USING YOUR SPIN SPA:
1. Align and attach the desired
attachment to the Spin Spa
Head (See illustration #6).
2. To change attachments, pull
outwards (See illustration #7).
3. Apply soap to the brush
attachment.
4. Press on/o button, to activate
Spin Spa (See illustration #8).
5. Adjust speed by pressing
the hi/low button (see
illustration #9).
CLEANING YOUR SPIN SPA:
1. Rinse soap from attachments with warm water after every use, allow
attachments to dry completely before reattaching to the handle.
2. Wipe Spin Spa with a damp cloth.
INSTALLING/CHANGING
THE BATTERIES:
Spin Spa requires three (3) AA Batteries
1. Push button A, then slide Battery
door o to install batteries (see
Illustrations #3 & #4)
2. Insert 3 new AA batteries.
• Do not get water into battery
compartment.
• Do not open compartment while
showering.
• Be sure that you and appliance are
completely dry before opening the
battery door.
3. Slide the battery door back on,
ensuring it slides under rails (B).
ATTACHMENTS/FEATURES:
B. Microdermabrasion
Attachment
D. Cleansing
Attachment
C. Massage
Attachment
A. Pumice Stone E. Mesh Sponge
A. Pumice Stone: Smooths rough and calloused skin. Use with light
pressure. Limit use to 3-4 seconds at a time
B. Microdermabrasion Attachment: Exfoliates skin and can be lled with
your favorite liquid soap (see below instructions)
C. Massage Attachment: Gentle cleaning and soothes aches and pains
D. Cleansing Attachment: Gentle Cleaning
E. Mesh Sponge: Gentle Exfoliation
Illustration #6
Illustration #3
Illustration #5
Illustration #4
Illustration #7
Illustration #8 Illustration #9
1. Ensure unit is turned o.
2. Remove the attachment by pulling away from
the handle.
3. Pull the plug out on the side of the head
(see Illustration #1).
4. Pour in a small amount of your favorite
liquid soap (see Illustration #2).
5. Secure the plug and reattach the attachment
to the unit’s head.
Illustration #1
Illustration #2
hi/low on/off hi/low on/off
NOTE: To Fill The Microdermabrasion
Attachment With Soap
