r
Overview
LVP8000 is a powerful four-channel splicing processor, which can support four
independent video processors, 4×4 channel hybrid matrix and 4096×2304 high-resolution
picture output. For a single processor, it can splice a maximum of 10240 × 960 or 4096 ×
2304 or 1920 × 4800 picture output, which is much higher than 8M video output. It is the
ideal video demonstration equipment, which can be applied to large-scale performance,
command, control center, video conference, medical facility, meeting room and court.
LVP-8000 can accommodate a wide range of input source, with four-channel
independent picture processing engine and four-channel fully configurable input, which
can switch in sixteen-channel video input, including four-channel DVI, four-channel VGA,
four-channel VID and four-channel 3G-SDI (optional). Every channel can receive standard
resolution or high-resolution video signal, with the maximum resolution input reception of
1920 x 1200 @ 60Hz.
LVP-8000 can output four-channel video with rich interfaces. The output applies DVI-I
and DVI-D interface, which can realize two-channel DVI and one-channel VGA (using
DVI to VGA connector to connect the DVI-I interface) and meet more device attachment.
The output resolution of each channel can be set by the user, with the maximum output of
1920 x 1200 @ 60Hz or 2048 x 1152 @ 60Hz resolution, which can meet various
high-definition performances. LVP-8000 can achieve different kinds of splice modes, such
as, equal splice, unequal splice, super wide and super high splice, simplifying user’s
installation.
Four-channel independent picture processor is internally installed in LVP-8000 with
powerful video processing and switching function, which can achieve single-input to
multiple-output or multiple-input to multiple-output video switch, equal to a 4 × 4 channel
hybrid matrix. LVP-8000 can be configured into four independent video processors to
reduce the use of a large number of video processors and improve the performance quality.
