ST-Lab C-440 Bedienungsanleitung
eSATA/USB 1-Port ExpressCard
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.
MN7000000065 Page2
Features and Benefits
General
Fully compliant with ExpressCard Specification 1.0
ExpressCard/34 Form Factor Module
Works with various brands of SATA or USB 2.0 devices
Hot-swapping feature allows to connect or disconnect devices
without powering down system
Support Windows® 2000, XP/2003/Vista (32-bit and 64-bit)
SATA
Serial ATA generation 2 transfer rate of 3.0Gbps
Support SATA II NCQ (Native Command Queuing) to maximize
system performance
Supports hot plug for external Serial ATA port
USB
Fully supports EHCI and OHCI Compliant standards
Compliant with Universal Serial Bus specification revision 2.0
Supports USB 2.0 and USB 1.1 devices
Supports data transfer rates of high-speed (480Mbps), full-speed
(12Mbps), and low-speed (1.5Mbps)
MN7000000065 Page3
System Requirements
Windows® 2000, XP/2003/Vista (32-bit and 64-bit)
ExpressCard-enabled system with an available ExpressCard slot
Package Contents
1 x eSATA/USB 1-Port ExpressCard
1 x Driver CD
1 x User Manual
Hardware Installation
General instructions for installing the card are provided below. Since
the design of system may vary, refer to your system’s reference manual
for further information, if needed.
Insert the Card into the ExpressCard slot of your system. Make sure it
is inserted all the way in for a solid connection.
Driver Installation
1. Please insert the CD driver bound with eSATA/USB 1-Port
ExpressCard into your CD-ROM Drive.
2. At the Windows desktop, click Start, Run.
3. Type D:\ExpressCard\SiI3531\Setup.exe, click OK.
(Change D: to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the installation.
To Verify Driver Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Look for the following:
Windows® 2000/XP/2003: Double click SCSI and RAID
Controller:
-Silicon Image SiI 3531 SATA Controller should be displayed
Windows® Vista: Double click Storage controllers:
-Silicon Image SiI 3531 SATA Controller should be displayed
Inhaltsverzeichnis
Andere ST-Lab Computerhardware Handbücher
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
