Sparkular BT01 Bedienungsanleitung

SYDNEY FIREWORKS AND PYROTECHNICS PTY LTD.

User Manual

June 31, 2016

•Sparkular(BT01/BT02)

Description of Products

BT01/BT02 is a revolutionary special effect system. It uses a newly designed delivery control system for

a fountain style special effect and uses DMX communication and is compatible with other control

equipment.

Sparkular Part No.: BT01/BT02

Parameters:

Dimension: 200×215×285mm

Weight: 8kg

Input: 220Vac(BT01) or 110Vac(BT02), 50/60Hz

Work Power: 400w

Work Temp. : -20℃~ 50 ℃

Casing: ABS+PC

Fireworks Height: 1.0m ~ 5.0m

Fireworks angle to ground: 45°~90°

Lifetime: > 5 years

Interface type：double DMX input interfaces, double AC power interfaces

•Instructions

The Sparkular system has two main components. The Sparkular head BT02 and the Host Control

Console ZK6200. The BT02 has all safety features built into the smart feedback protocol that is

readable on the Sparkular machine as well as the Host control console.*Please note that if the

K6200 or the Pro controller is not used and another DMX console is used the read out function

for the console will not be able to be used.

The following descriptions will help to learn the operation and function of the working of both

the Sparkular head and the host controller.

•Brief introduction of the functions

•The Controlling Signal of International Standard: DMX 512

•Fixture uses Two Channels (Channel 1 controls effect & height 2 controls the Pre-Heat and Safety

feature).

•Adjustable Effect Height.

•Continuous feedback Protection for Overheating, redundant safeties for heat protection.

•Due to the onboard data transmission and logic integration of the operating system the Host

Controller supplies a continuous readout while the system is on.

DMX512 Signal Link:

Using DMX512 signal controlling mode and the controlling signals among each equipment are connected

in parallel, so it’s better to use shielded twisted paired cables when connecting many equipment together.

Each equipment is connected together through the DMX signal sockets (XLR connector) Input and

output, and the three pin XLRXL plug terminals connecting the equipment must be corresponding to each

other. When connecting to the device signals, it’s suggested to terminate the DMX signal so as to avoid

decaying the signal strength caused by the signal reflection. DMX signal terminator is a resistance of 102

ohms/1w connecting the number two and three pins on the XLR plug, the resistance is connected to the

output socket of the last device.

The definition of Three Pin XLRXL Plug: 1 Signal Ground line; 2 Signal-; 3 Signal+

Note:

•After the equipment starts up, it first needs to warm up. When the READY sign lights up, it indicates that

the equipment is ready. You can operate the effect machine.

•No foreign material (flammable) is allowed to cover the surface of the equipment, so as not to affect its

cooling or impede the operation of the fountain. Do not place anything on sides or top that would impede

cooling.

Operation Panel:

a. LCD information display area, showing action menu and operating status of the equipment.

b. LED Displaying Area：

READY: Flashing shows that the system is preparing, Solid Light shows that the system can

operate.

DMX: Flashing shows that the DMX signal is connected, no display shows that there is none

connected.

FAULT: Sign will light up when any error is detected.

HEAT : Sign will light up when the system is heating.

a. Control Button Area：

MENU: entering into the menu select

DOWN: parameter reduction

UP: parameter increase

ENTER: confirm and save all parameters

a. Interface and Plugging Area：

POWER IN: 110VAC Power Voltage Input

POWER OUT: 110VAC Power Voltage Switching Output

DMX IN: DMX Communication Signal Input

DMX OUT: DMX Communication Signal Switching Output

a. Radio Frequency Identification Area：

The Product Identification card/emblem attached to the spark granules determines the parameter

and type of the product that is identified through swiping the card.

Please note that the card enables the unit for 15-25 minutes of operation (which is the amount of

time each batch will last). The card supplied only works once and is unusable after it has been

swiped.

Interface

•Main Interface：

•Displays DMX Address.

•Displays the present temperature of the inner core.

•Displays the error information when it happens.

Error Information

Illustration

E0 System IC

Systematic error

E1 Moto Protect

Over current protection of the motor

E2 Temp. Sensor

Temperature sensor is not connected

E3 P Temp. Over

The equipment stops due to the over-temperature of the chassis

E4 Time Remain

The Sparkular Grain materials are about to run out

E5 KTemp. Over

The equipment stops due to over-temperature of the mechanism

The Interface of Setting：

Press MENU, you can enter into the interface of setting, and press MENU, you can enter into

different options until return to the main interface.

Option

Scope

Illustration

Set DMX Address

1-512

Set DMX Address

Fountain Height

1-10

Manually adjust the height of Sparkular

•Advanced Interface：

Press MENU for 3 seconds, you can enter into the Advanced Interface. Press MENU, you can enter

into different options, and press MENU for 3 seconds, you can return to the main interface.

Option

Scope

Illustration

LCD Backlight

On/Off

LCD Backlight Open/Off

Fountain Height 1

2-100

Adjust 1 notch consumption of consumable materials *

Fountain Height 2

2-100

Adjust 2 notch consumption of consumable materials*

Fountain Height 3

2-100

Adjust 3 notch consumption of consumable materials*

Fountain Height 4

2-100

Adjust 4 notch consumption of consumable materials*

Fountain Height 5

2-100

Adjust 5 notch consumption of consumable materials*

Fountain Height 6

2-100

Adjust 6 notch consumption of consumable materials *

Fountain Height 7

2-100

Adjust 7 notch consumption of consumable materials*

Fountain Height 8

2-100

Adjust 8 notch consumption of consumable materials*

Fountain Height 9

2-100

Adjust 9 notch consumption of consumable materials*

Fountain Height 10

2-100

Adjust 10 notch consumption of consumable materials*

Mode Selection

Factory Mode/

User Mode

Used for the factory to test the equipment

Default Parameter

The parameters of the equipment can be restored to the

factory settings through pressing Enter

•Each notch can have a density of the Grains that will be feed on that notch 10-100*

DMX Channel Mode

The system occupies only two channels.

Channel Value

Function

0-9

Fountain Off

10-19

Fountain Height 1

20-29

Fountain Height 2

30-39

Fountain Height 4

40-49

Fountain Height 5

50-59

Fountain Height 6

60-69

Fountain Height 7

70-79

Fountain Height 8

80-89

Fountain Height 9

90-99

Fountain Height 9

100-150

Fountain Height 10

Second Channel

Function

220-235

Clear Material

230-235

EMERGENCY STOP

240-245

Pre-heat Off

250-255

Pre-heat On

Host Controller (ZK6200)

•Description of Hardware

•ZK6200 Host Controller is an intelligent system specially designed for the multi-effects and

remote control of Sparkular machine, so as to create the simulation and demonstration of

Pyrotechnic Gerb effects. Diversified port configuration is suitable for control of technical

performances. The audio trigger and timing code trigger can be used to control the

synchronous function of music. LAN ports can be used to extend the communication among

multi host controllers.

Host Controller Part No.: ZK6200

Parameters:

Dimension: 390×300×110mm

Weight: 3.3kg

Input: 110-240Vac, 50/60Hz

Work power: 5w

Work Temp. : -20℃~ 70 ℃

Ports: Two CAN communication ports, USB port, 2 media ports(trigger by

music), 2 MIDI ports(trigger by music), 2 DMX512 output ports, Ethernet

Support max.1000m communication cable

3400mAH battery

Lifetime: > 5 years

•Host Controller Introduction

a) International standard DMX512 signal output

b) Support 18 units sparkular at the same time (standard –18 UNITS Pro Controller - 54 units).

c) Five kinds of standard dynamic modes: Synchronization, Center to Ends, Ends to Center, Left

to right，Right To Left, Special Effects and one kind of user-defined special effect mode,

supports 8 files and each file supports 36000 lines at maximum (special effects last for 30

minutes)

d) There are multiple optional trigger sources. Hand, Music or Midi Inputs.

e) Support simulation function and LED display.

f) Monitoring function. System can pass back operation shows on screen status of sparkular

(temperature, alarm, messages and so on).

g) Emergency stop function.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sparkular DJ-Equipment Handbücher

Sparkular

Sparkular SPARKULAR 2 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung