SpectraLink 84 Series Bedienungsanleitung

USER GUIDE | CLOUD COMMUNICATIONS

Spectralink

Quick Network

Connect (QNC) Guide

Document Version 1.2

February 2019

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

The Spectralink 84-series phone is a wireless device; however, it will not have any wireless conguration by default;

it would not understand what network it is going to be set up with. There is a device called the Spectralink Quick

Network Connect (QNC), where you can congure the Spectralink 84-series wireless setting as described in this

QNC guide. The QNC allows you to congure up to 4 Spectralink 84-series phones at a time. The main purpose of

this QNC guide is to enable the phone to acquire the IP address from the wireless network.

QNC device has a built-in IP address of 192.168.1.1. You need to connect the QNC directly with the PC point to

point. You will need to dene a static IP address in the PC in order to communicate with the QNC. Once connected,

the QNC can be browsed with the address 192.168.1.1.

In the rst screen, we need to select Spectralink 84-series.

There are ve wireless security types congurable on the Spectralink phones. You can choose to use any one of

them. The following are two examples of conguring two of the ve Wireless security types.

Note: Step A must be chosen for each Wireless Security Type and steps B, C, D, and E are common to all.

Wireless Security type congurations:

a. WPA2- Enterprise Wireless Security Type

In the Wi-Fi settings,

• Put the SSID. Below it is shown

as ‘MasergyLab’.

• Choose the security type. Below,

it is WPA2-Enterprise.

• Fast Roaming is ‘OKC’

• WPA2-Enterprise security type is

chosen to PEAP.

• If PEAP is chosen, then we need

to load Root CA certicate of the

authenticating server. We can do

that by choosing ‘Upload Files’.

If we choose some other security

types such as WPA2-PSK, we

need not load any certicate.

NOTE: The certicate le must

be in TEXT format. If you upload

certicate in CER or binary

(*.cer) format, it will let you

upload it; however, when the

certicate is in CER format, the

data from the QNC cannot be

loaded to the phone.

• Then we need to put ‘Username’

and ‘Password’ which can

authenticate with the radius server and the user can log in.

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

b. WPA2-PSK Wireless Security Type

In the Wi-Fi settings,

• Put the SSID. Below it is shown as ‘MasergyLab’.

• Choose the security type. Below, it is WPA2-PSK

• Put the appropriate paraphrase (passcode) for the network SSID.

c. Additional Wi-Fi Setup

Regulatory domain is region based. It is chosen as ‘North America’. Then, we can chose the frequency

level 2.4 GHz or 5.0 GHz.

d. Provisioning Server Setup.

You can dene the provisioning serve in one of the two ways – DHCP or static. If it is DHCP, it will

automatically grab the server. Below, we have shown how you may enter a static server. The server is

‘ftp.broadcore.com’.

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

IMPORTANT:

In some cases, you may need to enter the username and password for the FTP user. The default username and

password for the Spectralink is:

Username:

adminstrator

Password:

admin123

Or, as below by enabling the DHCP, whereby the phones grabs the server using Option 66. We may also dene DNS

or SNTP if required.

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

e. Transferring above data to the phone:

At the end of the QNC conguration, please click on the ‘UPDATE CONFIGURATION’ at the bottom

center of the screen. This saves the conguration with the QNC.

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

Now, the wireless data that QNC has will need to be transferred (downloaded) to the phone. The transfer of data

is done using a USB cable which comes with the QNC device. (You can connect up to 4 phones at a time using the

4 USB ports, provided you have four connecting cables.) In order to download the wireless conguration from the

QNC, the phone must be done in a FACTORY RESET mode. Normally, a brand new phone is already factory reset.

Factory reset procedure (if needed):

• Go to the phone menu:

• Settings ► Advanced Settings ►

• Password: 456 (the default password is 456 unless it was changed by someone).

• Administration Settings ► Reset to Defaults ► Reset to Factory ► Yes

The factory reset phone needs to be connected with the QNC with the USB cable. As you connect the phone with

the QNC, the phone will make a peculiar sound, and starts rebooting. You should see the phone rebooting within

15 seconds. At this point, you will no longer need to keep the phone connected to the QNC. Even if you keep the

phone connected, it will not matter. (Also, when you start factory resetting the phone should not matter while it is

connected to the QNC).

If the phone does not reboot, you may need to manually update conguration as follows:

• Go to the phone menu:

• Settings ► Basic Settings ► Update Conguration

The phone should now start rebooting. If not, there could be some issue.

As the phone reboots, it will take the wireless information, and the phone will get an IP address. To check if the

phone gets the IP address:

• Go to the phone menu:

• Settings ► Status ► Network ► TCP/IP Parameters

There you will see the IP address, subnet mask, and the default gateway per your wireless network conguration.

Again, the main purpose of this QNC guide is to enable the phone to acquire the IP address from the wireless

network.

Manual Conguration of the Wireless Phone (without the QNC)

Except for loading certicate (if necessary), you can congure/edit the phone's wireless settings manually – without

using the QNC – albeit this could be cumbersome for some. In the phone, we can navigate to the following:

Settings ► Advanced Settings ► Administration ► Network Conguration ► Network Interfaces ► Wi-Fi Menu

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

Under the Wi-Fi Menu, you should complete the following congurations:

a. Enabled: Yes

b. DHCP: Enabled

c. SSID: {Put the name of your wireless network SSID}

d. Security: Choose as per customer's conguration: WPA2-PSK, WPA2-Enterprise, etc.

For example:

• If you choose WPA2-PSK above, Click on WPA2-PSK, then, you enter the paraphrase.

• If you choose WPA2-Enterprise, click on WPA2-Enterprise, then data-ll other options as desired.

Here is the example of how you enter passphrase with WPA2-PSK security.

You need to go to the security type under the Wi-Fi menu. In the Wi-Fi menu, the security types are:

• WEP

• WPA2-PSK

• WPA2-Enterprise

Click on the "WPA2-PSK" as above. Then, you can enter the passphrase.

It says:

• PSK Type: Passphrase

• Passphrase: *******

You click on the Passphrase, and you will be able to enter the new passphrase.

e. Radio: Choose either 2.4 Hz or 5.0 Hz and the same MUST be enabled.

Radio ► Regulatory domain: 01 – for North America (SHOULD NOT BE ‘None’)

Troubleshooting the QNC Bug

Some of the QNC versions have been found to contain a corrupt conguration le; thanks to the same, the wireless

settings could not be downloaded from the QNC to the phone.

Spectralink is going to correct this error in the next release. However, this error can be manually corrected by the

following procedure:

1. Verication of the issue:

a. Connect QNC with your PC as usual. Type the following in the browser: http://192.168.1.1/usb/ftp/

You will see the le 00000000.cfg is with 0 byte. This is the issue and it should have 281 bytes.

SPECTRALINK QUICK NETWORK CONNECT (QNC) GUIDE

The procedure below addresses this particular issue.

2. Manual Correction:

a. SSH into the QNC. IP address 192.168.1.1.

b. Put the following login credential:

• login: root

• password: raspberry

c. Delete the above le, then do a shutdown:

• $ rm /media/usb/ftp/00000*.cfg

• $ shutdown now

d. After 5 seconds. Pull the power plug out. After 5 seconds. Plug it back in.

e. Do the same verication step (1) above to verify if the le has 281 bytes.

Andere Handbücher für 84 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SpectraLink Telefon Handbücher

SpectraLink

SpectraLink IP-DECT SERVER 400 Bedienungsanleitung

SpectraLink

SpectraLink NetLink Wireless Telephone Bedienungsanleitung

SpectraLink

SpectraLink NetLink e340 Bedienungsanleitung

SpectraLink

SpectraLink NetLink e340 Bedienungsanleitung

SpectraLink

SpectraLink NetLink PTB500 Service-Handbuch

SpectraLink

SpectraLink SpectraLink 1725-36165-001 Bedienungsanleitung

SpectraLink

SpectraLink NetLink e340 Bedienungsanleitung

SpectraLink

SpectraLink SpectraLink 1725-36143-001 Bedienungsanleitung

SpectraLink

SpectraLink SpectraLink SNP2400 Bedienungsanleitung

SpectraLink

SpectraLink 7532 Bedienungsanleitung

SpectraLink

SpectraLink NetLink e340 Bedienungsanleitung

SpectraLink

SpectraLink 75-Series Betriebsanleitung

SpectraLink

SpectraLink 6020 Bedienungsanleitung

SpectraLink

SpectraLink NetLink e340 Bedienungsanleitung

SpectraLink

SpectraLink 7520 Bedienungsanleitung

SpectraLink

SpectraLink NetLink i640 Bedienungsanleitung

SpectraLink

SpectraLink RingCentral Office 84 Series Bedienungsanleitung

SpectraLink

SpectraLink NetLink PTB810 Service-Handbuch

SpectraLink

SpectraLink LINK 6020 Bedienungsanleitung

SpectraLink

SpectraLink 410 Bedienungsanleitung

SpectraLink

SpectraLink NetLink e340 Bedienungsanleitung

SpectraLink

SpectraLink LINK 6020 Service-Handbuch

SpectraLink

SpectraLink NetLink 8020 Bedienungsanleitung

SpectraLink

SpectraLink SL8440 Kurzanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung