Spark MF65+ Bedienungsanleitung
Spark MF65 User Manual v1.0 Page 2 of 25
CHECK YOUR SYSTEM REQUIREMENTS
Your Wi-Fi router will connect to any device that supports Wi-Fi, 802.11 b/g/n
A web browser is required to log in to your Wi-Fi router if you wish to make any
configuration changes.
USB driverless connection is also supported for Windows, MAC and LINUX operating
systems:
•Windows 8 (not including RT) / 7 / XP / Vista
•MAC OS X 10.5 to 10.10
•Linux
Using the USB connection requires administrator rights to install and run the software.
We suggest you switch off your anti-virus software before connecting the router - In
some cases protection software can prevent automatic installation.
It is possible to start the installation process manually by clicking the Autorun icon
when it appears.
GET TO KNOW YOUR WI-FI HOTSPOT
Spark MF65 User Manual v1.0 Page 3 of 25
INSERT YOUR SIM CARD
1. Slide the back cover down to access the SIM and memory card slots.
2. Insert your SIM card carefully as shown:
3. If you want to add a memory card you can do it now. Your USB device supports
up to 32GB microSD(HC)™ memory.
4. Insert the battery with the gold contacts lined up with the gold springs and slide
the cover back on.
5. You are now ready to power up your device and you’ll be on-line in no time.
Notes
•Adding a memory card is optional
•microSD™ up to 2GB are FAT 16 format.
•microSDHC™ up to 32GB are FAT 32 format.
Handy hint
Remember to keep your plastic SIM card holder. It has a record of your PIN
number which you should keep handy.
Spark MF65 User Manual v1.0 Page 4 of 25
POWER UP YOUR WI-FI HOTSPOT
Press and hold the Power key for 3-4 seconds until the lights flash.
The Wi-Fi hotspot will start up in a few seconds. Check the condition of your Wi-Fi
hotspot as shown by the LED indicators.
LED DISPLAY OVERVIEW
CONNECT DEVICES BY WI-FI
Your Wi-Fi hotspot can connect up to ten devices via Wi-Fi providing internet
access for all your devices on the go.
•On the devices you wish to connect make sure Wi-Fi is switched on, then search
for Wi-Fi devices.
•The Wi-Fi router will show up as MF65+_xxxxxx, click on this device to connect.
•Consult the device display or make a note of the password under the battery
cover. Enter the unique password which is case sensitive. Any letters entered
must be in upper case (capitals).
•(Note showing the password on the display is optional, and can be switched off
using the web interface > Settings > Device Settings)
Connection example for Windows 7 computer:
1. On your task bar, next to the clock, click on the Network Interface icon
2. Click on the Wireless device MF65+_xxxxxx
3. Enter the password exactly as shown on the display (optional) and printed in
the battery compartment. (Passwords are case sensitive)
4. With Connect Automatically enabled your computer will remember the
password and connect to your Wi-Fi device when it is on and in range.
Spark MF65 User Manual v1.0 Page 5 of 25
Handy hint
It is also possible to connect via USB connection. See later for details.
QUICK REFERENCES
Browser home page http://192.168.0.1
Administrator login password
Default SSID MF65+_xxxxxx.
Shown on the display (optional) and printed in the
battery compartment
Default Security Key
10 characters which are case sensitive.
Shown on the display (optional) and printed in the
battery compartment
Restore defaults
From the powered up state:
Press & hold the power key and the WPS key
simultaneously, hold for about 10 seconds.
All passwords and settings will be restored to defaults
and the router will reboot.
Spark MF65 User Manual v1.0 Page 6 of 25
WEB INTERFACE LOGIN SCREEN
DEVICE HOMEPAGE
Open a browser and go to 192.168.0.1 to access the device homepage.
The default administrator login password is ‘password’
Spark MF65 User Manual v1.0 Page 7 of 25
HOMEPAGE ICONS
NOTE: A Red SIM card icon can mean any of the following states:
•SIM card is missing or incorrectly inserted. Remove the battery and check the
SIM card is inserted correctly.
•SIM card is PIN or PUK locked (Enter the PIN number, or contact your carrier for
the PUK code)
•SIM card is faulty
THE INFORMATION TAB
The Information tab shows the summary device status, how many devices are
connected by Wi-Fi and whether you are connected to the mobile broadband
network.
•The device will automatically connect to the network.
•To change this behaviour press Disconnect on the Home tab, then go to
Settings > Network Settings > Dial-up Settings, and select Manual.
•The number of devices connected to your Wi-Fi hotspot is displayed and you
can select to Block unwanted devices if required.
Spark MF65 User Manual v1.0 Page 8 of 25
SD CARD
•Enable Web Share to share the contents of your SD card with other users
connected to your device.
•Read only or Read / Write access can be configured.
•Custom sharing can be enabled to restrict access to certain paths.
•Press the Web Share button to view all the files.
Spark MF65 User Manual v1.0 Page 9 of 25
SMS
•Click in the top box to add Contacts
•You can enter Contact names in the Contacts field and the device will search and
list applicable matches
•Click in the bottom box to type your message
•Press the Send button when done
•Threaded messages (messages sent and received to the same Contact) are
displayed in the main panel.
•View SMS > SMS Settings to enable delivery reports and to check the SMS centre
number (read from your SIM card)
Spark MF65 User Manual v1.0 Page 10 of 25
PHONEBOOK
•Click Phonebook to view your SIM card contacts.
•Contacts are automatically read into the device but you can also copy and save
on your device.
•Select the Contact to view more details, click Edit to make any changes, then
select the Save location as Device.
•Contacts stored on the device can include additional fields.
•Select New to create a new contact and choose the save location as Device or
SIM card.
Andere Handbücher für MF65+
1
Inhaltsverzeichnis
Andere Spark WLAN-Router Handbücher
