Spirit CRS800 Bedienungsanleitung
CRS800 Semi-Recumbent Stepper
OWNER’S MANUAL
2
TABLE OF CONTENTS
4 IMPORTANT SAFETY INSTRUCTIONS
5 IMPORTANT ELECTRICAL INSTRUCTIONS
7 IMPORTANT OPERATION INSTRUCTIONS
7 PRODUCT REGISTRATION
8 CRS800 ASSEMBLY INSTRUCTIONS
14 CONSOLE OPERATION
20 PROGRAMMABLE FEATURES
30 USING HEART RATE TRANSMITTER
33 GENERAL MAINTENANCE
34 MANUFACTURER’S LIMITED WARRANTY
Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any
customizing, adjustments, repair or maintenance that is not described in this manual.
3
Congratulations on your new Semi-Recumbent Stepper and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality Semi-Recumbent Stepper from Spirit Fitness.Your new Semi-Recumbent Stepper
was manufactured by one of the leading tness manufacturers in the world and is backed by one of the most comprehensive
warranties available. Through your dealer, Spirit Fitness will do all we can to make your ownership experience as pleasant
as possible for many years to come. If not purchased direct from Spirit Fitness, the local dealership where you purchased
this Semi-Recumbent Stepper is your administrator for all Spirit Fitness warranty and service needs. Their responsibility is to
provide you with the technical knowledge and service personnel to make your experience more informed and any difculties
easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below
to make any future, needed contact easy. We appreciate your support and we will always remember that you are the reason
that we are in business.
Yours in Health,
Spirit Fitness
NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________
4
Important Saftey Instructions
WARNING
When using an electrical appliance, basic precautions should
always be followed, including the following:
Read all instructions before using this appliance.
DANGER -To reduce the risk of electric shock:
Always unplug this applicance from the electrical outlet
immediately after using and before cleaning.
WARNING - To reduce the risk of burns, re, electric shock, or injury
to persons, install the Stepper on a at level surface with access to a 110-
volt, 15-amp grounded outlet with only the Stepper plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR
BETTER,WITH ONLY ONE OUTLET ON THE END:
• Do not operate Stepper on deeply padded, plush or
shag carpet. Damage to both carpet and Stepper
may result.
• Keep children away from the Stepper.There are
obvious pinch points and other caution areas that can
cause harm.
• Keep hands away from all moving parts.
• Never operate the Stepper if it has a damaged cord
or plug. If the Stepper is not working properly, call your
dealer.
• Keep the cord away from heated surfaces.
• Do not operate where aerosol spray products are
being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous
environment.
• Never drop or insert any object into any openings.
• Do not use outdoors.
• To disconnect, turn all controls to the off position, then
remove the plug from the outlet.
• Do not attempt to use your Stepper for any purpose
other than for the purpose it is intended.
• The hand pulse sensors are not medical devices.
Their purpose is to provide you with an approximate
measurement in relation to your target heart rate. Use
of a chest transmitter strap (sold separately) is a much
more accurate method of heart rate analysis.Various
factors, including the user’s movement, may affect the
accuracy of heart rate readings.The pulse sensors are
intended only as exercise aids in determining heart rate
trends in general.
• Wear proper shoes. High heels, dress shoes, sandals
or bare feet are not suitable for use on your Stepper.
Quality athletic shoes are recommended to avoid
leg fatigue.
• This appliance is not intended for use by persons with
reduced physical, sensory or metal capabilities, or lack
of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Keep children under the age of 13 away from this
machine.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
5
Important Electrical Instructions
WARNING
NEVER remove any cover without rst disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance
of your Stepper may be affected. Such conditions are not covered
under your warranty. If you suspect the voltage is low, contact your
local power company or a licensed electrician for proper testing.
NEVER expose this Stepper to rain or moisture.This product
is NOT designed for use outdoors, near a pool or spa, or in any
other high humidity environment. The operating temperature
specication is 40 to 120 degrees Fahrenheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not
rated for high inrush currents that can occur when a Stepper
is rst turned on or even during use. If your Stepper is tripping
the house circuit breaker (even though it is the proper current
rating) but the circuit breaker on the Stepper itself does not trip,
you will need to replace the home breaker with a high inrush
type.This is not a warranty defect. This is a condition we as a
manufacture have no ability to control. This part is available through
most electrical supply stores. Examples: Grainger part # 1D237, or
available online at www.squared.com part #QO120HM.The electrical
outlet used should have a dedicated 15 amp circuit breaker.
Grounding Instructions
This product must be grounded. If the Stepper should
malfunction or breakdown, grounding provides a path of least
resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-
grounding plug.The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if you are
in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product if it will
not t the outlet; have a proper outlet installed by a qualied
electrician.
6
This product is for use on a nominal 110-volt/15 amp
dedicated circuit, and has a grounding plug that looks like the
plug illustrated below.A temporary adapter that looks like
the adapter illustrated below may be used to connect this
plug to a 2-pole receptacle as shown below if a properly
grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet,
(shown below) can be installed by a qualied electrician. The
green colored rigid ear-lug, or the like, extending from the
adapter, must be connected to a permanent ground such
as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal screw.
7
Important Operation Instructions
• NEVER operate this Semi-Recumbent Stepper without reading and completely understanding the results of any
operational change you request from the computer.
• Understand that changes in resistance do not occur immediately. Set your desired resistance level on the computer
console and release the adjustment key. The computer will obey the command gradually.
• Use caution while participating in other activities while pedaling on your Semi-Recumbent Stepper; such as watching
television, reading, etc. These distractions may cause you to lose balance which may result in serious injury.
• Do not use excessive pressure on console control keys. They are precision set to function properly with little nger
pressure.
Record Your Serial Number
Please record the serial number of this tness product in the space provided
below.
Serial Number:
Register Your Purchase
The self-addressed product registration card must be completed in full and returned to Spirit Fitness.
You can also go to https://www.spirittness.com/residentialwarrantyregistration.html under the Support
tab to register online.
Serial Number Location *
*located under console mast cover
8
CRS800 PRE ASSEMBLY
UNPACKING
1. Cut the straps, then lift the box over the unit and unpack.
2. Carefully remove all parts from the carton and inspect for any damage or missing parts.
If parts are damaged or missing, contact your dealer immediately.
3. Locate the hardware package. Remove the tools rst. Remove the hardware for each
step as needed to avoid confusion. The numbers in the instructions that are in paren-
thesis (#) are the item number from the assembly drawing for reference.
TOOLS INCLUDED:
13/14mm Wrench
12/14mm Wrench
Phillips Screwdriver
Short Phillips Screwdriver
5mm L Allen Wrench
PARTS INCLUDED:
1 Main Frame
1 Console Mast
1 Console Mast Cover
2 Swing Arms
2 Connecting Arms
6 Levelers
1 Console
2 Foot Pedals
1 Power Cord
1 Audio Cable
2 Transport Wheels
1 Hardware Kit
9
SPEAKERS
CONSOLE
CONSOLE MAST
CONNECTING ARM
FRONT STABILIZER
LEVELERS
WATER BOTTLE
HOLDER
REAR STABILIIZER
MAIN FRAME
CONSOLE FAN
SWING ARM
10
CRS800 STEP ONE
computer
cable
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
115 PHILLIPS HEAD SCREW M5X12 12
121 NYLOC NUT 5/16”X6T 1
130 FLAT WASHER 5/16”X1.5T 3
155 HEX HEAD BOLT 3/8”X4” 2
156 HEX HEAD BOLT 5/16”X1-1/4” 1
158 NYLOC NUT 3/8”X7T 2
164 PHILLIPS HEAD SCREW M6X15 4
1. Gather HARDWARE FOR STEP 1.
2. Secure the PEDALS with PHILLIPS HEAD
SCREWS (115)
3. Put the SEAT CUSHION on the SEAT CAR-
RIAGE and use PHILLIPS HEAD SCREWS
(164) to secure.
4. Insert the SEAT BACK in the SEAT CARRIAGE
and secure with HEX HEAD BOLTS (155) and
NYLOC NUTS (158). Use the HEX HEAD
BOLT (156) with FLAT WASHERS (130) and a
NYLOC NUT (121) to secure.
Andere Handbücher für CRS800
1
Inhaltsverzeichnis
Andere Spirit Schrittmaschine Handbücher
Spirit
Spirit CS800 Bedienungsanleitung
Spirit
Spirit MS300 Bedienungsanleitung
Spirit
Spirit XS895 Bedienungsanleitung
Spirit
Spirit CRS800S Bedienungsanleitung
Spirit
Spirit CS800 Bedienungsanleitung
Spirit
Spirit CRS800S Bedienungsanleitung
Spirit
Spirit CRS800S Bedienungsanleitung
Spirit
Spirit CS800 Bedienungsanleitung
