Stûv UM Bedienungsanleitung

0512

[en]

FOR INSTALLATION ENGINEERS

Installation instructions

Ready-to-ﬁt ﬁreplace for Stûv µM

2Stûv microMega – installation of ready-to-fit cladding - 0512

Contents

This cladding has been designed to

ensure maximum convenience and

safety. It has been manufactured

with the greatest of care. If however

you should find the slightest

dissatisfaction with it, please contact

your supplier.

We recommend that you read these

instructions prior to installation.

Some configurations might have an

impact on the sequence of operations

to be performed.

PRESENTATION OF THE PRODUCT 3

Dimensions 3

Recommendations 3

Overview 4

PREPARATION OF THE AREA 5

Tools 5

Preparation of the stove 5

Screws required 6

INSTALLATION 7

Removal of the door 7

Assembly of the body part for the ready-to-fit fireplace 8

Assembly of the facade 10

MAINTENANCE 14

CONTACTS 15

200 mm

473 mm

203 mm

1370 mm

1275 mm

1992 mm

932 mm

520 mm

392 mm

1290 mm

Stûv microMega – installation of ready-to-fit cladding - 0512

PRESENTATION OF THE PRODUCT

Dimensions

Recommendations

Read the installation instructions and

directions for use before installation

and actual usage.

Also adhere to your stove's directions

for use.

We strongly recommend you entrust

the installation of this Stûv cladding to

a qualified professional.

Once the cladding has been installed,

hand these instructions over to the

user.

Signing the delivery forms signifies

that you accept the product and

acknowledge that the merchandise

is compliant with the merchandise

ordered. It is therefore very important

to check the integrity of the

merchandise on delivery.

Adhere to the maintenance guidelines.

Any modification made to this

cladding may create the risk of

danger. Furthermore, it will also

exempt it from the guarantee cover.

The installation of the stove, its

accessories and surrounding materials

must meet all regulations (local and

national) and all standards (national

and European).

1012

217

Stûv microMega – installation of ready-to-fit cladding - 0512

Overview

8 & 10

TX 20

3 4

Stûv microMega – installation of ready-to-fit cladding - 0512

PREPARATION OF THE AREA

Tools

Préparation du foyer

A micromega Stûv fitted with ready-

to-install cladding can only be

connected to an outside air inlet with

a special duct (diagram 3 & 4).

Preparation of the stove

X 4

X 40

X 4 C

X 8

E F

X 4 X 2

Stûv microMega – installation of ready-to-fit cladding - 0512

Screws required

M6 hexagonal nut grooved washer

52113022

Tork screw DIN 7380 M4X8

52123001

DIN 125A M6 washer

52114003

Adjustable base

52120002

DIN 7504 M4X16 screw

52103007

Guide runner

55997081

Please note.

The "F" guide runner is a bumper.

It is not resistant to high temperatures.

Do not use for any purpose other than

that intended.

7 8

Stûv microMega – installation of ready-to-fit cladding - 0512

INSTALLATION

Removal of the door

The ready-to-fit Stûv cladding is

attached to the micromega without

the door.

Therefore the first step is to remove

the door.

- Ensure the glass door is fully pulled

down.

- Tilt the door.

- Unfasten the counterbalances and

position them so that they rest against

the bottom of the frame.

Once the door is open, it is

recommended to block it in this

position. To do this, screw 2 M6

screws to the base of the lower hinge

part [diagram 5].

217

Stûv microMega – installation of ready-to-fit cladding - 0512

Assembly of the body part for the ready-to-fit fireplace.

567

Stûv microMega – installation of ready-to-fit cladding - 0512

Assembly of the body part for the ready-to-fit fireplace.

Use thermal insulation to cover the

full length of the duct (diagram 7).

1 2

Stûv microMega – installation of ready-to-fit cladding - 0512

Assembly of the façade

The walls of the body structures have

to be uncoupled in order to position

them independently on the stove

(diagram 4).

Please note !

When a façade is installed onto a fitted stove, the management of the hot air inlets and outlets is the responsibility of the

installation engineer.

The installation of the stove, its accessories and the materials that surround it must comply with all regulations (local and

national) and all standards (national and European).

Inhaltsverzeichnis

Andere Stûv Kamin im Innenbereich Handbücher

Stûv

Stûv Stuv 16-IN Series Handbuch

Stûv

Stûv B.60 Benutzerhandbuch

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Stûv uM Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken