SR Instruments SR Scales SR7005i Service-Handbuch

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 1 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

by SInstruments, Inc.

Operating and Service

Manual

Model SR7005i

Wall Mount In-Room

Mini Platform Scale

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 2 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

TABLE OF CONTENTS

PACKING CHECKLIST.................................................................................................................3

INSTALLATION..............................................................................................................................3

MICROBAN ANTIMICROBIAL PROTECTION.......................................................................5

SYSTEM DESCRIPTION AND INTENDED USE.......................................................................6

CLEANING AND DISINFECTING...............................................................................................7

STORAGE.........................................................................................................................................7

SPECIFICATIONS...........................................................................................................................8

BUTTON FUNCTIONS...................................................................................................................9

BASIC SYSTEM OPERATION....................................................................................................10

BATTERY REPLACEMENT.......................................................................................................11

THEORY OF OPERATION .........................................................................................................11

CALIBRATION..............................................................................................................................12

TROUBLESHOOTING.................................................................................................................14

WARRANTY...................................................................................................................................15

TABLE OF FIGURES

Figure 1: Wall Bracket...................................................................................................................4

Figure 2: Wall Bracket Installation...............................................................................................4

Figure 3: Button Display................................................................................................................9

Figure 4: Calibration Table .........................................................................................................12

Figure 5: Calibration Switch Location .......................................................................................13

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 3 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

PACKING CHECKLIST

SR7005iWall Mount In-Room Mini Platform Scale

INSTALLATION

STEP 1: Unpack the scale system and check parts against the PACKING CHECKLIST. If there are any

missing or damaged parts, please call the service hotline at 1-800-654-6360.

STEP 2: Determine the best location for the scale by considering these recommendations:

Have 28 inches of free wall / hallway space.

Platform extends 23” into the room / hallway when folded down. Hallway must be wide enough to

allow suitable access and egress for personnel using the hallway.

If using the AC power supply, a wall outlet must be located within 48” from the upper right end of

the scale.



DESCRIPTION

QUANTITY

PLATFORM SCALE

1 ea

MOUNTING BRACKET AND HARDWARE PACKET

1 ea

SIX (6) “C” CELL BATTERIES (INSTALLED)

1 ea

MEDICAL GRADE AC POWER SUPPLY

1 ea

CALIBRATION CERTIFICATE

1 ea

WARRANTY CARD

1 ea

MANUAL

1 ea

Continued next page

IMPORTANT

SCALE MUST BE INSTALLED BY

QUALIFIED PERSONNEL

WARNING

DEVICE MUST BE INSTALLED IN

A LOCATION THAT ALLOWS FOR

MEANS OF EGRESS ACCORDING

TO LOCAL, STATE AND

NATIONAL STANDARDS

WARNING

DURING SHIPPING OR STORAGE THE

DAMPER THAT CONTROLS THE

LOWERING OF THE PLATFORM MAY LOSE

ITS PRIME CAUSING THE PLATFORM TO

DROP FAST. THE USER SHOULD GUIDE

THE LOWERING OF THE PLATFORM

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 4 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

27-5/8” from

floor

Crossbar

Mounting Holes

are 16” on Center

19” from

floor

AC Power

Supply Plug

INSTALLATION (Cont’d)

STEP 3: To mount the SR7005iWall Mount In-Room Mini Platform Scale you can use either:

The wall mount bracket supplied with the scale (Figure 1) or

Use the two crossbar mounting holes on the crossbar which are located 16” apart (Figure 2).

USING THE WALL MOUNTING BRACKET

STEP (a): For stud walls, use a stud finder and locate any studs in the mounting area.

STEP (b): Measure up from the floor 27-5/8” and make a mark at a stud location. This will be the location

of bottom edge of the wall mounting bracket (Figure 2). Level the wall bracket and mark all three screw

locations.

For concrete walls, measure up from the floor 27-5/8” and make a mark, Level the wall bracket and mark

all three screw locations.

STEP (c): For wall mounting locations without a stud, use a screwdriver to drive the provided self-drilling

wall anchors into the wall. It is not recommended to use a power drill to set the wall anchors.

For concrete wall mounting, install appropriate wall anchors at all marked screw locations.

Figure 1: Wall Bracket

Figure 2: Wall Bracket Installation

WARNING

THE WALL BRACKET OR CROSSBAR

MUST BE SECURELY ANCHORED TO THE

WALL USING APPROPRIATE HARDWARE

Continued next page

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 5 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

INSTALLATION (Cont’d)

STEP (d): Mount the wall bracket to the wall by using the provided #8 x 1-1/2” Phillips flat head screws

into the self-drilling wall anchors or using customer supplied appropriate flat head screws long enough to

anchor into a wall stud or the concrete anchors.

STEP (e): After the wall bracket is securely fastened to the wall, carefully lift the SR7005i scale and place

it onto the wall mounting bracket. Proceed to Step 4.

USING THE CROSSBAR MOUNTING HOLES

STEP (a): Place the scale against the wall and carefully lower the platform. Make a mark at a stud location

for the two holes 16” apart (Figure 2).

For concrete walls, follow the same procedure, marking the two hole locations.

STEP (b): For stud wall mounting locations without a stud, use a screwdriver to drive the provided self-

drilling wall anchors into the wall. It is not recommended to use a power drill to set the wall anchors.

For concrete wall mounting, install appropriate wall anchors at all marked screw locations.

STEP (c): Attach the crossbar to the wall by using the provided #8 x 1-1/2” Phillips flat head screws into

the self-drilling wall anchors or using customer supplied appropriate flat head screws long enough to

anchor into a wall studs or the concrete anchors.

STEP 4: Plug in the AC power supply and/or remove the battery cover and remove the plastic battery strip

to activate the six (6) “C” cell batteries. Reattach the battery cover.

MICROBAN ANTIMICROBIAL PROTECTION

Microban® antimicrobial technology has been added to help reduce the growth of bacteria as part of a

medical center's approach to creating a cleaner healthcare environment. For more information, visit

https://www.microban.com/sr-scales

IMPORTANT

THE WALL BRACKET IS INTENDED TO KEEP THE SCALE

FROM PULLING OFF OF THE WALL. ENSURE THAT THE

ENTIRE WEIGHT OF THE SCALE IS ON THE FLOOR AND

NOT ON THE WALL BRACKET.

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 6 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

SYSTEM DESCRIPTION and INTENDED USE

SYSTEM DESCRIPTION

The SR7005iWall Mount In-Room Mini Platform Scale system employs the latest in microprocessor and

load cell technology to provide accurate and repeatable weight data. Four (4) identically matched

transducers are strategically placed to ensure an accurate representation of the patient’s weight.

The SR7005ilow power microprocessor circuitry is powered by six (6) alkaline “C” cell batteries that will

provide up to 6,500 weight readings before needing replacement.

The patient’s weight is displayed on a 16-character dot matrix LCD w/LED backlight. The weight data may

be viewed either in pounds or kilograms with a displayed resolution of 0.1 for each.

The SR7005iWall Mount In-Room Mini Platform Scale system has an 18” x 20” (45.8 cm x 50.8 cm)

platform weighing surface.

The scale system has a programmable Automatic Power Down (APD) for adjusting the scale on-time.

INTENDED USE:

The SR7005iWall Mount In-Room Mini Platform Scale system is specifically designed for in-room

weighing of patients and is a preferred means of gathering patient weight data of up to 660 lb or 300 kg.

Platform should be stored in the upright position when not in use to prevent a trip and fall hazard.

WARNING

THE COUNTER BALANCE DAMPER

ASSISTS THE END USER WHEN LOWERING

THE PLATFORM. THE END USER NEEDS TO

CONTROL THE RAISING AND LOWERING

OF THE PLATFORM.

WARNING

DO NOT EXCEED

MAXIMUM WEIGHT LIMIT OF

660 LB / 300 KG

WARNING

DEVICE COULD BE A TRIP AND

FALL HAZARD IF PLATFORM IS

LEFT IN THE DOWN POSITION

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 7 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

CLEANING and DISINFECTING

CLEANING

To clean the display / user interface and other scale contact areas:

Use a soft cloth dampened with water and mild detergent to clean scale surfaces.

Wipe surface with clean soft cloth dampened with water and then dry with clean soft cloth.

Do not use abrasive materials to clean scale surface to prevent damage to the surface

finish.

Do not spray liquid directly onto scale surfaces. Use only a damp cloth.

DISINFECTION

To disinfect the display / user interface and other scale contact areas:

Use a soft cloth dampened with disinfectant or a damp disposable disinfectant cloth. Cloth

cannot be dripping wet. Follow manufacturer’s instruction on the proper use of

commercially available disinfectants.

Disinfectant solutions with 1% sodium hypochlorite or 70% isopropyl alcohol are suitable

for display / user interface and other scale contact surfaces.

After disinfecting, use a soft cloth dampened with clean water and dry with a soft clean

cloth to prevent buildup of material on scale finish.

Do not use abrasive material to disinfect / clean scale surfaces to prevent damage to the

surface finish.

Do not spray liquid directly onto scale surfaces. Use only a damp cloth.

WARNING: DO NOT SPRAY CLEANING SOLUTION OR LIQUIDS DIRECTLY

ON SURFACES TO BE CLEANED.

WARNING: EXPOSURE TO EXCESSIVE LIQUID WILL DAMAGE USER

INTERFACE KEYPAD.

WARNING: DO NOT USE PRESSURIZED WATER OR STEAM. THE SCALE

SYSTEM CONTAINS ELECTRONIC COMPONENTS THAT MAY BE

ADVERSELY AFFECTED BY EXPOSURE TO SUCH AN

ENVIRONMENT.

STORAGE

Platform should be stored in the upright position when not in use to prevent a trip and fall hazard.

If storing this equipment for periods longer than three (3) months, remove the batteries and store in the

upright position to prevent damage to the hydraulic cylinders. To maintain proper operation of this

instrumentation, storage and transport conditions should not vary outside the following conditions:

Relative Humidity 0% to 85%, Ambient Temperature 14F to 122F (-10C to +50C).

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 8 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

SPECIFICATIONS

MAXIMUM WEIGHT CAPACITY

660 lb (300 kg)

PLATFORM SIZE

18 in x 20 in (45.8 cm x 50.8 cm)

DISPLAY TYPE

16-Character Dot-Matrix LCD

DISPLAY RESOLUTION

0.1 lb / 0.1 kg

ACCURACY

0.1% +/- 1 digit of displayed resolution for calibrated range

AUTO ZERO

Auto Zero when platform is first put down. One button

operation after platform is left down

AUTO POWER DOWN

Adjustable between 30 to 300 seconds

AVERAGING

Automatic digital filter

POWER SUPPLY

Six (6) “C” cell batteries, Replace battery indicator on Display

Medical grade AC power supply

CALIBRATION

Calibration is traceable to NIST standards

OPERATING CONDITIONS

Normal operating conditions for this product:

Ambient Temperature Range: 68F to 85F (20C to 30C)

Relative Humidity Range: 0%-85%

Avoid exposure to high-pressure water or steam

TRANSPORTATION and

STORAGE

Platform should be stored in the upright position when not in

use to prevent a trip and fall hazard.

Storage and transportation conditions should not vary outside

the following conditions:

Ambient Temperature 14F to 122F (-10C to +50C).

Relative Humidity 0% to 85%,

Store in the upright position and remove batteries if storing

longer than three (3) months

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 9 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

BUTTON FUNCTIONS

WEIGH Press and hold to zero scale. Button is used to zero the system before placing the patient on the

scale. Ensure that nothing is in contact with the weighing surface during this procedure.

SEND (PRINTER)

Press to send stored values to printer. Output values include time, date, and weight. If BMI was

calculated, BMI and height will be included in the output values.

RECALLPress to recall the last stored weight. The stored weight will be erased when the scale is zeroed

or another stable weight is stored.

BMI

Press to calculate BMI. When the “BMI” is pressed, the default value “HT = 65 in” or “HT =

165 cm” is displayed. If there is no stored stable weight, the display will indicate “NO

WEIGHT DATA” and then go back to the weigh screen “WT = 0.0 Lb”.

MENU Press Menu to toggle through the menu options.

Setting the UNITS: Use UP or DOWN arrow buttons to select “Lb/ in” or “Kg/ cm”. Press

ENTER to save changes.

Setting ON TIME: Use UP or DOWN arrow buttons to adjust the “ON TIME”. The “ON

TIME” may be set from 30 to 300 seconds in 30 second increments. Press ENTER to save

changes.

Setting TIME and DATE: Use the UP arrow button to select digit. To change digit use the

DOWN arrow button. Press ENTER to save changes.

NOTE: When selected, the year position defaults to “00”

Figure 3: Button Display

Continued next page

Model SR7005iWall Mount In-Room Mini Scale

Operating and Service Manual

Part No. MAN7005i_200520 Page 10 of 16

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

BUTTON FUNCTIONS (Cont’d)

ENTER Press to save change in digits for calibration, for unit’s set-up, for time and date set-up and

saving completed calibration data.

UP / SELECT

Press UP to adjust height up from the default for BMI calculation, to increase the scale’s “on

time” or to select a digit when setting time and date.

DOWN / CHANGE

Press DOWN to adjust the height down from the default for BMI calculation, to decrease the

scale’s “on time”, or to change the value of a selected digit when setting time and date.

BASIC SYSTEM OPERATION

SETTING SYSTEM ZERO

Scale will auto-zero when the platform is first lowered. Make sure the scale is free and clear of any

obstructions. When platform is left down, press and hold the ZERO / WEIGH button. The displayed

message will indicate “HOLD TO ZERO”and count down to zero. Release the button when

display message indicates “HANDS OFF”. Make sure that nothing is in contact with the scale while

zeroing the system. In a few seconds, the display will read “WT = 0.0 Lb”(or 0.0 Kg).

WEIGHING

Position the patient on the scale. The weight stable indicator “” flashes on the display. When the

weight is stable, the weight stable indicator remains solid. The display will indicate the patient’s

weight in either pounds or kilograms; example: “WT = 123.5 Lb”. The stable weight is auto

stored in memory.

RECALLING LAST STORED WEIGHT

Press to recall last stored weight. The stored weight will be erased when the scale is zeroed or

another stable weight is stored.

Inhaltsverzeichnis

Andere SR Instruments Skala Handbücher

SR Instruments

SR Instruments SR Scales SRV713 Service-Handbuch

SR Instruments

SR Instruments SR Scales SR7005i-KG Service-Handbuch

SR Instruments

SR Instruments SR Scales SRV945-BT Service-Handbuch

SR Instruments

SR Instruments SR Scales SR7010i Service-Handbuch

SR Instruments

SR Instruments SR Scales SR241KG Service-Handbuch

SR Instruments

SR Instruments SRScales SRV713W Service-Handbuch

SR Instruments

SR Instruments SRScales SRV947R-BT Service-Handbuch

SR Instruments

SR Instruments SRScales SRV945 Service-Handbuch

SR Instruments

SR Instruments SR Scales SRV957IFS Service-Handbuch

SR Instruments

SR Instruments SRScales SRV947R Service-Handbuch

SR Instruments

SR Instruments SRV710W Series Service-Handbuch

SR Instruments

SR Instruments SRScales SR7000i Service-Handbuch

SR Instruments

SR Instruments SRScales SR465 Bedienungsanleitung

SR Instruments

SR Instruments SR755KG Service-Handbuch

SR Instruments

SR Instruments SRV710W Series Service-Handbuch

SR Instruments

SR Instruments SR Scales SRV712W-2 Service-Handbuch

SR Instruments

SR Instruments SR Scales SRV415 Service-Handbuch

SR Instruments

SR Instruments SR Scales SRV930 Service-Handbuch

SR Instruments

SR Instruments SRScales SRV716W Series Service-Handbuch

SR Instruments

SR Instruments SR Scales SR 735i Service-Handbuch

SR Instruments

SR Instruments SR Scales SR463iR-PH Series Service-Handbuch

SR Instruments

SR Instruments SR Scales SR615i Service-Handbuch

SR Instruments

SR Instruments SR Scales SR555i-KG Service-Handbuch

SR Instruments

SR Instruments SR Scales SR463iR-PH Series Service-Handbuch

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung