ST X-NUCLEO-NFC01A1 Bedienungsanleitung
Chipsmall Limited consists of a professional team with an average of over 10 year of expertise in the distribution
of electronic components. Based in Hongkong, we have already established firm and mutual-benefit business
relationships with customers from,Europe,America and south Asia,supplying obsolete and hard-to-find components
to meet their specific needs.
With the principle of “Quality Parts,Customers Priority,Honest Operation,and Considerate Service”,our business
mainly focus on the distribution of electronic components. Line cards we deal with include
Microchip,ALPS,ROHM,Xilinx,Pulse,ON,Everlight and Freescale. Main products comprise
IC,Modules,Potentiometer,IC Socket,Relay,Connector.Our parts cover such applications as commercial,industrial,
and automotives areas.
We are looking forward to setting up business relationship with you and hope to provide you with the best service
and solution. Let us make a better world for our industry!
Contact us
Tel: +86-755-8981 8866 Fax: +86-755-8427 6832
Email & Skype: [email protected]om Web: www.chipsmall.com
Address: A1208, Overseas Decoration Building, #122 Zhenhua RD., Futian, Shenzhen, China
October 2014 DocID026566 Rev 2 1/9
9
UM1793
User manual
Dynamic NFC tag expansion board based on M24SR
for STM32 Nucleo
Introduction
The X-NUCLEO-NFC01A1 is a demonstration kit to evaluate the features and capabilities of
the M24SR series. It is based on the M24SR64 device. This shield can be plugged on the
Arduino UNO R3 connectors of any STM32 Nucleo board. This module is compatible with
the following STM32 class of microcontrollers: STM32L0, STM32L1, STM32F0, STM32F1,
STM32F3, STM32F4.
The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a
64 Kbit EEPROM memory. It can be operated from:
•an I2C interface
•a 13.56 MHz RFID reader or a NFC phone.
The I2C interface uses a two-wire serial interface, consisting of a bidirectional data line and
a clock line. It behaves as a slave with respect to the I2C protocol.
The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag.
The board is powered through the Arduino UNO R3 connectors. It also includes three LEDs
for general purpose.
The X-NUCLEO-NFC01A1 (MB1163) schematics, BOM, gerber files, drivers and firmware
are available for download on www.st.com.
Figure 1. Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo
069
www.st.com
Description UM1793
2/9 DocID026566 Rev 2
1 Description
The X-NUCLEO-NFC01A1 board contains the M24SR64-Y chip. It is a dynamic NFC/RFID
tag IC. It features a 64 Kbit EEPROM memory, preformatted for NFC transactions, and
which can be protected by a unique and flexible 128-bit password scheme. The memory
bank can be accessed by any of its two interfaces, either from an I2C interface or by a
13.56 MHz passive NFC interface. The I2C interface is a two-wire serial interface, consisting
of a bidirectional data line and a clock line. It behaves as a slave with respect to the I2C
protocol. The NFC interface is based on the ISO/IEC 14443 type A and NFC Forum type 4
tag specifications. Because it is a passive RF interface, it operates when the board is
powered on but also when the board is powered off. Two control pins are also available from
the M24SR64-Y chip, allowing flexible management of the NFC interface.
DocID026566 Rev 2 3/9
UM1793 Features
9
2 Features
Ready-to-use printed circuit board (PCB) including:
•M24SR64-Y dynamic NFC/RFID tag
•31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB
(ANT14)
•Different color LEDs
•Arduino UNO R3 connectors for Nucleo Board.
Hardware and layout description UM1793
4/9 DocID026566 Rev 2
3 Hardware and layout description
The X-NUCLEO-NFC01A1 board contains the M24SR64-Y chip. In addition to basic
functionalities (NFC & I2C) of this dynamic NFC/RFID tag IC, some LEDs driven by MCU
GPIOs can be used for global purpose.
Figure 2. Functional block diagram
069;DQWHQQDORRS,&OLQN*325)GLVDEOH,QWHUUXSW1XFOHRSRZHUVXSSO\065$UGXLQRFRQQHFWRU$UGXLQRFRQQHFWRU$UGXLQRFRQQHFWRU$UGXLQRFRQQHFWRU
DocID026566 Rev 2 5/9
UM1793 Hardware and layout description
9
3.1 X-NUCLEO-NFC01A1 assembly drawing.
Figure 3. Top assembly view
3.2 X-NUCLEO-NFC01A1 board powering and startup
Proceed as follow:
1. Plug the X-NUCLEO-NFC01A1 on a Nucleo STM32 board
2. Connect the Nucleo board to a PC via the Type A / mini B USB cable
3. Download firmware in STM32 microcontroller
4. The demonstration kit is ready to be used
069[PPDQWHQQD*HQHUDOSXUSRVH/('V$UGXLQRFRQQHFWRUV065
Electrical schematics UM1793
6/9 DocID026566 Rev 2
4 Electrical schematics
Figure 4. Electrical schematics
065B6'$065B6&/065B5)B',6$%/(*1'*1'*1'065B*32Q)&S)&/)&/('5/('N5/('5N5N5N5N55)GLVDEOH$&$&9666'$6&/*329&&8065<0171&&$&$&$QWHQQD$$$$$$'''''''''''''065B*32065B5)B',6$%/(065B6&/065B6'$'''0&8
0&8B/('0&8B/('0&8B/('3$3%3%3%3%3$3$3$3%3%3$3$3$3%3&3$1&,25()5(6(799*1'*1'9,13$3$3$3%3&3&0&8B/('0&8B/('0&8B/('&1+HDGHU;B)HPDOH&1+HDGHU;B)HPDOH&1+HDGHU;B)HPDOH&1+HDGHU;B)HPDOH995
95S)&1&&S)&1&&*1'*1'
DocID026566 Rev 2 7/9
UM1793 An overview of FCC regulations
9
5 An overview of FCC regulations
5.1 Part 15.105
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference's by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
5.2 Part 15.21
Any changes or modifications to this equipment not expressly approved by
STMicroelectronics may cause, harmful interference and void the FCC authorization to
operate this equipment.
Revision history UM1793
8/9 DocID026566 Rev 2
6 Revision history
Table 1. Document revision history
Date Revision Changes
19-Jun-2014 1 Initial release.
31-Oct-2014 2
Updated Figure 1: Dynamic NFC tag expansion board
based on M24SR for STM32 Nucleo.
Updated Figure 3: Top assembly view.
Updated Figure 4: Electrical schematics.
Added Section 5: An overview of FCC regulations.
DocID026566 Rev 2 9/9
UM1793
9
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2014 STMicroelectronics – All rights reserved
Inhaltsverzeichnis
Andere ST Computerhardware Handbücher
ST
ST X-NUCLEO-IHM07M1 Bedienungsanleitung
ST
ST B-U585I-IOT02A Bedienungsanleitung
ST
ST X-NUCLEO-IHM02A1 Bedienungsanleitung
ST
ST STEVAL-ST25R3916B Bedienungsanleitung
ST
ST X-NUCLEO-OUT10A1 Bedienungsanleitung
ST
ST X-NUCLEO-OUT17A1 Bedienungsanleitung
ST
ST QFN20 Bedienungsanleitung
ST
ST ST7LITEUS2 Bedienungsanleitung
ST
ST STSW-L9961BMS Bedienungsanleitung
ST
ST STM32F4 Series Betriebsanleitung
ST
ST Nomadik NHK-15 Bedienungsanleitung
ST
ST FP-ATR-BLE1 Bedienungsanleitung
ST
ST X-NUCLEO-53L4A2 Bedienungsanleitung
ST
ST ST7-EMU3 Series Bedienungsanleitung
ST
ST X-NUCLEO-GNSS2A1 Bedienungsanleitung
ST
ST EVALSPEAr320HMI Bedienungsanleitung
ST
ST STR9 Bedienungsanleitung
ST
ST X-NUCLEO-IHM02A1 Bedienungsanleitung
ST
ST STEVAL-ISF001V1 Bedienungsanleitung
ST
ST UM2082 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
