Spotlight PIC HS Bedienungsanleitung

I - DESCRIPTION OF THE PROJECTOR

II - GENERAL

III - INSTALLATION

WARNING!

ALWAYS

CONNECT THE

PROJECTOR TO A

MAIN WHICH IS

PROTECTED BY A

SUITABLE

ELECTRIC FUSE

SELECTED

ACCORDING TO

THE

INSTRUCTIONS

1. Suspension clamp

2. Accessory guides

3. Accessory locking spring

4. Lever handle for adjusting inclination of projector

5. Lamp holder tray access knob

6. Lamp position adjustment knob

7. Screws to adjustlamp

8. Safety chain anchorage clamp

9. Wing nut for locking and adjusting projector focus

10. Lever handle for lens adjustment (Zoom)

11. N° 4 levers for flaps adjustment

The projector you have bought satisfies directives

73/23/EEC as it complies with standards EN 60598-1

and EN 60598-2-17.

!model

!maximum supply voltage in V

!maximum power of the projector in W

!the index of protection IP

!maximum temperature of the environment admitted

in °C

!maximum temperature of the projector body in °C

!minimum distance from any inflammable surface

!information to find the position 0° of the projector:

when the tip of the arrow points upwards

!maximum angle of inclination upwards and

downwards. These limits, imposed by the lamp

manufacturer, should not be exceeded as they

would reduce the projector’s useful life or lead

to its deterioration.

The projector can be either suspended or mounted on a

stand.

WARNING!

DO NOT INSTALL THE PROJECTOR ON SURFACES

WHICH ARE USUALLY INFLAMMABLE.

The minimum distance at which the projector must be kept

from easily inflammable surfaces is indicated on the label.

The safety norms estimate that a metal wire screen be

mounted on the front of the projector to prevent any large

glass fragments from falling if the projector breaks.

WARNING!

REPLACE THE LAMP AND/OR LENS IF VISIBLY

DAMAGED.

For safety reasons always use the safety chain between the

projector and the suspension truss.

3.1 - Accessories

The accessories estimated for this projector are listed in the

price list and can be mounted by inserting into guides 2.

Followspot/steel

Line

Mod.PIC HS

IV - CHANGING THE LAMP

Your projector has been designed for a maximum

voltage of 230 V.

The power cable complies with standards CEI 20-22.

However one must make sure that the ground is always

connected.

Using the side handle 4 it is possible to release the

projector when it is locked in a certain position and

change its inclination. The same can be done as

regards its rotation with respect to the vertical axis by

loosening wing nut 9. The zoom is adjusted with levers

10, by widening or narrowing the beam of light. The

beam of light can be cut with the four flaps 11 to obtain

special effects.

VII - CLEANING

VI - FOCUS AND REGULATIONS

VIII - MAINTENANCE

The projector must be serviced at least once a year to

check the integrity of its electrical and mechanical parts.

. .

V - ELETTRICAL CONNECTIONS

For safety reasons always disconnect the projector

from the mains before opening it to change the lamp.

Open the projector latch by using knob 5. Insert the

lamp into the socket taking care not to touch the glass.

Since the new lamp may have a different centre of light,

it may be centred with knob 7 and the 2 screws 13.

For utmost projector performance, both the lens and

the reflector must be kept as clean as possible. To do

so, after disconnecting the projector from the mains,

open it and clean both the lens and reflector with a soft

cloth dampened with alcohol.

Followspot/steel

Line

Mod.PIC HS

Inhaltsverzeichnis

Andere Spotlight DJ-Equipment Handbücher

Spotlight

Spotlight Vedette 2500 compact Bedienungsanleitung

Spotlight

Spotlight FresneLED C100 DMX Series Bedienungsanleitung

Spotlight

Spotlight FresneLED 450 RGBW Bedienungsanleitung

Spotlight

Spotlight FresneLED 200 DMX Bedienungsanleitung

Spotlight

Spotlight ProfiLED 450 RGBW DMX Bedienungsanleitung

Spotlight

Spotlight mini Profile LW Series Bedienungsanleitung

Spotlight

Spotlight PR LED 250ZS TW DMX Bedienungsanleitung

Spotlight

Spotlight COM 05 PC Bedienungsanleitung

Spotlight

Spotlight Fresnel LED Hyperion 300 6C Bedienungsanleitung

Spotlight

Spotlight FN LED C100 CW DMX Bedienungsanleitung

Spotlight

Spotlight FollowLED 450 CW DMX Bedienungsanleitung

Spotlight

Spotlight Vedette 12 H CC Bedienungsanleitung

Spotlight

Spotlight PR LED 150 ZSRGBWDMX Bedienungsanleitung

Spotlight

Spotlight ProfiLED 50 ZS DMX Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung