ST STEVAL-LLL011V1 Bedienungsanleitung

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST

ST SPC560B-DIS Bedienungsanleitung

ST

ST SPC584BADPT176S Bedienungsanleitung

ST

ST STM32F407 Series Bedienungsanleitung

ST

ST STM3240G-EVAL Bedienungsanleitung

ST

ST STM3210E-EVAL Bedienungsanleitung

ST

ST STEVAL-PCC008V1 Bedienungsanleitung

ST

ST STEVAL-WBC86TX Bedienungsanleitung

ST

ST STM32G081B-EVAL Bedienungsanleitung

ST

ST BlueNRG-LP Bedienungsanleitung

ST

ST STEVAL-BLUEPIRV1 Bedienungsanleitung

ST

ST STEVAL-IDB011V1 Bedienungsanleitung

ST

ST Contiki6LP Bedienungsanleitung

ST

ST STLink Bedienungsanleitung

ST

ST ARMIC30 Bedienungsanleitung

ST

ST NUCLEO-H745ZI-Q Bedienungsanleitung

ST

ST X-NUCLEO-CCA02M1 Bedienungsanleitung

ST

ST STM3220F-EVAL Bedienungsanleitung

ST

ST SPC560D-DIS Bedienungsanleitung

ST

ST STEVAL-IHM022V1 Bedienungsanleitung

ST

ST STUSB03E Bedienungsanleitung

ST

ST STEVAL-PLC001V1 Bedienungsanleitung

ST

ST PTB801DC Bedienungsanleitung

ST

ST EVAL-L9001 Bedienungsanleitung

ST

ST STEVAL-L99615C Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

STEVAL-LLL011V1 Quick Start

Guide

12 Channel LED driver evaluation board based on LED1202 (for STM32

Nucleo64)

Version 1.2 (Feb 02, 2021)

Hardware overview 2

STEVAL-LLL011V1 Hardware Description

•The STEVAL-LLL011V1 contains 4 LED1202 ICs and 16

RGB LEDs. It can work in standalone mode or together with

the STSW-LED1202GUI PC SW by the onboard USB

connector. Two user buttons allow to interact with the board

by implementing user scripts. Additionally, an external Li-

ION battery can be connected to the board (see the slide 4).

•The PWR button is used to switch on/off:

•A short press to switch the board on

•A long press to switch the board off

•User scripts can be developed and uploaded on the board,

using the SW GUI. Then, the scripts are launched by

pressing the DEMO button. Each time the DEMO button is

pressed, the next script is executed.

Configuration Setup 3

Close this side of JP1

by soldering. Be sure to

have the other side

opened.

JP2 is for GYRO IRQ line

selection.

Connect 5V Power Supply to J3.

Polarity indication is on the

bottom side of the board.

1 2

SWDIO

SWCLK

VDD

RST

GND

GND

VCC

GND

GND

GND

GND

GND

GND

GND

ST-LINK Connection for FW Programming

JTAG CONNECTOR

NAME NUMBER

VCC 1,2

SWDIO 7

SWCLK 9

RST 15

GND 2..20 Even Pins

Battery Option

•The STEVAL can be supplied by using an external Li-ION

battery. Charge current is configured in order to charge a

320mAh battery in about 80 minutes: D2 LED lights when

charging.

4

Close this side of JP1 by

soldering. Be sure to have

the other side opened.

Connect a small Li-ION

battery here.

STSW-LED1202GUI

•The STEVAL-LLL011V1 comes

with a SW PC that gives the user

a total access to the 4 LED drivers

functionalities. For details about

the use of the SW GUI, please

refers to the SW user manual

(UM2747).

5

STEVAL –GUI communication

•Once the STEVAL is supplied:

•Connect the USB cable.

•Press the Power Button (SW4) : the PWR LED lights up (D1).

•If the USB cable has been connected for the first time, please wait that OS

registers and enumerates the new HW, as Virtual COM port.

•Launch the SW GUI.

6

The GUI title will show the SW version, together with

the connection status of the STEVAL board.

STEVAL-LLL011V1 user scripts 7

Instructions on how to develop and

upload the scripts are reported on the

SW user manual (UM2747).

Once uploaded, the scripts are

launched by pressing the SW2 button.

The STEVAL-LLL011V1 can be programmed in order to launch small

user scripts. These scripts are developed inside the SW GUI and then

uploaded on the STEVAL.

Revision History 8

Rev Date Description

1.0 12/07/2019 First Release

1.1 22/10/2019 First Review

1.2 02/12/2021 Added details on board startup