ST FP-SNS-DATALOG2 Bedienungsanleitung

Quick Start Guide

STM32Cube function pack for high speed

datalogging and ultrasound processing

(FP-SNS-DATALOG2)

Version 2.0 –Sep ’23

Agenda

1Hardware and Software overview

3Documents & Related Resources

2Setup & Demo Examples

1 - Hardware and Software overview

STEVAL-STWINBX1

STWIN.box development kit - STEVAL-STWINBX1

Hardware Overview

STWIN.box - SensorTile Wireless Industrial Node

The STWIN.box (STEVAL-STWINBX1) is a development kit and reference design that simplifies prototyping and testing

of advanced industrial sensing applications in IoT contexts such as condition monitoring and predictive maintenance.

It is an evolution of the original STWIN kit (STEVAL-STWINKT1B) and features a higher mechanical accuracy in the

measurement of vibrations, an improved robustness, an updated BoM to reflect the latest and best-in-class MCU and

industrial sensors, and an easy-to-use interface for external add-ons.

The STWIN.box kit consists of an STWIN.box core system, a 480mAh LiPo battery, an adapter for the ST-LINK

debugger (STEVAL-MKIGIBV4), a plastic case, an adapter board for DIL 24 sensors and a flexible cable.

Key Features

•Multi-sensing wireless platform for vibration monitoring and ultrasound detection

•Built around STWIN.box core system board with processing, sensing, connectivity, and expansion capabilities

•Ultra-low power Arm® Cortex®-M33 with FPU and TrustZone at 160 MHz, 2048 kBytes Flash memory (STM32U585AI)

•MicroSD card slot for standalone data logging applications

•On-board Bluetooth® low energy v5.0 wireless technology (BlueNRG-M2), Wi-Fi (EMW3080) and NFC (ST25DV04K)

•Wide range of industrial IoT sensors: Ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor (IIS3DWB),

3D accelerometer + 3D gyro iNEMO inertial measurement unit (ISM330DHCX) with Machine Learning Core, High-

performance ultra-low-power 3-axis accelerometer for industrial applications (IIS2DLPC), Ultra-low power 3-axis

magnetometer (IIS2MDC), Dual full-scale, 1.26 bar and 4 bar, absolute digital output barometer in full-mold package

(ILPS22QS), Low-voltage, ultra low-power, 0.5°C accuracy I²C/SMBus 3.0 temperature sensor (STTS22H), Industrial grade

digital MEMS microphone (IMP34DT05), Analog MEMS microphone with frequency response up to 80 kHz (IMP23ABSU)

•Expandable via a 34-pin FPC connector

Latest info available at

https://www.st.com/en/evaluation

-tools/steval-stwinbx1.html

Battery

LiPo-752535 - 480mAh

STWIN.box development kit - STEVAL-STWINBX1

Hardware Overview

STWIN.box - SensorTile Wireless Industrial Node

The STEVAL-STWINBX1 development kit includes:

•The STEVAL-STWBXCS1 STWIN.box core system (main board);

•A plastic case with M3 bolts;

•A 480 mAh 3.7 V LiPo battery;

•The STEVAL-MKIGIBV4 ST-LINK adapter with programming cable;

•The STEVAL-C34DIL24 adapter board for DIL24 sensors with the

STEVAL-FLTCB01 flexible cable.

STEVAL-STWBXCS1

STWIN.box Core System

Plastic Case

STEVAL-MKIGIBV4 + Cable

STLINK Adapter (V2, V2.1)

STEVAL-FLTCB01

34 pin Flex cable

STEVAL-C34DIL24

STWIN.box Modular platform expansion - STEVAL-C34KAT1

Hardware Overview

Vibrometer and Temperature Sensors Expansion Board

STWIN.box expansion with Vibrometer (IIS3DWB) and Temperature

(STTS22H) sensors

•Optimal high frequency performance (up to 6kHz)

•Exposed pad on bottom side for thermal coupling

•34-pin slave connector, compatible with STWIN.box and other ST

Evaluation boards

•34-pin flex cable included

•4x fixing holes

STEVAL-C34AT01

STEVAL-FLTCB01

Flex cable

2.5cm

15cm

STWIN.box Modular platform expansion - STEVAL-C34KAT2

Hardware Overview

6 axis + ISPU and Temperature Sensors Expansion Board

STWIN.box expansion with 6 axis + ISPU (ISM330IS) and Temperature

(STTS22H) sensors

•Optimal high frequency performance

•Exposed pad on bottom side for thermal coupling

•34-pin slave connector, compatible with STWIN.box and other ST

Evaluation boards

•34-pin flex cable included

•4x fixing holes

STEVAL-C34AT02

STEVAL-FLTCB01

Flex cable

2.5cm

15cm

STWIN development kit - STEVAL-STWINKT1B

Hardware Overview

STWIN - SensorTile Wireless Industrial Node

The STWIN (STEVAL-STWINKT1B) is a development kit and reference design that simplifies prototyping and testing

of advanced industrial IoT applications such as condition monitoring and predictive maintenance. The kit supports

BLE wireless connectivity through an on-board module and Wi-Fi connectivity through a special plugin expansion

board (STEVAL-STWINWFV1), wired RS485 and USB OTG connectivity.

Key Features

•Multi-sensing wireless platform implementing vibration monitoring and ultrasound detection

•Updated version of STEVAL-STWINKT1, now including STSAFE-A110 populated, BlueNRG-M2S module and

IMP23ABSU MEMS microphone

•Ultra-low-power ARM Cortex-M4 MCU at 120 MHz with FPU, 2048 kbytes Flash memory (STM32L4R9)

•Micro SD Card slot for standalone data logging applications

•Option to implement Authentication and Brand protection secure solution with STSAFE-A110

•Wide range of industrial IoT sensors: ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor

(IIS3DWB), 3D accelerometer + 3D Gyro iNEMO inertial measurement unit (ISM330DHCX) with machine learning core,

ultra-low-power high performance MEMS motion sensor (IIS2DH), ultra-low-power 3-axis magnetometer (IIS2MDC),

digital absolute pressure sensor (LPS22HH), relative humidity and temperature sensor (HTS221), low-voltage digital local

temperature sensor (STTS751), industrial grade digital MEMS microphone (IMP34DT05), analog MEMS microphone with

frequency response up to 80 kHz (IMP23ABSU)

•Modular architecture, expandable via on-board connectors: STMOD+ and 40-pin flex general purpose expansions, 12-pin

male plug for connectivity expansions, 12-pin female plug for sensing expansions

•Other kit components: Li-Po battery 480 mAh, STLINK-V3MINI debugger with programming cable, Plastic box

Latest info available at

www.st.com/stwin

STEVAL-MKBOXPRO

Sensortile.box PRO development kit - STEVAL-MKBOXPRO

Hardware Overview

SensorTile.box PRO discovery box

The STEVAL-MKBOXPRO is the new ready-to-use programmable wireless box kit for developing any IoT application

based on remote data gathering and evaluation.

The SensorTile.box PRO board fits into a small plastic box with a long-life 480mAh rechargeable battery, for the first time

leveraging also on a wireless charger and a programmable NFC tag. The board can be easily connected via Bluetooth to

the ST BLE Sensor app on your smartphone, from which the box kit can be enjoyed in Base and Expert mode. In Pro

mode, professional users can exploit the firmware programming and debugging interface in the STM32 ODE for

developing their firmware from scratch.

Key Features

•All-in-one sensor node in a very small form factor board - Ready-to-go development kit

•Develop apps quickly regardless of your level of expertise:

•Basic mode: wide range of default IoT and wearable applications

•Expert mode: build custom applications leveraging the available algorithms

•Pro mode: develop code in an intuitive way using STM32 open development environment (ODE) and ST function pack

libraries

•ST BLE Sensor app on your smartphone (both on the Android Play Store andiOS App Store) allows you to immediately

connect to the box kit

•Rechargeable long-life battery

•Windows, LINUX, and MacOS ST software compatibility

•Over the Air (OTA) Firmware upgrade

Latest info available at

https://www.st.com/en/evaluation

-tools/steval-mkboxpro.html

B-U585I-IOT02A

Discovery kit for IoT node - B-U585I-IOT02A

Hardware Overview

B-U585I-IOT02A Discovery kit

The B-U585I-IOT02ADiscovery kit provides a complete demonstration and development platform for the STM32U585AI

microcontroller, featuring an Arm® Cortex®-M33 core with Arm® TrustZone® and Armv8-M mainline security extension,

2 Mbytes of Flash memory and 786 Kbytes of SRAM, as well as smart peripheral resources.

This Discovery kit enables a wide diversity of applications by exploiting low-power communication, multiway sensing, and

direct connection to cloud servers.

It includes Wi-Fi® and Bluetooth® modules, as well as microphones, temperature and humidity, magnetometer,

accelerometer and gyroscope, pressure, time-of-flight, and gesture-detection sensors.

Key Features

•Ultra-low-power STM32U585AII6Q microcontroller based on the Arm® Cortex®-M33 core with Arm® TrustZone®, 2 Mbytes

of Flash memory and 786 Kbytes of SRAM, and SMPS in UFBGA169 package

•512-Mbit Quad-SPI Flash memory, 64-Mbit Octo-SPI PSRAM, 256-Kbit I2C EEPROM

•USB FS, Sink and Source power, 2.5 W power capability

•802.11 b/g/n compliant Wi-Fi® module from MXCHIP

•Bluetooth® Low Energy from STMicroelectronics

•MEMS sensors from STMicroelectronics

•2 user LEDs, User and Reset push-button

•On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and

debug port Latest info available at

https://www.st.com/en/evaluation

-tools/b-u585i-iot02a.html

Inhaltsverzeichnis

Andere ST Datenlogger Handbücher

ST HT22IoT Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung