Spotlight Sintesi AR 05 Bedienungsanleitung

I - DESCRIPTION OF THE PROJECTOR

II - GENERAL

III - INSTALLATION

WARNING!

ALWAYS

CONNECT THE

PROJECTOR TO A

MAIN WHICH IS

PROTECTED BY A

SUITABLE

ELECTRIC FUSE

SELECTED

ACCORDING TO

THE

INSTRUCTIONS

1.Suspension clamp

2. Accessory guides with retaining clip

3. Spring-loaded latch lock

4. Lever handle for adjusting projector inclination

5. Lamp holder tray access knob

6. Retaining spring for lamp holder pan

7. Hook for anchorage of safety chain

8. Lamp position adjustment knob

9. Wing nut for locking and adjusting projector focus

The projector you have bought satisfies directives 73/23/EEC

as it complies with standards EN 60598-1 and EN 60598-2-17.

!model

!maximum supply voltage in V

!maximum power of the projector in W

!the index of protection IP

!maximum temperature of the environment admitted in °C

!maximum temperature of the projector body in °C

!minimum distance from any inflammable surface

!information to find the position 0 of the projector: when

the tip of the arrow points upwards

!maximum angle of inclination upwards and downwards.

These limits, imposed by the lamp manufacturer,

should not be exceeded as they would reduce the

projector’s useful life or lead to its deterioration.

The projector can be either suspended or mounted on a stand.

WARNING!

DO NOT INSTALL THE PROJECTOR ON SURFACES WHICH

ARE USUALLY INFLAMMABLE.

The minimum distance at which the projector must be kept from

easily inflammable surfaces is indicated on the label.

The safety norms estimate that a metal wire screen be mounted

on the front of the projector to prevent any large glass fragments

from falling if the projector breaks.

WARNING!

REPLACE THE LAMP AND/OR LENS IF VISIBLY DAMAGED.

For safety reasons always use the safety chain between the

projector and the suspension truss.

3.1 - Accessories

The accessories estimated for this projector are listed in the

price list and can be mounted by inserting into guides 2.

3.1.1. - Colour changer

Insert the flange of the colour changer into its guide so that the

latch remains closed and the retaining spring is released.

Connect the safety cable to the special hook of the projector.

3.1.2. - Lens flaps

Mount them in the same way as the colour changer.

Sintesi Line

Mod.AR 05- Ar12 -AR 25

Mod.VA 05- Va12 - VA 25

V - ELECTRICAL CONNECTIONS

Using the side handle 4 it is possible to loosen the

projector when it is locked in a certain position and thus

change its inclination. In the same way, the projector is

rotated with respect to its vertical axis by loosening the

wing nut 9. By turning knob 8, the lamp carriage is shifted

forward or backward to widen or narrow the beam of light

respectively.

For utmost projector performance, both the lens and the

reflector must be kept as clean as possible. To do so, after

disconnecting the projector from the mains, open it and

clean both the lens and reflector with a soft cloth

dampened with alcohol.

VI - FOCUS AND REGULATIONS

VIII - MAINTENANCE

The projector must be serviced at least once a year to

check the integrity of its electrical and mechanical parts.

VII - CLEANING

For safety reasons always disconnect the projector from

the mains before opening it to change the lamp.

Open the projector lamp holder tray by means of knob 5.

Insert the lamp into the socket taking care not to touch the

glass. Please note that it is not necessary to change the

position of the lamp carriage and as a consequence the

optical adjustment of the projector remains unchanged.

WARNING!

TO MOUNT A 1200 W LAMP (WITH A HIGHER CENTRE

OF LIGHT) IN LIEU OF A 1000 W LAMP, THE PAN

FITTED WITH THE LAMP HOLDER MUST BE SHIFTED

FROM THE HIGH POSITION TO THE LOW POSITION

(SEE DIAGRAM) AFTER ROTATING THE RETAINING

SPRING 6. RE-POSITION THE SPRING AT THE END

OF THE OPERATION. .

IV - CHANGING THE LAMP

Your projector has been designed for a maximum voltage

of 240 V.

The power cable complies with standards CEI 20-35.

However one must make sure that the ground is always

connected.

Sintesi Line

Mod.AR 05- Ar12 -AR 25

Mod.VA 05- Va12 - VA 25

Andere Handbücher für Sintesi AR 05

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Spotlight Projektor Handbücher

Spotlight

Spotlight PIC MS-ME Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung