SSG T6 Bedienungsanleitung

User Manual

Ver.2015

Security alarm system

Control panel layout -----------------------------------------------------------

Power on -------------------------------------------------------------------------

Connect PSTN Land Line ---------------------------------------------------------

Insert a SIM Card -----------------------------------------------------------------

Control Panel Operation --------------------------------------------------------

Alarm Control -----------------------------------------------------------------

Access Control System------------------------------------------------------------

Make Phone Calls------------------------------------------------------------------

Function Setting

---------------------------------------------------------------------

Table of Contents

01~02

05~08

05~06

Voice memo ------------------------------------------------------------------

Maintenance --------------------------------------------------------------------------

FAQ ----------------------------------------------------------------------------------

Speciﬁcations --------------------------------------------------------------------

Disclaimer-----------------------------------------------------------------------------

42~43

Accessories

----------------------------------------------------------

Remote control----------------------------------------------------------------

Door/Window Contact -------------------------------------------------------

PIR motion sensor

---------------------------------------------------------

RFID tag ----------------------------------------------------------------------------

28~39

28~29

30~31

32~38

SMS Operation-------------------------------------------------------------------

23~25

Settings --------------------------------------------------------------------------

Alarm Phone Number setting

------------------------------------------------------

Add/Delete Accessories

----------------------------------------------------

System Settings ---------------------------------------------------------------

History -----------------------------------------------------------------------------

28~39

11~14

15~22

LCD Display Menu ---------------------------------------------------------------09~10

Preparation before Use ---------------------------------------------------------

03~04

APP Operation-------------------------------------------------------------------26~27

Additional siren -------------------------------------------------------------------39

The system consists of a master control panel and various wire/wireless

sensors,once any unusual is detected,the alarm control panel will hoot

on-site ,meanwhile, it will send SMS to or call the preset phone numbers.

complete wireless design makes it easy to setup and install,it is widely used

in residential, commercial,industrial,personal protection, and militar y

properties.

System overview

Main features

GSM+PSTN dual network communicator based,more reliable

100% wireless ,easy to setup and install

Stylish design with touch keypad and LCD display

Support 30 remote controls, 99 wireless sensors, and 99 RFID tags

Can store 5 alarm phone numbers,5 SMS alert phone numbers, 2 CSM

numbers and speed dial number

Support 10s voice message recording and replay,even you can leave a

voice message from phone remotely.

Support RFID tags to disarm and unlock the electronic lock

Support maximum 150 alarm event logs

One group of timing arm and disarm

Support exit & entry delay

With password protection

4 types of zone for optional:Normal,Home,24 hours,Delay

All zones and RFID tags can be renamed

Remote control or setting by SMS,phone call and APP(iOS and Android)

SMS alert for power failure/recovery and low battery

Two-way communication to talk and hear through built-in speaker and

MIC

Nine optional display languages: English, France, German,Spanish,

Finland, Swedish, Norwegian, Danish, Italian

10 optional languages for SMS notiﬁcation and APP:

English, France, German,Spanish, Finland, Swedish, Norwegian,

Danish,Italian,Chinese

Rear Side

Front Side

Control Panel Layout

Tamper Switch

Speaker

Backup Batteries

Power

ON/OFF

Landline Jack

MIC

SIM Card Slot

NC Input for

Wired Sensor

(Normal Zone)

Output Wired Siren

(≤500mA)

Output for

Electronic Lock

AC Adapter

Jack

Terminals for

Wired Sensors

0102

RFID Tag Reader /

Play Voice Memo

Home Mode (Part Arm)

Disarm

Arm

Voice Memo Button

LED Indicator

LCD Display

Esc

Up/Down

Enter

SOS

Clear

Call

GSM Network LED

Connect PSTN Land Line

This alarm control panel features a dual communicator of both PSTN and

GSM alarm system, If there is an alarm, it will auto dial preset phone

numbers either though landline or through GSM network .

Insert a SIM Card

Insert a GSM SIM card into the card slot according to the mark and lock it.

This step can be ignored if GSM function is not applied.

Connect the smaller connector of provided telephone cable to the

PSTN land line interface at the back side of the panel.

Connect the other end of the telephone cable to the signal output

provided by PSTN land line operator.

Preparation before Use

0304

Please make sure the GSM SIM card doesn’t require any PIN code,for

more information ,please contact your local carrier.

Note:

1.Plug the AC adapter into a wall outlet

2.Plug the output connector of AC adapter into the adapter Jack of

control panel

3.Turn the power switch to on

Power on

Switch

Branch box

Control panel

Telephone

Power

Control Panel Operation

Alarm Control

Arm (Away Arm)

Press the button on the [Arm ]

control panel, the system enters arm

state when one beep is heard and the

arm LED Indicator lights on.

Emergency Call

When the LCD display is activated,

Hold the button for 3 seconds [ ]

the system goes into emergent

alarming state with siren hooting,

meanwhile the panel will auto dial

pre-stored alarm phone numbers

Home Mode (Part Arm)

Press the button on [Home Mode ]

the control panel, the system enters

home mode when one beep is hear

and the home mode LED Indicator

lights on. All the normal sensor are

armed except the home mode sensors

which are disarmed, so that user can

move freely at home.

Disarm

Input user code (Default: 1234) or

admin code (Default: 123456) ﬁrst

then press the button, [Disarm ]

the system enters disarm state when

one beep is heard and the disarm

LED Indicator lights on.

Note: If Entry/Exit Delay is activated, all

zones except the 24-hour zone will enter

arm state after the set delay time.

0506

The control panel has a RFID reader for

unlocking the electronic door lock by disarming

the system. Just place the RFID tag close to the

RFID reader, the blue LED indicator ﬂashes

once.

The system is disarmed and the electronic door

lock is opened (If connected).

Access Control System

If you input wrong numbers, press button and input again. Press button to

[Esc] [Esc]

cancel dialing or press button to end a conversation.[Call ]

Function Setting

Input the admin code (Default: 123456), and then press to enter setting menu. [Enter]

Down

Enter Conﬁrm

Back to last step Esc

Note: If control panel is connected with extension line, 0# or 9# need to be added in front of

the phone number when making phone calls. if the land line is unavailable, system will switch

to GSM network, user can make phone calls by inputting phone number directly without 0# or

9#.

0708

When the control panel is in disarm or home mode state, press button,

Type the phone number you wish to call and press .

[Call ]

Make Phone Calls

The control panel has a built-in communication module. If the PSTN land line is

connected or SIM card is connected properly, and the credit is enough, you can use

the panel to make calls.

(a)Through SIM card

(b)Through landline

When the control panel is in disarm or home mode state, press button,

Type the phone number you wish to call and press button. [Enter]

[Call ]

Voice Memo

Press the button for 1 second to record 10 seconds voice [Record Voice Memo ]

message. The circle Play Voice Memo will be ﬂashing to remind you. Users can touch

the center of circle to listen to the voice memo. The LED indicator blacks out when the

voice memo has been played. Replay by touching it again.The latest voice memo will

cover the former message.

09 10

In the table below,each colummn represents a menu or a sub menu,Each

menu or submebu will be displayed on on of the two lines of LCD display.On

the LCD display,the current menu,submenu or setting is shown on the line

at the bittom,while the previous menu or sub menu is shown on the line at

the top.

Navigate the select the setting you wish to modify with the keys" " or" ",

and enter each menu or sub menu by pressing " "button.Enter

How to use the touch keypad

:Delete

:Down

:Up

:Conﬁrm/select

:Back/Cancel

Main Menu Sub menu 1 Sub menu 2 Sub menu 3

Phone numbers

Accessories

Remote

Add a new

Delete all?

Delete one

*Please connect within 30s

1=YES 0=NO

Enter 01-30

RFID Tag

Add a new

Delete all?

Delete one

*Please connect within 30s

1=YES 0=NO

Enter 01-99

Wireless sensors

Add a new

Delete all?

Delete one

*Please connect within 30s

1=YES 0=NO

Enter 01-99

Test mode

System settings

Date and Time 20xx-xx-xx xx:xx

Entry Exit delay Entry delay

Exit delay

* 0-300s

Auto arm/disarm

Auto arm time 00:00

Auto disarm time

On or Off

00:00

Control by phone On or Off

Line cut alarm On or Off

Keypad tones On or Off

GSM fail tip On or Off

System settings

Main Menu Sub menu 1 Sub menu 2 Sub menu 3

Access code

Admin code

User code

Duress code

Open door code

6 digits:123456

4 digits:1234

4 digits:0000

4 digits:8888

Ring time 0-9

Wired siren

Siren alert time

Built-in siren

Wireless siren

Siren setup

ON or OFF

0-9 min

ON or OFF

User ID 4 digits

Arm Upload ON/OFF

Disarm Upload ON/OFF

Call recycle 0-9

Backlight time 0-300s

Reset 1=Yes 0=NO

About

Language

English,French

German,Spanish

Finnish,Swedish

Norwegian,Danish

Tialian,Chinese

History

- -

1-150

Phone [1-5] is

SMS Num [1-5] is

CMS Num [1-2] is

Speed dial Num

11 12

(1)Add/delete remote&keypad

Add

a)Log on setting menu, , choose “Accessories”, press

[Enter].

b) , choose “Remote”, press .[Enter]

c) , choose “Add a new”, press .[Enter]

d)Press any button on the remote control within 30s,the control panel will

sound a beep,and the LCD will show “ ”.if the remote Add OK,Remote 01-30

already has been added before,the control panel will sound 2 beeps and

the LCD will show “ ”already exists

* When you add more remote control ,the remote control number will add 1

automatically from 01 to 30.

Delete

Delete a remote control &keypad

[Enter]a)Log on setting menu, ,choose “Accessories”, press .

b) , choose “Remote”, press . [Enter]

c) , choose “Delete one”, press .[Enter]

d)Enter the remote control number(01-30) you want to delete ,the control

panel will sound a beep if delete succeeded.

Delete all remote control&keypad

[Enter]a)Log on setting menu, ,choose “Accessories”, press .

b) , choose “Remote”, press .[Enter]

c) , choose “Delete all”, press .[Enter]

d)Enter “1” delete all the added remote control ,the control panel will sound

a beep if delete succeeded.

(2).Add/delete RFID tag

Add

b)Log on setting menu, ,choose “Accessories”, press .[Enter]

b) , choose “RFID tag”, press . [Enter]

c) , choose “Add a new”, press .[Enter]

d)Swipe the RFID tad on the RFID reader within 30s,the control panel will

sound a beep, and the LCD will show “ , RFID tag 01-50”.if the RFID Add OK

tag already has been added before ,the control panel will sound 2 beeps

and the LCD will show “ s”already exist

*When you add more RFID tags ,the RFID tag number will add 1

automatically from 01 to 50.

1. Alarm Phone Number Setting

2. Add/delete accessories

Before enter into setting menu,please disarm the system ﬁrst.

Type the Admin password and then press “Enter” button on the control

panel to enter into setting menu.

Settings

Important: The default language of this alarm system is English, you can change in the

[Language] [System Setting] menu of .

User can store 5 alarm phone numbers 5 SMS alert phone numbers and 2

CMS numbers.

Add phone number

a)Log on setting menu,press ,choose “Phone Numbers”,

press .[Enter]

b) ,choose the group of phone number you want to

add, press .[Enter]

c)Input alarm phone numbers, press to save. [Enter]

Delete phone number

[Enter]a)Log on setting menu, choose “Phone Numbers”, press .

b) , choose the group of phone number you want to

delete, press .[Enter]

c)Press to delete, press to conﬁrm.* [Enter]

or [ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

13 14

(3)Add/delete wireless sensors

Add

a)Log on setting menu, ,choose “Accessories”, press .[Enter]

b) , choose “wireless sensor ”, press .[Enter]

c) , choose “Add a new”, press .[Enter]

d) , choose the type of sensor(Normal sensor/home

sensor/delay sensor/24 hour sensor [Enter) , press ].

e)Activate the wireless sensor within 30s,the control panel will sound a

beep ,and the LCD will show “ ”.if the wireless sensor Add OK,RFID tag 01-50

already has been added before ,the control panel will sound 2 beeps and

the LCD will show “already exists”

What is Normal Sensor/Home sensor/24 hour sensor/Delay sensor?

Normal Sensor: In arm mode, when normal sensors are triggered, system

will alarm. In disarm mode, when normal sensors are triggered, system will

not alarm.

Home Sensor: In home mode, only normal sensors will be triggered and

home sensors will not be triggered while alarming ,this will allow user to

move freely at home.

Delete

Delete a RFID tag

a)Log on setting menu, ,choose “Accessories”,press r].[Ente

b) , choose “RFID tag”, press . [Enter]

c) , choose “Delete one”, press .[Enter]

d)Enter the remote control number(01-50) you want to delete.the control

panel will sound a beep if delete succeeded.

Delete all remote control&keypad

a)Log on setting menu, choose “Accessories”, press [Enter].

b) , choose “RFID tag”, press . [Enter]

c) , choose “Delete all”, press .[Enter]

d)Enter “1” delete all the added RFID tag,the control panel will sound a

beep if delete succeeded.

(4).Test mode

Test mode enables you to check whether the remote/RFID tag/wireless

sensor has been added successfully.

a)Log on setting menu, ,choose “Accessories”, press .[Enter]

b) , choose “test mode”, press .[Enter]

c)Trigger the accessories you have added before,

24 Hour Sensor : Regardless the system is armed or disarmed, when 24 hour

sensors are triggered, system will alarm at once.

Delay Sensor : In arm mode, when delay sensors are triggered, system will

alarm after the entry delay time you have set. (please refer to the Entry

delay instruction on page 32).

*When you add more wireless sensors ,the wireless sensor number will add

1 automatically from 01 to 50.

Delete

Delete a wireless sensor

a)Log on setting menu, ,choose “Accessories”,press . [Enter]

b) , choose “wireless sensor ”, press ].[Enter

c) , choose “Delete one”, press .[Enter]

d)Enter the wireless sensor number(01-50) you want to delete .the control

panel will sound a beep if delete succeeded.

Delete all wireless sensors

b)Log on setting menu, ,choose “Accessories”, press . [Enter]

b) , choose “wireless sensor ”, press .[Enter]

c) , choose “Delete all”, press . [Enter]

d)Enter “1” delete all the added wireless sensor ,the control panel will

sound a beep if delete succeeded.

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

15 16

(1)Date and Time

a)Log on setting menu, ,choose “System setting”, press

[Enter].

b) , choose “Date and Time”, press ]. [Enter

c) to move the pointer ,input current date and time,

press to save. [Enter]

(2)Entry/Exit delay

Entry delay

Entry delay gives you time to disarm the system upon entr y, before an

alarm

occurs. only the delay sensors are invalid, the non delay sensors will be

triggered normally.

Log on the menu, , choose “System Settings”, press

.[Enter]

a) , choose “Entry Exit Delay”, press . [Enter]

b) , choose “Entry Delay”, press . [Enter]

c)Input time for entry delay; press to save. [Enter]

Exit delay

Exit delay gives you time to exit after arming.

a)Log on the menu, , choose “System Settings”, press

.[Enter]

b) , choose “Entry Exit Delay”, press .[Enter]

c) , choose “Exit Delay”, press . [Enter]

d)Input time for exit delay; press to save.[Enter]

*Entry/exit delay time is calculated in seconds; default is 0 second (off); the

range is 0-300 seconds.

(3)Auto Arm/Disarm

You can set up the system to arm/disarm automatically at a deﬁned time

ever y day.

3.System settings Timing to Arm

a)Log on the menu, , choose “System Settings”, press

.[Enter]

b) , choose “Auto Arm/Disarm”, press .[Enter]

c) , choose “Auto Arm Time”, press .[Enter]

d)Input exact time for arming; press . [Enter]

Timing to disarm

a)log on the menu, , choose “System Settings”, press

to conﬁrm.[Enter]

b) , choose “Auto Arm/Disarm”, press .[Enter]

c) , choose “Auto Disarm Time”, press . [Enter]

d)Input exact time for disarming; press .[Enter]

(4)Control by phone call

Method 1

When an alarm is triggered ,the control panel will dial the stored phone

numbers ,after picked up ,you can follow the voice promotion to remote

control the panel

Method 2

a) Dial the telephone number of control panel ,either the number of SIM

card in the control panel or the number of landline to which the control

panel is connected, after got through ,the voice promotion will guide you

to enter access code.

b) Enter access code(user code),press " " to conﬁrm.#

c) Follow the voice promotion to remote control the panel.

Remote Phone Control Instruction Table

Phone

Buttons Function Explanation

Press [ ]

Arm the system

Disarm the system

Monitor on site

Turn on siren

Turn off siren

Arm succeed

Disarm succeed

Press [*] to prolong monitor time

Deter the intruders

Siren stops ringing

Press [ ]

To exit Remote Phone Control Or hang up the phone

press or [ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

press or

[ ] [ ]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung