SPEX SLWZ-DIM-01 Bedienungsanleitung

MODEL: SLWZ-DIM-01

Wi-Fi Smart Control with

Dimmer User Manual

ENGLISH

Limited 3-Year Warranty

For complete warranty information, including details on consumer legal rights as well

as warranty exclusions, visit www.liteline.com/warranty.

Wireless Frequency: 2.4GHz, 802.11b/g

Input: 120VAC, 60Hz

Output Power (120VAC): LED/Fluorescent: 150W Max

Incandescent: 400W Max

Output Current: 3.3A

Standby Power: 0.5W

Enclosure Type: Type 1 Enclosure (after installation)

Action type: Type 1.Y action

Speciﬁcations

Product overview

Brightness

Indicator

Lights

Power/Connectivity Indicator Light

ON/OFF

Switch

Touch

Dimming

Area

IMPORTANT: Review this installation guide in its entirety before starting installation of

your Smart Dimmer Switch or removal of your old switches. Installation and maintenance

involving electrical wiring must be done by qualiﬁed person(s). Risk of Electric Shock:

Electricity can cause personal injury and property damage if handled improperly.An

external air gap switch shall be installed before circuit connection to this device. The

metal heatsink plate is not grounding, which might become live. Install with plastic Cover

Plate only.

Caution: To reduce the risk of injury and/or overheating and damage to other equipment:

• Make sure that the power at the circuit breaker is turned OFF before starting.

• A neutral (typically white) wire is required.

• Replace single pole switches ONLY. Not compatible with 3-way switches.

• The wire colors indicated in this manual are typically found and may differ in some

constructions / regions.

• Ensure the wire conductors are securely fastened to each wire.

• It is recommended that a certiﬁed electrician completes all high voltage electrical

installations.

• Must follow all building and electrical codes in the region when installing.

• Do not install to control an appliance, motor or receptacle.

• Recommended to be installed in a minimum 2.5" depth device box.

• Do not mix different load types or different luminaires on the same dimmer.

• Dimmer does not work with smart bulbs or ﬁxtures.

• Intended for installation in an in-wall electrical box.

NOTE: INSTALLATION OF THIS SMART DIMMER REQUIRES

A NEUTRAL WIRE. IF NEUTRAL WIRE IS NOT CONNECTED,

THIS DIMMER WILL NOT WORK. CONSULT A QUALIFIED

ELECTRICIAN.

Before you start

1. Turn OFF the power at the

circuit breaker and conﬁrm

with the voltage tester at the

switch before proceeding.

Place voltage tester against the

existing switch checking the

wall plate, screws and switch

at various points to determine

that there is no power present.

What you need

Installation

Screwdrivers Pliers Wire Stripper Voltage Tester

2. Remove the wall plate and pull

out the existing light switch

so that all wires are exposed

outside of the gang box (do not

disconnect wires).

3. Label the live wire with a piece

of electrical tape.

Piece of

electrical tape

Different color screw

(Black or Copper)

OFF

1. Disconnect and remove the

existing switch.

2. Connect the Smart Dimmer as

per the below wiring diagram.

The ground wires must be

connected to the electrical box.

3. Mount the Smart Dimmer in the existing gang box with the

provided screws and attach the wall plate (press ﬁt).

Neutral

(Required)

Live (Required)

Load

Ground

4. Turn on the power at the circuit breaker.

5. Test to see that the Smart Dimmer is functioning by pressing

the ON/OFF switch. Your load (lights) should turn ON/OFF

respectively.

Note: If your lights do not turn on, your live and load wires

might be incorrectly connected. Turn off power at the circuit

breaker and try swapping them.

6. WiZ app setup

Refer to “WiZ Quick Setup Guide”

OFF

INDICATOR LIGHTS STATUS

ON/OFF SWITCH FUNCTION

Dimmer functions

LIGHTS INDICATOR LIGHT

STATUS

COLOR STATUS

Power /

Connectivity

Indicator

Light

WHITE

Powered OFF

OFF Powered ON

Single Blink Ready for Smart Pairing mode

Double Blink Ready for Manual Pairing mode

Flashing Quickly RED Pairing failed

Brightness

Indicator

Lights

7 LEDs Flashing,

Power/Wi-Fi Indicator

Light is OFF

WHITE

Operating temperature is too high;

switch has been turned off

 0%~14% Brightness Level

 14%~28% Brightness Level

 28%~42% Brightness Level

 42%~56% Brightness Level

 56%~70% Brightness Level

 70%~84% Brightness Level

 84%~100% Brightness Level

ACTION COLOR STATUS

Short Press OFF Dimmer is ON

Short Press White Dimmer is OFF

Long Press (5 seconds) White LED Double

Blink Connectivity Mode: Wi-Fi network is

acquired

Troubleshooting

PROBLEM CAUSE SOLUTION

Unable to ﬁnd the

Smart Dimmer on

the network

Smart Dimmer

may not be in

Connectivity Mode

Long Press the ON/OFF switch (5 seconds)

to enter into Connectivity Mode: Searching

for Wi-Fi Network.

Unable to operate

the load (light) with

the ON/OFF switch

Wiring issue Review and conﬁrm the INSTALLATION

section in this manual.

No electricity Check that the power is ON at the circuit

breaker.

Load does not

function or is

incompatible

• Replace the load.

• Check the SPECIFICATION section for

compatible loads and limitations.

Smart Dimmer not

responding to WiZ

APP control

Network is not

connected Check wireless network connectivity.

Permissions are not

granted on mobile

device

Check to see that permissions are granted

for the WiZ APP.

Smart Dimmer is not

functioning correctly Manually press the ON/OFF switch to see

electrical functionality is working.

Load (light) not

functioning properly

Load (light) may not

be compatible or

exceeding limits

• Check SPECIFICATION section to ensure

load (light) is within limits.

• Replace the load (light).

Smart Dimmer not

connecting to the

WiZ APP

Wi-Fi password is

incorrect Re-enter Wi-Fi password.

Weak/low Wi-Fi

signal Check Wi-Fi signal to ensure within range

of router.

Wi-Fi not connected Conﬁrm Wi-Fi router is broadcasting a

2.4GHz signal. Re-connect.

WiZ Quick Setup Guide

Downloading the WiZ App

Before you start, make sure you install the WiZ App from either Google Play or the

Apple App Store (both offer the same set of features). The app can also scale to ﬁt

tablets as needed.

Note: Upon ﬁrst boot-up, the ﬁrmware may need to be updated. Please allow up to 1

minute for the Smart Dimmer to update after completing WiZ app setup.

Create a home or join an

existing one

Name your home Tap the ‘Add room’ button

to add a room

QR CODE

Direct to

Apple app store / Google play store

For additional support, visit www.liteline.com/WiZsupport

Installing and pairing smart dimmer

The dimmer switch is connected through the app and will only operate on your home’s

2.4GHz Wi-Fi network. Most new routers are dual-bandwidth (both 2.4GHz and

5GHz), ensure you select the 2.4GHz network which covers a wider range than the

5GHz. To make sure your phone is on the 2.4GHz network, either select it in the list of

available networks on your phone or go into the router settings and temporarily de-

activate the 5GHz network (you can activate it again after pairing is done).

If this is not possible and the dimmer switch is not found, try putting the dimmer

switch in pairing mode by holding the ON/OFF button for 5 seconds (or until the

indicator lights ﬂashes red), then walking a short distance away from the router. Due

to the short range of 5GHz networks, your phone should auto-connect to the 2.4GHz

at this point. Once connected, you can start pairing in the app. You can pair as many

devices as you want at the same time.

Name your own or select

from the list of standard

rooms

Press the ‘Add a device’

button and enter your

Wi-Fi password

Select the ‘Wi-Fi Switch’

and continue with prompts

to connect your device

Manuel de l’utilisateur – Contrôle

intelligent Wi-Fi avec Gradateur

FRENCH

Garantie limitée de 3 ans

Pour connaître le texte complet de la garantie, notamment les renseignements sur les

droits des consommateurs ainsi que les exclusions au titre de la garantie, consultez

www.liteline.com/warranty.

Inhaltsverzeichnis

Sprachen:

Andere SPEX Controller Handbücher

SPEX

SPEX SLWZ-SNC-01 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung