Pa 1 - OverView
1/11
Specications
Product Name
Oveiew
FC
ESC
SpeedyBee F745 35A BLS AIO
Power Input
Mounting
Dimension
Weight
MCU
IMU(Gyro)
USB Connection
Barometer
OSD
Flash FC Firmware Wirelessly
Download/Analyze Blackbox
DJI Air Unit 6-pin Connector
Flash(for BlackBox)
Current Sensor
BetaFlight Camera Control Pad
5V Output
9V Output
ESC Signal Pads
UART
ESC Telemet UART
I2C
LED Pad
Buzzer
BOOT Button
RSSI Input
SmaPo
Suppoed Flight Controller
Power Input
Continuous Current
Burst Current
ESC Protocol
Power Output
Current Sensor
Firmware
3S - 6S Lipo
25.5 x 25.5mm, 3mm hole diameter
36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above
10.1g
STM32F745
MPU6000
Need to solder a USB TYPE-C module to D+,D-,GND pads.
BMP280
Suppoed
Suppoed
Suppoed
Built-in.
8MB
Suppoed. Scale=256
Yes(CC pad)
4 groups of 5V output. The total current load is 2.5A.
None
M1 - M4
Full UART * 4(UART1, UART2, UART3,UART4)
None
Suppoed.
Used for WS2812 LED
BZ+ and BZ- pad used for 5V Buzzer
Used to enter DFU mode
Not suppoed
Not suppoed
BetaFlight(Default)
3-6S LiPo
35A * 4
45A(5S)
DSHOT300/600
VBAT
Suppoed(Sacle=256)
BLHeli_S J-H-40
SPEEDYBEE F745AIO
Firmware
Firmware Target Name
BLE Bluetooth Suppoed. Used for parameter conguration
built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip
