Spektrum DX Series Bedienungsanleitung

Spektrum DXs Transmitter

Stick Mode Change Guide

You can change transmitter modes among Modes 1, 2, 3 and 4. This conversion requires both a

programming and a mechanical change

Please note that your DXs transmitter may need an update to perform this function. Make sure that it

is on version 1.29 or higher

Update Instructions

***Required Equipment***

- Windows based PC or Laptop with USB Port

- Spektrum USB Programmer (SPMA3065)

- SPMA3068 Adapter (not included with models that came equipped with DXs)

1. Download the Spektrum PC programmer Application and Install –Link here

2. Plug in Spektrum USB programmer cable into open USB Port

3. Open Spektrum PC Programmer Application on your PC

4. In the Top left corner of the App there is a Login button, use this to login to your

Spektrum Account or to create a new account

5. Plug the servo lead end of the USB programmer into the adapter and then plug

adapter into port on your DXs and power on

6. At this time, you should be presented with the Software Update Screen Menu

a. Here you are presented with the Serial Number and you can register the device to

your account by clicking Check for Update

7. Click Check for Update and choose the most recent update at the top of the list

a. Click Update and the transmitter will update. Please wait until the process

is complete before powering down and unplugging cables

Need help? Go to these links for a hands-on video walkthrough to

update transmitters via USB Cable –Click here

Spektrum DXs Transmitter

Stick Mode Change Guide

Stick Mode Change Instructions via Trim Programming

1. To enter trim programming mode, push and hold the Aileron and Rudder trim buttons outward

while you power ON the DXS transmitter.

2. 1 of the 4 Battery level indicator LEDs will light up Green. This indicates the current Stick Mode

selected

The LED will glow BLUE

when in Mode Change

programming mode

Press the A button to

save your selection. The

transmitter will power

down automatically

Mode 1

Mode 2 (default)

Mode 3

Mode 4

Use the Right Up

Trimmer to select your

desired Stick mode

Spektrum DXs Transmitter

Stick Mode Change Guide

Mechanical Conversion

Mechanical conversion is required to change between Modes 1 and 2 or between Modes 3 and 4.

The mechanical conversion consists of the following steps:

1. Change the Throttle Ratchet

2. Adjust the Elevator Centering Screw

CAUTION: Always power off the transmitter, disconnect and remove the battery before adjusting

stick tension or friction straps. Not doing so could result in property damage or injury

Changing the Throttle Ratchet

1. Disconnect the battery holder or optional battery

from the transmitter and set aside.

2. Remove the six Phillips head screws that secure the

rear transmitter case half.

3. Put the transmitter face down on a piece of foam or

a towel and remove the rear case.

CAUTION: Use care to not pull or disconnect any of

the wires attached to the back transmitter half.

4. Locate the silver throttle friction straps on both

gimbals. One strap engages a serrated section on the

gimbal for a ratcheted throttle, while the other strap

engages the smooth section on the gimbal.

5. To change the throttle ratchet, loosen the throttle strap so it does not touch the throttle gimbal.

Tighten the opposite throttle strap to engage the desired throttle ratchet.

Adjusting the Elevator Centering Screw

When changing between Modes 1 and 2, or between Modes 3 and 4, you must adjust the elevator

centering screw.

1. Hold the Elevator or Throttle stick in the full up or

full down position when you are adjusting the elevator

centering screw. Holding the gimbal stick reduces the

load on the elevator centering mechanism and makes

it easier to adjust the centering screw.

2. Locate the gimbal where the elevator centering

spring is engaged. Use a Phillips screwdriver to tighten

the elevator centering screw. Tightening the screw will

disengage the centering spring.

3. Using a Phillips screwdriver, loosen the opposite

elevator centering screw until the lever engages.

Inhaltsverzeichnis

Andere Spektrum Fernbedienung Handbücher

Spektrum

Spektrum DX2S Bedienungsanleitung

Spektrum

Spektrum DX3S Bedienungsanleitung

Spektrum

Spektrum AR8010T Bedienungsanleitung

Spektrum

Spektrum DX3C Bedienungsanleitung

Spektrum

Spektrum DX9 Bedienungsanleitung

Spektrum

Spektrum DX8 Handbuch

Spektrum

Spektrum DSM DX5C Bedienungsanleitung

Spektrum

Spektrum DSM Bedienungsanleitung

Spektrum

Spektrum DX3E Bedienungsanleitung

Spektrum

Spektrum DX9 Bedienungsanleitung

Spektrum

Spektrum DX4C Bedienungsanleitung

Spektrum

Spektrum DX3R Bedienungsanleitung

Spektrum

Spektrum SLT3 3CH Bedienungsanleitung

Spektrum

Spektrum DX3C Konfigurationshandbuch

Spektrum

Spektrum DX3 Bedienungsanleitung

Spektrum

Spektrum DX6 Bedienungsanleitung

Spektrum

Spektrum DX3R Bedienungsanleitung

Spektrum

Spektrum DX2E ACTIVE Bedienungsanleitung

Spektrum

Spektrum SPM4200W Bedienungsanleitung

Spektrum

Spektrum DX4S Bedienungsanleitung

Spektrum

Spektrum dx18qq Bedienungsanleitung

Spektrum

Spektrum PowerSafe AR9130T Bedienungsanleitung

Spektrum

Spektrum DX8 Bedienungsanleitung

Spektrum

Spektrum DX8 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung