Spypen Zemo Bedienungsanleitung

User’s Manual

zemo

Product Overview

1. Speaker

2. Lens

3. Zoom button 12

1. Status LED

2. Thumbnail button

3. Capture/Playback button

4. Mode button

5. Display On/Off button

6. Left button

7. Down button

8. Menu/OK mode

9. Right button

10. Up button

1. Hand strap holder

2. LCD panel

3. USB port

4. TV-out terminal cover

5. Self-timer LED

6. Microphone

1. Shutter button

2. Power button

3. Battery door

4. Tripod socket

Table of Contents

1 Getting Started ....................................................................................................................... 4

• What Can I do with my Camera? ............................................................................................ 4

• What can I do with my Digital Pictures?................................................................................... 4

• What can I do with my Audio/Video clips ?............................................................................... 4

• Camera Package Contents ..................................................................................................... 4

• Attaching the Hand Strap ...................................................................................................... 5

• Installing the Batteries .......................................................................................................... 5

• Charging the Battery ............................................................................................................ 5

• Inserting the SD (Secure Digital) Card .................................................................................... 6

• Turning the Camera On and Off ............................................................................................. 6

• Checking the Battery Level .................................................................................................... 6

2 Camera Setting....................................................................................................................... 7

• Checking Camera Status ....................................................................................................... 7

• Camera Modes ..................................................................................................................... 7

• Turning the Information Display and the LCD Screen On/Off....................................................... 7

• Setting Auto Power off .......................................................................................................... 7

• Setting Date and Time .......................................................................................................... 8

• Setting Display Language ...................................................................................................... 8

3 Taking Pictures ....................................................................................................................... 8

• Taking a Picture.................................................................................................................... 8

• Setting Exposure Compensation ............................................................................................. 8

• Setting the White Balance ..................................................................................................... 9

• Setting Sharpness ................................................................................................................ 9

• Setting Picture Size .............................................................................................................. 9

• Setting Self-timer .............................................................................................................. 10

• Zoom in and out................................................................................................................. 10

• Setting the Date Stamp....................................................................................................... 10

• Setting Frequency .............................................................................................................. 10

4 Recording Video Clips and Audio clips....................................................................................... 11

• Recording Video Clips.......................................................................................................... 11

• Setting Image Size ............................................................................................................. 11

• Recording Audio Clips.......................................................................................................... 11

5 Managing Pictures, Video and Audio Clips ................................................................................. 12

• Reviewing Pictures on the LCD Screen................................................................................... 12

• Rotating the displayed picture .............................................................................................. 12

• Playback Video/Audio clip on the LCD Screen ......................................................................... 12

• Protect or Unprotect Picture, Video or Audio clip ..................................................................... 12

• Deleting One Picture, Video or Audio Clip............................................................................... 13

• Deleting All Pictures, Video and Audio Clips ............................................................................ 13

• Formatting the SD Card....................................................................................................... 13

• Setting TV-out ................................................................................................................... 13

6 Installing the Software onto a Computer .................................................................................. 14

• Installing the Software ........................................................................................................ 14

• Software Included with Your Camera..................................................................................... 14

• Computer System Requirements........................................................................................... 15

7 Transferring Pictures, Video/Audio Clips to a Computer............................................................... 15

• Before Transferring Pictures ................................................................................................. 15

• Connecting to Your Computer............................................................................................... 15

• Transferring the Pictures, Audio clips and Video clips to PC....................................................... 16

• Transferring the Pictures, Audio clips and Video clips to Mac ..................................................... 16

8 Using the Camera as a Web Cam (PC only) ............................................................................... 16

• Setting up NetMeeting™ ...................................................................................................... 16

• Start NetMeeting™ ............................................................................................................. 16

9 Troubleshooting Problems....................................................................................................... 17

• Troubleshooting ................................................................................................................. 17

10 Getting Help ......................................................................................................................... 18

• Customer Support .............................................................................................................. 18

• ArcSoft Software Help ......................................................................................................... 18

11 Appendix ............................................................................................................................. 18

• Technical Specifications ....................................................................................................... 18

• Camera Default Settings...................................................................................................... 19

• Using Your Batteries ........................................................................................................... 19

• Tips, Your Safety & Maintenance........................................................................................... 19

• Uninstalling the Camera Driver(PC only) ................................................................................ 19

• Regulatory Information ....................................................................................................... 20

1 Getting Started

• What can I do with my Camera?

Capture Enjoy point-and-shoot operation. Store pictures, audio and video clips to a

SD card.

Set Up Select various camera settings.

• What can I do with my Digital Pictures?

View View the pictures on a TV through the TV-out cable or on a computer.

Save Save the pictures to a computer memory by Mass Storage interface.

Communicate Send the pictures over the Internet to family and friends.

• What can I do with my Audio/Video clips ?

Playback Playback audio/video clips on a TV through the TV-out cable or on a computer

using your system default video application.

Save Save audio/video clips to the computer memory by Mass Storage interface.

Communicate Send the audio/video clips over the Internet to family and friends.

• Camera Package Contents

Li-Polymer

rechargeable battery

TV-out cable

The CD-Rom includes

My Digital Cam Driver (PC)

Arcsoft® Software Suite (PC & Mac)

Microsoft® NetMeeting™

Adobe® Acrobat® Reader (PC & Mac)

User’s manual in PDF format.

Hand Strap USB Cable

Warranty Card

Spypen zemo Pouch

• Attaching the Hand Strap

• Installing the battery

A piece of rechargeable Li-polymer battery is supplied with the camera.

1. Open the camera battery door by pushing it outwards as illustrated.

2. Insert the battery as shown, ensuring you follow the +/- signs on outside of the battery slot.

3. Close the battery door by pressing it downwards then slide it back to lock.

• Charging the Battery

Please fully charge the battery for up to ten hours before you use the camera for the first time after

purchased. Follow the following steps to charge and recharge the battery.

Using USB cable via computer

1. Plug the end labelled of the USB cable into the socket marked on your computer.

2. Plug the other end of the USB cable into the USB port on the camera.

3. The battery charge indicators will blink in turn when the battery is charging, and they will all keep on

when the battery charging completes.

4. It takes approximately three hours to fully recharge the battery each time.

NOTE:

• The new hardware wizard launches when the camera is connected with a computer that has not installed the software

supplied. Please leave the camera connected and ignore the new hardware wizard when you recharge the camera.

• If you have already installed the software supplied on you computer, the camera will become a PC camera when

connected to the computer for recharging.

• Inserting the SD (Secure Digital) Card

This camera does not have internal memory. Please insert a SD card before taking pictures or recording

audio/video clips. Turn off the camera before inserting or removing the SD card. Be sure to orient the card

correctly when inserting it. Never try to force the SD card into the slot when you feel resistance. The SD card

has a write protect switch, which you can use to protect data from accidental deletion. Therefore, whenever

you want to record, format or delete files in the SD card, disable the write protection beforehand.

1. Turn off the camera.

2. Open the SD card door by pushing it outwards as illustrated.

3. Insert the SD card, following the icon

on outside of the SD card slot.

4. Close the SD card door by pressing it downwards and then slide it back to lock.

IMPORTANT!

• Never insert any other object which is not a SD card into the camera’s SD card slot. Doing so will create the risk of

damaging to the camera and the card.

• Make sure that the terminals of the SD card is facing towards the front of the camera.

• Should water or any foreign object ever get into the card slot, immediately turn off the camera and remove the battery,

and then contact your dealer or nearest service provider.

• Never remove the SD card from the camera while the camera is powered on. Doing so can cause failure to the picture

recording operation, and even damage the memory card.

• Turning the Camera On and Off

1. Open the LCD panel.

2. To turn on the camera, press and hold the Power button until the

Status LED turns on. The Status LED turns off in one second.

3. Press and hold the Power button again will turn the camera off.

Power button

• Checking the Battery Level

Check the battery power level before taking pictures.

1. Open the LCD panel.

2. Turn on the camera.

3. Check the battery status level that appears on the LCD screen.

Battery has adequate power.

Running out of battery. Battery needs to be recharged.

2 Camera Settings

• Checking Camera Status

Open the LCD panel. Turn on the camera, view the camera LCD screen to check which camera settings are

active. If the feature icon is not displayed, it means that particular feature is not activated.

Capture Mode Playback Mode

Still Image Solution Camera Status

Battery Status

Other Features

1600 X 1200

1280 X 960

640 X 480

Pictures can be

taken

Still Picture Mode

The length of video

clip

SD Card inserted

Self-timer On

Image size

Video Mode

Audio Mode

Auto Exposure

Compensation

Auto White Balance

Folder

Number of

picture displayed

Full

Low

Video Resolution

448 X 336

320 X 240

192 X 144

Image size

00:00

ON Locked le

IMPORTANT:

All the settings return to their default setting when the camera is turned off and turned on again. Make sure you verify

your settings when turning the camera on again. Please refer to the Camera Default Setting on page 19 for detailed

camera default settings.

• Camera Modes

The camera has Capture mode and Playback mode. Press the Capture/Playback button to switch between

them.

Capture mode includes Video mode, Still image mode and Audio mode. Press the Mode button to scroll

through them. The default setting is Video mode.

• Turning the Information Display and the LCD Screen On/Off

In all the modes, press the Display on/off button once to turn off the information display on the LCD screen,

press it again will turn off the LCD screen. Press the Display on/off button once more will turn on the

information display and the LCD screen.

Press

• Setting Automatic Power Saving

This camera is designed to automatically power off to save battery life in 30/60/90 seconds of inactivity.

Press the Power button if you want to turn on the camera again.

You can change the power saving setting by the following steps:

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press Press Press

You can also change the power saving setting under Video and Playback modes.

• Setting Date and Time

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press

You can also change the Date and Time setting under Video mode.

• Setting Display Language

Under this setting, you can select the language you prefer for the LCD screen.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press Press Press

You can also change the Language setting under Video mode.

3 Taking Pictures

• Taking a Picture

1. Open the LCD panel, and turn on the camera.

2. Press the Mode button to set the camera to Still image mode, the

icon appears on the LCD screen.

3. Use the LCD screen to frame your subject.

4. Press the Shutter button completely down to take a picture. Hold

the camera steady. Two beeps will sound when the picture has

been taken.

Shutter button

• Setting Exposure Compensation

You can adjust the exposure compensation value (EV) within the range of -1.5EV to +1.5EV in order to

compensate for current lighting conditions. This setting can be used to obtain better result when shooting with

backlighting, indirect indoor lighting, a dark background, etc.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press

NOTE:

• A higher EV value is best for light-colored subjects and backlight subjects. A lower EV value is best for dark-colored

subjects and for shooting outdoors on a clear day.

• When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after

performing exposure compensation.

• Exposure compensation returns to its standard default setting (AUTO) after you turn off and turn on the camera

again.

• Setting the White Balance

Selecting the right type of white balance can help to make the color of a subject appear more natural under

the type of lighting that is available.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press

• Setting Sharpness

Use the Sharpness setting to highlight or to soften the edges of the subject.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press

Normal Use when no special effect is needed. Ideal for everyday pictures.

Sharp Increases contrast on the edges of the picture. Ideal when you want to improve the clarity of a

picture, or if you later may want to crop or cut out specific areas in the picture.

Soft Softens the edges of the picture, creating a “soft focus” effect.

• Setting Image Size

Picture quality depends on both its resolution and the JPEG file compression that the camera applies when

the picture is taken. Higher resolution and less compression make better quality which occupies more

memory space. Smaller size pictures and normal quality are easier to email while larger size and fine quality

are better for printing.

Open the LCD panel, then turn on the camera and set it to Still image mode. Use the Image size setting to

select a picture resolution.

Press Press Press

Here are the approximate numbers of pictures you can expect the camera to hold at each setting based on

the 32MB SD card memory.

High : 1600 x 1200; approximately 77 pictures

Middle : 1280 x 960; approximately 116 pictures

Low : 640 x 480; approximately 378 pictures

Note

Scene complexity affects a picture’s le size. For example, the le size of a picture with trees in autumn is larger than

that of the blue sky at the same resolution and quality setting. Therefore, the number of pictures you can store in the

SD card may vary. The number of pictures on the LCD screen is for reference only.

• Setting Self-timer

Your camera is designed with a self-timer function, which allows you to take pictures with a 10-second

built-in timer.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press Press Press

The Self-timer function is only applied to next picture. When the self-timer is activated, the status LED turns

green, while the self-timer LED turns blue and blinks slowly for 7 seconds, then blinks quickly for 3 seconds

before the picture is taken. Please place the camera on a flat surface or use a tripod.

This setting is also available in Video mode.

• Zoom in and out

Your camera is designed with 3X digital Zoom. This feature lets you zoom in

on the central area of a photo and photograph only the enlarged portion of

the picture. Digital zoom applies to only one photo at a time. Push the Zoom

button up and down to Zoom in and out.

Zoom button

• Setting the Date Stamp

Use the Date Stamp setting to imprint the date on your pictures. Make sure the camera clock is set to the

correct date before setting the Date Stamp.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press Press Press

When the date stamp is selected, the pictures taken will have the current date stamped on the bottom right

corner while view them on a computer or print them out.

• Setting Frequency

In order to take a better indoor picture, the camera needs to be set to suit the correct lighting frequency.

Set the frequency to 60Hz for US, 50Hz for Europe.

Open the LCD panel, then turn on the camera and set it to Still image mode.

Press Press Press

This setting is also available in Video mode.

Inhaltsverzeichnis

Andere Spypen Camcorder Handbücher

Spypen

Spypen IUNO Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Panasonic

Panasonic NV-VS40B Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Panasonic

Panasonic AG-HMC152EN Bedienungsanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Panasonic

Panasonic HDC-SD100 Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

Panasonic

Panasonic NVM40 Bedienungsanleitung

Spypen zemo Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken