Spinner BN A77150 Bedienungsanleitung

Data subject to change without notice –16.06.2021(A)

SPINNER GmbH │ Erzgiessereistr. 33 │ 80335 München │ Germany │ www.spinner-group.com │ info@spinner-group.com

Installation guide for antenna

BN A77150

1 Introduction and safety advice

This instruction shall provide information how to install the antenna with mounting kits.

All shown tasks are intended to be carried out by qualified personnel only. Safety rules apply (e.g.

for working with heavy loads, radio frequency power signals or tools). In order to prevent damage

to equipment and humans, make sure that no RF power is present at the combiner during

installation.

Please note that satisfactory performance of the system (especially in terms of intermodulation)

can only be achieved if all jumper cables and connectors are handled properly. Please make sure

that all connectors are clean and free from metal dust or dirt. Avoid sharp bending of the

connecting jumper cables.

After carrying out all described steps, the antenna is ready for use. Make sure that the specified

environmental conditions for operation are not exceeded.

SPINNER does not guarantee for any faults or damage resulting from improper installation.

Freigegeben

Released

SPIClass

RESTRICTED

Schutzvermerk ISO 16016 beachten.

Refer to protection notice ISO 16016.

Data subject to change without notice –16.06.2021(A)

SPINNER GmbH │ Erzgiessereistr. 33 │ 80335 München │ Germany │ www.spinner-group.com │ info@spinner-group.com

2 Installation

2.1 Install the antenna

Secure the antenna on the pole with the mounting plate and mast bracket using the M5

nuts.

Dimensions of Mast Bracket:

Ø50+2

-5

16±2

6,4

9,5

24±2

78±2

59,5±2

12±2

Freigegeben

Released

SPIClass

RESTRICTED

Schutzvermerk ISO 16016 beachten.

Refer to protection notice ISO 16016.

Data subject to change without notice –16.06.2021(A)

SPINNER GmbH │ Erzgiessereistr. 33 │ 80335 München │ Germany │ www.spinner-group.com │ info@spinner-group.com

2.2 Install the antenna upside down

Step 1: Please prepare the materials and tools.

350

Freigegeben

Released

SPIClass

RESTRICTED

Schutzvermerk ISO 16016 beachten.

Refer to protection notice ISO 16016.

Data subject to change without notice –16.06.2021(A)

SPINNER GmbH │ Erzgiessereistr. 33 │ 80335 München │ Germany │ www.spinner-group.com │ info@spinner-group.com

Step 2: Secure the antenna on the pole using the U type bolt and mast bracket.

Step 3: Complete the installation by tightening the M5 nuts.

Freigegeben

Released

SPIClass

RESTRICTED

Schutzvermerk ISO 16016 beachten.

Refer to protection notice ISO 16016.

Andere Spinner Antenne Handbücher

Spinner

Spinner A77137 Bedienungsanleitung

Spinner

Spinner 666001 Bedienungsanleitung

Spinner

Spinner BN 666000 Bedienungsanleitung

Spinner

Spinner SISO 1-port-V-Pol Bedienungsanleitung

Spinner

Spinner A77136C0001 Bedienungsanleitung

Spinner

Spinner A77697 Bedienungsanleitung

Spinner

Spinner A77136 Bedienungsanleitung

Spinner

Spinner A77137 Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

Proxim

Proxim 5054-PA-23 Bedienungsanleitung