,foraquicksetupinBIOS.

Afterthehardwareinstallationiscomplete,turnthepowerswitchon, thenpress the

<DEL>

key

duringthesystemdiagnostic checksto entertheAwardBIOSSetupprogram.The CMOS

SETUPUTILITYwilldisplayonscreen.Then,followthesestepsto configurethe CPUsettings.

Step 1. Select [STANDARD CMOS SETUP]

Set[Date/Time]and[Floppydrivetype],then set[HardDiskType] to “Auto”.

Step 2. Select [LOAD SETUP DEFAULT]

Selectthe“LOADSETUPDEFAULT”menuandtype“Y”attheprompttoloadtheBIOS

optimalsetup.

Step 3. Select [SOYO COMBO SETUP]

Movethecursortothe

[CPUFrequency]

fieldtosettheCPUfrequency.

Available[CPUFrequency]settingsonyourSY-6BE+Motherboardaredetailedinthe

followingtable.Ifyousetthisfieldto[Manual],youarethenrequiredtofillinthenexttwo

consecutivefields:(1)theCPUHost/PCIClock,and(2)theCPURatio.

CPU Frequency

233MHz (66 x 3.5) 350MHz (100 x 3.5)

266MHz (66 x 4.0) 400MHz (100 x 4.0)

300MHz (66 x 4.5) 450MHz (100 x 4.5)

333MHz (66 x 5.0) 500MHz (100 x 5.0)

366MHz (66 x 5.5) 550MHz (100 x 5.5)

400MHz (66 x 6.0) 600MHz (100 x 6.0)

433MHz (66 x 6.5)

Select the working frequency of

your Pentium®

III, Pentium®

II,

Celeronprocessor among these

preset values.

Note: Mark the checkbox that

corresponds to the working

frequency of your Pentium®

III,

Pentium®

II, Celeronprocessor in

case the CMOS configuration

should be lost.

Note:

ifyouuseBusFrequenciesof75MHz,makesurethatyourPCIcardscancopewith

thehigherPCIclock.

Step 4. Select [SAVE & EXIT SETUP]

Press

<Enter>

tosavethenewconfigurationtotheCMOSmemory,andcontinuetheboot

sequence.

Andere Handbücher für SY-6BE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-K7VIA Bedienungsanleitung

SOYO

SOYO SY-6ZE+ Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4VTP Bedienungsanleitung

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-P4ISR Bedienungsanleitung

SOYO

SOYO SY-K7ADA Bedienungsanleitung

SOYO

SOYO SY-P4I Fire DRAGON Bedienungsanleitung

SOYO

SOYO SY-7VCA Bedienungsanleitung

SOYO

SOYO SY-TISU Bedienungsanleitung

SOYO

SOYO 82430 HX / P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7ISA+ Bedienungsanleitung

SOYO

SOYO SY-K7VEM+ Bedienungsanleitung

SOYO

SOYO Super 7 SY-5EMA Bedienungsanleitung

SOYO

SOYO SY-V6BE+ Bedienungsanleitung

SOYO

SOYO Pentium SiS 551x Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-K8USA DRAGON Ultra Bedienungsanleitung

SOYO

SOYO SY-P4VTE Bedienungsanleitung

SOYO

SOYO SY-7VMA-B Bedienungsanleitung

SOYO

SOYO SY-P4I845PE Bedienungsanleitung

SOYO

SOYO SY-K7AIA Bedienungsanleitung

SOYO

SOYO SY-D6IGA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-P4S DRAGON Ultra Bedienungsanleitung

SOYO

SOYO SY-P4VM800 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung