SOYO SY-7VBA 133 Bedienungsanleitung

SY-7VBA 133

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-7VBA 133 Motherboard

Socket 370 for Intel Pentium® & Celeron

processors

VIA Apollo Pro 133 AGP/PCI Motherboard

66/100/133 MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification

purposes only. The registered trademarks and copyrights belong to their respective companies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customers should be aware that the personal computer field is subject to many patents. All of

our customers should ensure that their use of our products does not infringe upon any patents. It

is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing

the Motherboard. Information in this guide has been carefully checked for reliability; however,

to the correctness of the contents there is no guarantee given. The information in this document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

7VBA 133 Serial - Version 1.5 - Edition: May 2001

* These specifications are subject to amend without notice

SY-7VBA 133

Quick Start Guide

Introduction

Congratulations on your purchase of the

SY-7VBA 133

Motherboard. This Quick Start Guide

illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For

further information, please refer to the SY-7VBA 133 Motherboard User’s Manual that came

with your Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:



The SY-7VBA 133 VIAApollo Pro 133 AGP/PCI Motherboard



The Quick Start Guide



The Installation CD-ROM



SOYO Bonus Pack CD-ROM



One IDE Device ATA 66 Flat Cable



One Floppy Disk Drive Flat Cable

SY-7VBA 133 Quick Start Guide

Introduction

SY-7VBA 133 Motherboard Layout

(Optional)

Speaker

Power

LED

HDD

LED

ResetPWRBT

PCI Slot #1

PCI Slot #3

PCI Slot #4

PCI Slot #5

CPUFAN

IDE 1 IDE 2

FDC1

ATX Pow er

Socket 370

DIMM 2

DIMM 3

DIMM 1

PCI Slot #2

CHAFAN

SDRAM

□

T82C693A

AGP Slot

Lithium

Battery

SIRCON

JP10

USB4

USB3

CDIN1

CDIN2

ISA Slot #2

ISA Slot #1

CODEC

AC97

□

T82C686A

Flash BIOS

JP5

CJ2

VJ1

JP6 JP7

CJ1

USB 1 USB 2

PS/2 KB

ConnectorPS/2 Mouse

Connector

LINE-OUT

LINE-IN

MIC JACK

JOYSTICK

COMB

PRT

COM A

SY-7VBA 133

Quick Start Guide

Introduction

Key Features



Supports Intel® processors

- FSB 66MHz: Celeron



(400-700MHz)

- FSB 100MHz: Pentium® III

(500-850MHz)

- FSB 133MHz: Pentium® III

(533-933MHz)



Supports 66/100/133 MHz Front Side

Bus Frequency



Auto-detect CPU voltage



Easy CPU settings in BIOS with the

“SOYO COMBO Setup”



PC99, ACPI



Ultra DMA33/66 (ATA 33/66)



Supports Wake-On-LAN (WOL)



Power-on by modem and alarm



Supports onboard hardware monitoring



Support AC97 Audio



Support 5 sets of voltage monitoring



Supports multiple-boot function



CPU Power Up Function (4 Set)



2 x 16-bit ISA slots



5 x 32-bit bus mastering PCI slots



1 x 32-bit AGP slot



4 x USB ports onboard



1 x IrDA port



ATX power connector



Hardware Random Number Generator

(RNG) for enabling enhanced platform

security

SY-7VBA 133 Quick Start Guide

Hardware

Installation

To avoid damage to your Motherboard, please follow these simple rules while

handling this equipment:



Before handling the Motherboard, ground yourself by touching on to an unpainted

portion of the system's metal chassis.



Remove the Motherboard from its anti-static packaging. Hold the motherboard by the

edges and avoid touching its components.



Check the Motherboard for damage. If any chip appears to be loose, press carefully

to seat it firmly in its socket.

Follow the directions in this section which is designed to guide you through a quick and

correct method to install your new

SY-7VBA 133

Motherboard. For detailed information,

please refer to the SY-7VBA 133 Motherboard User's Manual and Technical Reference

online manual on the CD-ROM package that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully:



Pentium® Socket370 processor with built-in CPU cooling fan (boxed type)



SDRAM module(s)



Computer case with adequate power supply unit



Monitor



PS/2 Keyboard



Pointing Device (PS/2 Mouse)



Speaker(s) (optional)



Disk Drives: HDD, CD-ROM, Floppy drive…



External Peripherals: Printer, Plotter, and Modem (optional)



Internal Peripherals: Modem and LAN cards (optional)

Note: 1.

If you want to use an external speaker connected to "Line-out" port, please make

sure to use an "amplified speaker" that can generate proper output sound volume.

SY-7VBA 133

Quick Start Guide

Hardware

Installation

Install the Motherboard

To perform the installation of your new

SY-7VBA 133

Motherboard, follow the steps below:

Step 1. CPU Installation

Mark your CPU Frequency:

Record the working frequency of your CPU that

should be clearly marked on the CPU cover.

FSB 66MHz

400MHz (66 x 6.0) 466MHz (66 x7.0) 533MHz (66 x 8.0) 600MHz (66 x 9.0) 667MHz (66 x 10.0)

433MHz (66 x 6.5) 500MHz (66 x7.5) 566MHz (66 x 8.5) 633MHz (66 x 9.5) 700MHz (66 x 10.5)

FSB 100MHz

500MHz (100 x 5.0) 600MHz (100 x 6.0) 700MHz (100 x 7.0) 800MHz (100 x 8.0)

550MHz (100 x 5.5) 650MHz (100 x 6.5) 750MHz (100 x7.5) 850MHz (100 x 8.5)

FSB 133MHz

533MHz (133 x 4.0) 667MHz (133 x 5.0) 800MHz (133 x 6.0) 933MHz (133 x 7.0)

600MHz (133 x 4.5) 733MHz (133 x 5.5) 866MHz (133 x 6.5)

CPU Mount Procedure:

To mount the Pentium® & Celeron

processor that you

have purchased separately, follow these instructions.

1. Lift the socket handle up to a vertical position.

2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.

3. Seat the processor in the socket completely and without forcing.

4. Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power

connector on the Motherboard. The fan is a key component that stabilizes the

system. It prevents the equipment from overheating and prolongs the life of

your CPU.

1 2

3 4

Socket370

SY-7VBA 133 Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,

Chassis Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.),

Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-7VBA 133

Motherboard, please refer to SY-7VBA 133 Motherboard User's Manual and Technical

Reference online manual on the CD-ROM.

Connectors and Plug-ins

Wake-On-LAN Header: JP10 Standard IrDA (Infrared Device Header): SIRCON

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin4 Pin5

5VSB GND MP-Wakeup VCC None IRRX GND IRTX

CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND 12V SENSOR GND 12V SENSOR

USB3 USB4

Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3 Pin4 Pin5

Power Data(-) Data(+) GND Power Data(-) Data(+)

GND GND

CD Line-in: CDIN1, CDIN2 Pin 1 Pin 2 Pin 3 Pin 4

CDIN2 R G L GConnect the CD Line-in cord from the CD-ROM device to

the matching header CDIN1 or CDIN2. CDIN1 R G G L

Power LED

Pin1 Pin2 Pin3

5V NC GND

Speaker

Pin1 Pin2 Pin3 Pin4

5V NC NC Speaker out

HDD LED SB LED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LED Anode LED Cathode LED Cathode LED Anode Power On/Off GND Power Good GND

ATX Power On/Off: PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, press this switch and hold down for longer than 4 seconds.

ATX Power Supply: ATX PW

Attach the ATX Power cable to this connector. (This motherboard requires an ATX power supply, an AT

power supply can NOT be used.)

When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to

provide at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.

Power LED Speaker

Reset PWRB

SB LED HDD LED

SY-7VBA 133

Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

Your board comes with three DIMM sockets, providing support for up to 1.5GB of main

memory using unbuffered and registered DIMM modules from 8MB to 512MB. On this

motherboard, DRAM speed can be set independent from the CPU front side bus speed.

Depending on the DRAM clock speed setting in the BIOS setup, appropriate memory

modules must be used. For 66MHz DRAM speed, use PC66 memory; for 100MHz DRAM

speed, use PC100 memory; for 133MHz DRAM speed, use PC133 memory.

Memory Configuration Table

Number of

Memory Modules DIMM 1 DIMM 2 DIMM 3

RAM Type EDO/ SDRAM/ VCM SDRAM

Memory Module

Size (MB) 8/16/32/64/128/256/512 MB

Step 4. CPU Core Voltage Adjust (VJ1)

In case your CPU is running on a frequency higher then it is specified for, increasing its core

voltage can enhance its stability. Over-clocking your CPU does however force your system

to operate outside of its specifications, and therefore SOYO can not guarantee system

stability.

CPU Core Voltage Adjust VJ1 Setting

Default Vcore

Short pin 1-2

3% higher

Short pin 2-3

6% higher

Short pin 4-5

10% higher

Short pin 5-6

SY-7VBA 133 Quick Start Guide

Hardware

Installation

Step 5. CPU AJ33 and AJ31 Settings: JP6, JP7, CJ1 and CJ2

For certain Intel CPUs, the multiplier is not locked such that setting a multiplier higher than

specified on the CPU is possible. For technical details read the following:

Your PII /III 100/66 MHz FSB CPU has a pin AJ33 (100/66# signal) to tell it what FSB

frequency the CPU requires; The PIII 133 MHz FSB CPU has two pins AJ33and AJ31

(133/100# signal). JP6 and JP7 are connected to the AJ33 and AJ31 input respectively and

are used to tell the motherboard what the CPU FSB frequency is. If these two jumpers are

shorted the motherboard will automatically run at the frequency the CPU was specified to

run at.

However, the FSB Frequency can also be set through jumpers CJ1 and CJ2 and it may

therefore differ from the Frequency the CPU specifies. If CJ1 and CJ2 are to be used, JP6 &

JP7 must be open. Doing so may however force your CPU to operate out of its

specifications and therefore SOYO can not guarantee the proper functioning of your system.

Refer to the following table:

CPU Frequency JP6 JP7 CJ1 CJ2

Automatic

Short

Short Open Open

66MHz

Open Open 2-3 2-3

100MHz

Open Open 1-2 2-3

Manual

133MHz

Open Open 1-2 1-2

12 3

12 12

12 3

12 3 12 3

12 3

123

Andere Handbücher für SY-7VBA 133

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-7IZM Bedienungsanleitung

SOYO

SOYO SY-7VEM Bedienungsanleitung

SOYO

SOYO SY-7IWA-F Bedienungsanleitung

SOYO

SOYO 486 PCI/VESA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6IEB Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4RS300 Bedienungsanleitung

SOYO

SOYO SY-7IZM Bedienungsanleitung

SOYO

SOYO SY-7VBA133U Bedienungsanleitung

SOYO

SOYO 6BE+ Bedienungsanleitung

SOYO

SOYO SY-K7ADA Bedienungsanleitung

SOYO

SOYO SY-K7VME Bedienungsanleitung

SOYO

SOYO DRAGON Lite SY-KT333 Bedienungsanleitung

SOYO

SOYO Super 7 SY-5EMA Bedienungsanleitung

SOYO

SOYO SY-6BA+ Bedienungsanleitung

SOYO

SOYO SY-6ILA Bedienungsanleitung

SOYO

SOYO SY-6IEB Bedienungsanleitung

SOYO

SOYO 6KD Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4I875P DRAGON 2 V1.0 Bedienungsanleitung

SOYO

SOYO SY-7VCA-E Bedienungsanleitung

SOYO

SOYO SY-P4I Fire DRAGON Bedienungsanleitung

SOYO

SOYO SY-P4I875P DRAGON 2 V1.0 Bedienungsanleitung

SOYO

SOYO SY-KT333 DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-6VZA Bedienungsanleitung

SOYO

SOYO Super 7 SY-5EMA Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung