Spypoint TINY-3 Bedienungsanleitung
Digital Surveillance Camera
Système de surveillance photographique
Fotografisches Überwachungs system
TINY-3/S-TINY-3/TINY-W3/S-TINY-W3 model
Modèle TINY-3/S-TINY-3/TINY-W3/S-TINY-W3
Modell TINY-3/S-TINY-3/TINY-W3/S-TINY-W3
User manual /Manuel d'utilisation /
Bedienungsanleitung
www.spypoint.com
g
g
y
TINY-3 S-TINY-3
TINY-W3 + Blackbox-DTM S-TINY-W3 + Blackbox-DTM
3
English
v.1.4
English
Thank you for choosing one of our excellent
SPYPOINT products. You can now enjoy many benefits of a
full feature and easy to use digital surveillance camera. This
10 MP digital camera was developed and designed by our
team of highly qualified engineers. It can take sharp and clean
photos or videos either day or night without using any flash.
45
English
English
FEATURES
Photo recording:
Photo resolution 10 MP
File format JPG
Time Lapse Predefined intervals from
30sec to 1h
Multi-shot Up to 6 pictures per detection
Stamp Date, time, temperature
and moon phase printed
on pictures
Capture mode Color by day,
black and white by night
Video recording:
Video resolution 1280 x 720 (720p)
File format AVI
Sequence length Adjustable from 10 to 90sec
Capture mode Color by day, black
and white by night
Sound recording: Automatically recorded
in video mode
Memory storage: SD/SDHC card up to 32 GB
(No internal memory)
Viewing:
Built-in screen 2.4" LCD
TV output Composite video (PAL/NTSC)
Computer output USB 2.0
Power supply:
(accessories sold separately, see «Options»)
Alkaline or lithium
batteries
6x AA
Lithium battery pack Rechargeable battery pack
(LIT-09/LIT-C-8)
External
(12V jack)
12 volt battery
(KIT-12V/BATT-12V)
12 volt adapter (AD-12V)
Solar panel
(12V jack)
Solar panel (SP-12V)
combined with rechargeable
battery pack (LIT-09)
67
English
English
Detection system:
Motion sensor PIR
Detection angle of the
main sensor
30°
Detection angle of the
side sensors
70°
Detection range Adjustable from 5 to 50ft
Delay between each
detection
Adjustable from 1 to 30min
*Additional 10 sec. setting
(see «Delay»)
Electricity mode
(Connected to a 12V DC
Main source only)
Instant trigger time
External trigger 1/8" jack for normally
open contact
Night time illumination system:
LEDs 38 LEDs
Type Invisible Black LEDs
Exposure Automatic infrared level
adjustment
Optical field of view: 40°
Wireless:
Wireless range Maximum 500 ft to the
Blackbox-DTM controller
(supplied with TINY-W3/
S-TINY-W3)
Remos Technology This camera is compatible
with Spypoint Remos
Technology (see «Settings»)
Recommendations:
Operating temperature (-20 °C to + 50 °C)
(-4 °F to +122 °F)
Storage temperature (-30 °C to + 75 °C)
(-22 °F to +167 °F)
CONTENTS
SPYPOINT
TINY-3/S-TINY-3
• Installation strap
• USB cable
• Audio/video cable
• User manual
SPYPOINT
TINY-W3/ S-TINY-W3
• Blackbox-DTM controller
• Installation straps (2)
• USB cable
• Audio/video cable
• User manuals
89
English
English
REAR VIEW
BOTTOM VIEW
7.
10.9. 11.
13.
8.
12.
OK
BUSY
1.
2.
3.
4.
5.
6.
1. Power button
2. Recording indicator LED
3. «UP» button
4. «BACK» button
5. «OK» button
6. «DOWN» button
7. ALK / RECH (switch for battery)
8. SD card slot
9. USB port
10. 12 volts jack
11. External trigger jack
12. TV OUT
13. Removable battery case
POWER
The battery level is shown in the «Report» mode.
(4/4 = full, 1/4= low) When the battery level shows 2/4,
the camera will continue to take pictures but we strongly
recommend changing the batteries before they are empty.
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
During the installation of alkaline batteries, place the switch
inside the battery case to «ALK» (i.e. alkaline). Insert the
batteries in the battery case as indicated and insert it inside
the camera (see figure below). Exact polarity must be
followed. We also recommend the use of new batteries to
ensure maximum performance of your camera.
10 11
English
English
Lithium battery pack
This SPYPOINT camera can be powered by a rechargeable
lithium battery LIT-09/LIT-C-8 (sold separately, refer to
the section «Options»). This type of battery is less affected
by cold temperatures and lasts up to 3 times more than an
alkaline battery. During the installation of lithium battery,
place the switch inside the battery case to «RECH». Insert
the battery in the case as indicated and insert it inside the
camera (see figure below)
PINTSPY
TM
INTPSPY
ConnectorConnector
Top
ConnectorConnector
Top
TINY-3
PINTSPY
TM
INTPSPY
ConnectorConnector
TO INSERT THE BATTERYCASE INSIDE
THE CAMERA
External (12V)
The camera can be powered from an external 12 volt DC
input such as a 12 volt battery (KIT-12V/BATT-12V, sold
separately) or a 12 volt adapter (AD-12V, sold separately).
When using a 12 volt connection, we recommend you to
remove the alkaline batteries to prevent surcharges. During
the installation of 12 volt battery, place the switch inside the
battery case to «ALK» (i.e. alkaline). If combined with a
lithium battery pack, slide the switch to «RECH». To find
the accessories available for the 12 volts, refer to the section
«Options».
12 13
English
English
Solar panel
This model also offers the possibility of a connection to
a solar panel SP-12V (sold separately, refer to the section
«Options») to maintain the charge of the lithium battery
(sold separately, refer to the section «Options») or the 12
volt battery (sold separately, refer to the section «Options»).
During the installation of the rechargeable lithium battery
or 12 volt battery, slide the switch inside the battery case to
«RECH» to activate the charging system of the solar panel.
MEMORY CARD
Using a memory card (sold separately, refer to the section
«Options») is required to operate this SPYPOINT camera.
When the camera is turned on, the screen displays «Insert
memory card» in «Photo», «Video» or «Test» mode
if no memory card is used, the camera also beeps. The
SD slot of the camera and the controller (supplied with
TINY-W3/S-TINY-W3) have a 32 GB memory capacity.
Before inserting or removing the memory card, the
camera must be turned off. Failing to do so may cause
loss of or damage the pictures already recorded from
the memory card. When the SD card is full, the viewing
screen indicates «Disk full» when «Photo», «Video» or
«Test» mode are selected. The following data shows an
approximate quantity of photos or video length that can be
taken by the camera depending on the memory card capacity.
RESOLUTION 2.0 GB 4.0 GB 8.0 GB 32 GB
4 MP
6 MP
8 MP
10 MP
12 MP
1900
1580
1190
950
790
3800
3160
2380
1900
1580
7600
6320
4760
3800
3160
30400
25280
19040
15200
12640
VIDEO RESOLUTION
640 x 480
1280 x 720 (720p) 65 min
40 min 2h10
1h20 4h10
2h40 16h40
10h40
«BUSY» LED
The «BUSY» light, located beside the LCD screen, lights up
when the camera records a file.
WIRELESS
REMOS TECHNOLOGY
This Remos compatible camera benefits from wireless
capabilities and can be combined with:
• RC-1 ―Remote control (control of the camera remotely)
• MS-1 ―Motion sensor (trigger of the camera remotely)
• IRB-W ―Infrared Booster (increases the lighting power)
Refer to the section «Settings» for details
Note: The optional steel security box (SB-T) affects
wireless functionalites of products compatible with Remos
technology.
14 15
English
English
COMBINE THE TINY-3/S-TINY-3 TO THE
WIRELESS SYSTEM TINY-W3/S-TINY-W3
Remove the cap and screw the antenna on the side of the
TINY-3/S-TINY-3 camera. The camera can be added to
the wireless system TINY-W3/
S-TINY-W3 composed of TINY-W3/
S-TINY-W3cameraandBlackbox-DTM
controller. Up to 10 cameras can be
combined to a single Blackbox-DTM
(see Blackbox-DTM manual for more
details).
PROGRAMMING
Turnonthecamerato navigate in the interface bypressing
«» or «» and press «OK» for selection. To modify the
selection, press «» and «» again and press «OK» to
confirm. To return to the previous menu press «».
PHOTO
To take pictures. The «Photo» mode must be selected
by pressing «OK»; the test light in the front of the
camera will wink for 60 seconds to allow the operator to
walk away from the camera.
VIDEO
To take videos. The «Video» mode must be selected
by pressing «OK»; the test light in the front of the
camera will wink for 60 seconds to allow the operator to
walk away from the camera.
TEST
To set the camera or the distance. When «Test» mode
is selected, no picture or video is recorded. Walk
perpendicularly in front of the camera. When the camera
detects movement, the light winks to indicate that normally,
a photo or video would have been recorded. If the system
does not detect the movement, increase the distance detection
using the «Settings» menu (the option «Sensitivity» allows
the user to set the sensitivity to «High», «Medium» or
«Low»). You can also realign the camera differently. Once
you understand how the device responds to detections, you
can better adjust the direction or the height of the camera
In «Test» mode, it is possible to take a picture by pressing
the «OK» button. The photo is saved and appears in
«View» mode.
How to properly install your camera
using the supplied installation strap:
(Recommanded installation height: about 3 feet).
16 17
English
English
SETTINGS
To define the options of the camera. To configure
the system in English, hold the button «» until
«Language» is highlighted. Press «OK», select «English»
and confirm your choice with «OK». The system will change
all the menus in English by itself.
Camera ID Allow the user to set the camera name
(maximum 8 characters)
Time Start /
Time Stop: Allow the user to set the period of operation
of the camera. The start and stop time are
the hours during the camera is in action and
records pictures or videos. Example: if the
user selects a start time «7:00 am» and a stop
time «11:00 am», the camera will only detect
for that period of time and will stay inactive
for the remaining hours. Press «OK» and use
«» or «» to adjust the hour. Press again
«OK» to set the minutes. When the time is
properly set, press «OK» once more to go
back to other settings.
For an activation of 24 hours, the same start
and stop time must be entered (example:
00:00 as start time and 00:00 as stop time.
These hours are the basic configuration of
your camera)
Note: The hours can be recorded over a
12 or 24 hours period. Refer to «Setting»/
«Time format» (00:00 means midnight)
Wireless:
(On/Off)
Enables or disables the wireless transmission
of images to the Blackbox-DTM controller
(supplied with the TINY-W3/S-TINY-W3).
When the transmission is enabled:
• Only pictures are transmitted to the
controller, not videos.
• The quality of the photos on the controller
is reduced to maximize transmission:
10MP = 800 x 600 pixels
5MP = 640 x 480 pixels
3MP = 320 x 240 pixels
• When in «Time Lapse» mode, photos are
sent to the controller except for the «30s»
setting.
• When the delay setting «10s» is selected,
the time between each detection is
calculated when the transmission
is completed. For example, if the
transmission takes two seconds, the time
between the two detections is 12 seconds.
18 19
English
English
Delay:
(10s/1m/3m/5m/
10m/15m/30m)
Select the time interval between two photos
or videos.
Additional setting: it is possible to decrease
the delay between detections to 10 seconds
(instead of 1 minute) by using the following
procedure. Note that the battery life will be
affected.
Turn OFF the camera. Press and hold the
«» button and turn the camera ON . «10sec
enabled» appears on the screen meaning
the minimum delay is now 10 seconds. If
this option is used, the 30 minute delay
disappears. To reset the camera to 1 minute
delay, follow the same procedure. «10sec
disabled» appears on the screen (see figure
below)
Multi-shot:
(1/2/3/4/5/6
consecutive shots)
Take up to 6 consecutive shots at each
detection,witha10seconddelaybetweeneach
photo. This option allows up to 6 pictures
from different angles when the camera is in
«Photo» mode.
10SEC DISABLED10SEC ENABLED
10 sec delay 1 min delay
Video length:
(10s/30s/60s/90s) Allow the user to select the recording
duration when the camera is set in «Video»
mode.
Language:
(English/Français/
Deutsch/Italiano/
Norsk/Česky/
Suomi/Magyar/
Polski)
Select a language for the camera’s menu.
Sensitivity:
(High/Medium/
Low)
Allow the user to choose between three
different levels of sensitivity: «High»,
«Medium» or «Low». The camera will only
detect sources of heat in movement. Make
sure to have the least possible objects in front
of the camera during the positioning. This
prevents picture taken by the camera when
oriented towards the sun while an object
moves in front of the camera (e.g. a branch)
Date: Set the date as Month / Day / Year
Time format:
(12h/24h)
Allow the user to choose between a 12 or
24 hours period time displays on the photos
(eg. 6:00 pm or 18:00)
Time: Set the time as Hour / Minute
Andere Handbücher für TINY-3
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Sprachen:
Andere Spypoint Digitalkamera Handbücher
Spypoint
Spypoint LINK-MICRO-S-LTE Bedienungsanleitung
Spypoint
Spypoint FLEX Bedienungsanleitung
Spypoint
Spypoint LINK-S Bedienungsanleitung
Spypoint
Spypoint IR-B Bedienungsanleitung
Spypoint
Spypoint LINK-MICRO-LTE Bedienungsanleitung
Spypoint
Spypoint LINK-MICRO-S-LTE Bedienungsanleitung
Spypoint
Spypoint FL-A Bedienungsanleitung
Spypoint
Spypoint LIVE Bedienungsanleitung
Spypoint
Spypoint LINK-DARK Bedienungsanleitung
Spypoint
Spypoint XCEL HD Bedienungsanleitung
