Split-fire 2000 Series Bedienungsanleitung
1
Thank You for Purchasing a Split-fire Log
Splitter!
We appreciate having you as our customer and wish
you many years of safe and satisfactory operation
with your machine.
SPLIT-FIRE SALES INC.
285633 Airport Road
Norwich, ON N0J 1P0
Canada
1-877-548-3473 / 519-468-3647
Please share a google review about your
Split-Fire experience
Table of Contents
1. Introduction 4
1.1 How to use your Owner’s Manual 4
1.2 Product Identification 6
1.3 Warranty 7
2. Safety 8
2.1 Safety Labels 8
2.2 Wood Handling Safety 10
2.3 Operation Safety 11
2.4 Worksite Safety 14
2.5 Option Safety / Operation 16
2.51 Log Lifter 16
3. Operating Instructions 18
3.1 Before Operation & 3 Point Hookup 18
3.2 Operation 20
3.3 After Operation & 3-Point Hookup 21
4. Maintenance 22
4.2 Log Splitter Maintenance 22
4.21 Frame 22
4.22 Valve 26
5. Storing you Splitter 24
7. Parts Breakdown 25
8. Manual Checklist 27
2000, 3000 & 4000 Series 3-Point
Introduction Owners Manual
4
1.1 How to use your Owner’s Manual
This owner’s manual is a very important part of your new machine
and should remain a permanent part of it. If the machine is sold, the
operator’s manual must go with it.
By reading the operator’s manual you will help yourself and others
avoid unnecessary personal injury and/or damage to the machine
and will also allow you to perform maintenance to keep your machine
operating properly. The information recorded in this manual will help
you use this machine safely and effectively. Once you know how to
operate the machine correctly and safely, you can train others to
operate the machine as well.
If your machine has been ordered with any options or attachments,
please refer to the option safety section of the individual operator’s
manual that is included with that specific accessory.
The machine that is used in this manual for illustration may differ
slightly from your model. It will be similar enough to help you
understand our instructions.
Throughout this manual the terms “Left Hand” and “Right Hand” will
be used. These sides are determined when standing behind the
engine and facing the knife or far stop of the machine. Also “Back”
and “Front” will be used. On the self-contained log splitter, the “Back”
is referred to the engine side and the hitch is the “Front”. The
hydraulic pump would be located on the back-left corner of the
machine.
Your machine has been tested and inspected to pass quality control
at Split-fire’s Manufacturing facility to ensure good performance prior
to leaving the factory.
2000, 3000 & 4000 Series 3-Point
Owners Manual Introduction
5
While reading the manual, important messages are used to bring the
operator’s attention where there may be safety concerns relating to
machine damage and important servicing information. Please read
all these messages to avoid personal injury and machine damage.
The three main messages will start with:
WARNING!!!: which suggests, a strong chance of personal
injury or death to the operator or bystanders if procedures are
ignored.
IMPORTANT: which suggests, a strong chance of potential
damage to the machine may occur if procedures are ignored.
NOTE: suggests to the operator, General information given to
help the operator to operate or service the machine.
2000, 3000 & 4000 Series 3-Point
Introduction Owners Manual
6
1.2 Product Identification
If you ever need to contact your dealer or the manufacturer for parts
or questions regarding the operation or servicing of the machine, it is
important to have the model number as well as all the necessary
identification numbers. Using the sample pictures on page 7 you can
find the necessary numbers to complete the spaces below.
Date of Purchase:
______________________
Dealer Name:
___________________________________________
Dealer Phone Number:
______________________
Frame Serial Number: ( XX XX XX )
______________________
Frame Serial Number
2000, 3000 & 4000 Series 3-Point
Owners Manual Introduction
7
1.3 Warranty
Split-Fire Sales Inc. guarantees the original purchaser of any new
Split-Fire machine, that the same is free of defects in workmanship or
materials that may cause performance failure, subject to the
condition’s hereafter.
Split-fire must be contacted before the problem on the machine has
been fixed. Split-fire will diagnose the problem and authorize any
warranty work that will be allowed. If Split-fire does not authorize or
parts are not sent from Split-Fire, warranty will not be applicable.
This guarantee is limited to a period of one year from the date of
purchase. Replacement of any defective part is free of charge FOB
Split-Fire Sales Inc. If Split-Fire requires the parts to be returned to
Split-Fire, Split-Fire will pay for return shipping.
This guarantee does not apply to engines or other parts that are
manufactured and guaranteed by the manufacturer thereof, nor does
this apply with respect to any part or product that:
1. has original parts removed or otherwise altered without
specific authorization beforehand from Split-Fire Sales Inc.
2. has had placed upon or attached to it, any part or product not
sold or approved by Split-Fire Sales Inc.
3. has been damaged or is not used in conformity with the
applicable instruction for the machine.
4. has not been properly adjusted or maintained by the owner.
5. has been adjusted or altered to increase the performance of
the machine.
This guarantee is in lieu of, and excluded all other guarantees and
conditions of merchantability and fitness for a purpose. Acceptance
of a Split-Fire Sales product constitutes an agreement that Split-fire
Sales shall have no liability for any special or consequential damage.
2000, 3000 & 4000 Series 3-Point
Safety Owners Manual
8
2.1 Safety Labels
The machine safety labels shown in the section below are very
important. They are placed in areas on the machine that draw the
attention of the operator to potential safety hazards on the machine.
If at any time the stickers are removed, or come off, contact your
dealer or the manufacturer immediately for replacement decals.
The operator’s manual explains the potential safety hazards in detail
associated to each decal. Special attention should be kept for these
recommendations. They are outlined for your safety.
2000, 3000 & 4000 Series 3-Point
Owners Manual Safety
9
2000, 3000 & 4000 Series 3-Point
Safety Owners Manual
10
2.2 Wood Handling Safety
WARNING!!! - NEVER HANDLE WOOD ON THE SAWN ENDS;
BLOCKS SHOULD ALWAYS BE HELD BY THE BARK SIDES!
HANDLING BLOCKS ON THE SAWN END INCREASES RISK FOR
PERSONNEL INJURY
WARNING!!! - NEVER LIFT HEAVY/OVERSIZE LOGS BY
YOURSELF. BAD POSTURE AND HEAVY LOGS MAY CAUSE
SEROIUS INJURY. IF THE LOG IS TOO HEAVY GET ASSISTANCE
OR UTILIZE A HYDRAULIC LOG LIFTER.
It is important to always wear proper PPE when operating your log
splitter.
Gloves – Gloves must be worn at all times to reduce the risk of
slivers, embedded objects (Nails, Wire, etc) and contact with natural
poisons, (Poison Ivy, Poison Oak)
Eye Protection – Eye protection must be worn to reduce the risk of
eye injury from airborne objects.
Foot Protection – Foot Protection must always be worn to reduce the
risk of foot injury from falling logs. When splitting, logs may slip when
being lifted, or may fall off the splitting bed.
Hearing Protection – Hearing protection must be worn to reduce the
risk of hearing loss. Engines are loud enough to cause risk of hearing
loss when exposed over a long period of time.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Split-fire Holzspalter Handbücher
Beliebte Holzspalter Handbücher anderer Marken
Scheppach
Scheppach OX 3-1000 Montageanleitung
Swisher
Swisher 21200 Bedienungsanleitung
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Bedienungsanleitung
Champion Power Equipment
Champion Power Equipment 90720 Handbuch
Boss Industrial
Boss Industrial ES5T20 Bedienungsanleitung
Villager
Villager LSP 12 T Bedienungsanleitung
