2
Safety Disclaimer
Only trained and responsible personnel should operate high
voltage equipment. Display warning labels prominently prior to and
during testing. Portable holiday detectors are designed to operate
and maintain an electric current output well below levels which could
cause injury. However, you may experience a mild shock if the test
electrode or ground is touched while the equipment is activated.
Wear rubber or plastic gloves and non-conductive footwear to
minimize potential shock. Keep in mind that the shock prevention
effectiveness of the rubber or plastic glove and footwear is limited to
the condition of their protective surface. Make sure your gloves and
footwear are void of tears and holes and are in good condition.
Use of Portable Holiday Detectors is limited to finding defects in
insulating materials. Testing should be conducted clear of personnel
not involved in the testing procedure. Personnel operating Portable
Holiday Detectors should be aware of the safety limitations imposed by
their environment at all times. Operator should have an assistant to
ensure that unauthorized personnel are kept clear of the testing area.
Danger: Portable Holiday Detectors create an arc or spark. Use
of a Portable Holiday Detector in or around combustible or
flammable environments can result in an explosion. When operating in
any potentially hazardous area, consult with the plant or site safety offi-
cer before proceeding with a holiday detection test in any
potentially hazardous or suspect area.
WARNING....This is a class A product. In a domestic environment
this product may cause radio interference in which case the user may
be required to take adequate measures.
NOTE.... Holiday detectors create a spark during their normal course
of operation when a defect in the pipe coating is found.
This spark will cause radio interference. During the device’s passive
or search mode, it qualifies as a class A product.
EMI Disclaimer
Warranty
Pipeline Inspection Co., Ltd., hereafter referred to as (SPY®) warrants
that SPY‚ Model 7X5/9X5/1X5 Series Holiday Detectors and
Jeepmeters shall, under normal use and service, be free from defects in
material and workmanship. SPY®‘s entire warranty obligation shall be
limited to, at SPY®'s option, the repair or replacement free of charge to
the buyer of any defective equipment or parts thereof which prove to be
defective in material and workmanship under normal use and service.
Claims for defective parts must be made in writing within twelve
(12) months after shipment of the equipment from the works of SPY®.
Fast wearing and consumable parts including, but not limited to,
electrodes and ground cables, are expressly excluded from the
warranty. SPY®shall have the option to require return of a claimed
defective part to SPY®'s plant in the U.S.A., freight prepaid by buyer
for examination to establish buyer's claim.
Except with SPY®'s prior written approval, SPY®shall not be liable
(a) for the cost of repairs, alterations or replacements or any expense
connected therewith made or incurred by the buyer or its designees,
or (b) for defects resulting from alterations or repairs made by others
than SPY‚ or its approved representatives.
SPY®shall not be liable for damages, including but not limited to
direct, special, indirect or consequential, resulting from the handling,
or use, whether alone or in combination with other products, or any
SPY®equipment or third party designed or manufactured equipment,
including without limitation, any loss or damage sustained or caused
by the operation and use of the equipment which is improperly
operated or its successful operation is impaired by natural elements
after its delivery to the buyer.
The foregoing warranty is exclusive and in lieu of all other warranties
whether written, oral or implied (including without limitation, any
warranty of merchantability or fitness for purpose).
15
Safety Disclaimer
Only trained and responsible personnel should operate high
voltage equipment. Display warning labels prominently prior to and
during testing. Portable holiday detectors are designed to operate
and maintain an electric current output well below levels which could
cause injury. However, you may experience a mild shock if the test
electrode or ground is touched while the equipment is activated.
Wear rubber or plastic gloves and non-conductive footwear to
minimize potential shock. Keep in mind that the shock prevention
effectiveness of the rubber or plastic glove and footwear is limited to
the condition of their protective surface. Make sure your gloves and
footwear are void of tears and holes and are in good condition.
Use of Portable Holiday Detectors is limited to finding defects in
insulating materials. Testing should be conducted clear of personnel
not involved in the testing procedure. Personnel operating Portable
Holiday Detectors should be aware of the safety limitations imposed by
their environment at all times. Operator should have an assistant to
ensure that unauthorized personnel are kept clear of the testing area.
Danger: Portable Holiday Detectors create an arc or spark. Use
of a Portable Holiday Detector in or around combustible or
flammable environments can result in an explosion. When operating in
any potentially hazardous area, consult with the plant or site safety offi-
cer before proceeding with a holiday detection test in any
potentially hazardous or suspect area.
WARNING....This is a class A product. In a domestic environment
this product may cause radio interference in which case the user may
be required to take adequate measures.
NOTE.... Holiday detectors create a spark during their normal course
of operation when a defect in the pipe coating is found.
This spark will cause radio interference. During the device’s passive
or search mode, it qualifies as a class A product.
EMI Disclaimer
Warranty
Pipeline Inspection Co., Ltd., hereafter referred to as (SPY®) warrants
that SPY‚ Model 7X5/9X5/1X5 Series Holiday Detectors and
Jeepmeters shall, under normal use and service, be free from defects in
material and workmanship. SPY®‘s entire warranty obligation shall be
limited to, at SPY®'s option, the repair or replacement free of charge to
the buyer of any defective equipment or parts thereof which prove to be
defective in material and workmanship under normal use and service.
Claims for defective parts must be made in writing within twelve
(12) months after shipment of the equipment from the works of SPY®.
Fast wearing and consumable parts including, but not limited to,
electrodes and ground cables, are expressly excluded from the
warranty. SPY®shall have the option to require return of a claimed
defective part to SPY®'s plant in the U.S.A., freight prepaid by buyer
for examination to establish buyer's claim.
Except with SPY®'s prior written approval, SPY®shall not be liable
(a) for the cost of repairs, alterations or replacements or any expense
connected therewith made or incurred by the buyer or its designees,
or (b) for defects resulting from alterations or repairs made by others
than SPY‚ or its approved representatives.
SPY®shall not be liable for damages, including but not limited to
direct, special, indirect or consequential, resulting from the handling,
or use, whether alone or in combination with other products, or any
SPY®equipment or third party designed or manufactured equipment,
including without limitation, any loss or damage sustained or caused
by the operation and use of the equipment which is improperly
operated or its successful operation is impaired by natural elements
after its delivery to the buyer.
The foregoing warranty is exclusive and in lieu of all other warranties
whether written, oral or implied (including without limitation, any
warranty of merchantability or fitness for purpose).
15
2
