Stamps.com PS2000 Bedienungsanleitung

PS2000 USB 22lb

Internet Enabled Digital Scalewith Thermal Printer

Max: 22lbs d = 0.1oz

3 way power: USB, AC Adapter or Battery

User Manual

Scale Features

Weighing Scale –displays weight in lbs oz and gram

Counting Scale –counts similar items based on counting samples made

USB Connection to Computer –USB interface connection to send data from computer to scale or to printer

RS232 Thermal Printer Connection –allows printing of labels from your computer to the thermal printer (via scale)

Scale Specifications

?Capacity : 22lb

?Graduation / Resolution :0.1oz

?Minimum Weight detection :0.1oz

?Min startup weight detection : > 0.1

?Accuracy :±0.1% of the reading

?Power consumption :Approx. 0.35 watts

?Tare : Unlimited (not exceeding the scale range)

?Weight of Unit Scale :2.30 lbs

?Dimensions :10.4” X 7.9” X 3.1”

?Platform Size :5.7” x 7.5”

?Power :AC adaptor: 9V, 100mA (Optional)

USB: Self powered or

Battery: 6 AA size batteries

(not supplied)

Thermal Printer Specifications

?Printing System :Thermal

?Maximum Characters Per Line :48

?Print Width : 2.28”

?Interface : Serial

?Input Data Format : RS232C (1 Start, 8 Data, 1 Stop, No Parity)

?Baud Rate : 9600

?Print Buffer Size : 4 kilobytes

?Power Supply : 5V DC

?Power Consumption (standby) : 40mA

?Power Consumption (operating) : 4A (max)

?Operating Temperature Range : 0oC to 50oC

?Dimensions : 7.28” X 4.53” X 3.94”

?Weight : 1.70 lbs (excluding cable and power adapter)

Printer Mechanisms

The printer mechanism comprises a 384-element, thin film head and a stepper motor-drive transport. Head

temperature compensation is utilized to provide constant print quality across a range of operating conditions.

Paper Out: The printer will automatically detect when the paper has run out. The paper signal will blink to

denote that the paper has run out.

Head Thermal Limit: After excessive printing, the paper head temperature may rise to an unusable level. If

this occurs, printing will be suspended until the temperature returns to normal levels.

Preparing the Scale for Use with Printer

1) Fix the weighing platform gently to the body of the scale via the four location points. The slope edge of the platform

should face the front part. (DO NOT press hard on the platform).

2) Plug the mains adapter supplied with the scale into the mains and connect the adapter's output plug to the input

socket at the rear side of the scale.

3) Unpack the printer.Plug the mains adapter supplied with the printer into the mains and connect the adapter’s

output plug to the input socket at the rear side of the scale. Connect the printer with the scale via the RS232 cable

supplied.

4) Connect end B of the supplied USB cable at the back of the scale. Connect end A of the cable to an available USB

port of the computer.

3) Placethescale on a firm and even surface. Press the "ON" key on the keyboard panel on the front side.

4) The display will show “uES2200” and "Scan Zero …"for a while. After this, scale will go to Weighing mode (lb

oz) by default. Now the scale is ready for weighing and counting. This is the normal mode of the scale.

5) Turn the printer ON. The ON/OFF switch of the printer is located at the front left side of the printer.

Operating the Scale

Weighing

Press the LB-OZ key to show the weight on the scale’s LCD. This is the normal weighing mode of the scale.This key

will toggle the weight between lb-oz and gram.

Counting

Press Sample to enter the sampling mode. Press up or down key to increment and decrement the sampling number

respectively by the step of 10. (Pressing the CE key in the sampling mode will exit to the counting mode). Once the

desired sampling number is chosen put the items on the scale and press Sample. The scale will memorize this

sampling number andstart counting the items.

Tare

Press the TARE key to set the weight to zero. This is useful for weighing an item with a container. Put the empty

container and press TARE. The scale weight display becomes zero. The items to weigh or count may now be placed

on the scale. Only the weight of the items (excluding the container) is displayed. “T” appears at the lower left corner of

the LCD when the scale is in Tare mode.

Line Feed

Press Line Feed key tofeed empty lines. This will cause the paper to move forward to the next line.

STAMPS.COM Support

Press this key to open thesupport webpage of Stamps.com website on the web browser.

Printing Mail Labels from the Computer to the Printer via the Scale

Labels can be printed from the computer to the printer using the application program that comes with this

product. To print mailing labels, follow these simple steps:

1. Make sure that the USB scale is connected to your computer and the thermal printer is connected to

the USB scale (see previous instructions for connections).

2. Turn the scale ON.

3. Turn the printer ON.

4. Run the application program.

5. Put the item to be mailed on the scale’s platform to capture the weight from the scale to the application

program (the Weight field will be automatically updated on the program).

6. Supply the other information in the following fields (all are required):

a. Barcode

b. Postal Number

c. Postal Service

d. Zip Code

e. Shipping Address

7. Click Create Label button on the program. A preview of the label can be seen on the lower part of the

application window.

8. Click Print Label button to print this label to the thermal printer.

9. Repeat steps 5 to 8 when printing another label.

Operating Temperature

The scale is designed to operate in a normal room temperature. If subjected to cold or warm temperature, it should be

allowed to reach the room temperature before operating.

Using the Supplied AC Adapter

Connect the AC adapter into the power jack and the output outlet on the rear side of the scale. This adaptor is center

negative 9V.

Operate on a Firm, Flat-Leveled Surface

In order to operate correctly, the scale must be installed on a firm, flat-leveled surface.

Error Displays

Overload Displays when the weight on the platform is more than the scale’s maximum capacity.

PRINTER COMMANDS –Sending Data from PC to Scale for Printing

Name: LINE FEED

Function: Moves the line pointer to the next line

Expression: <0x0A>

Name: DOT FEED

Function: Moves the line pointer horizontally by nnumber of dots

Expression: <0x1B><0x4A><n>

Where n is the number of dots to move from the current horizontal position (n can be 0 to 255)

Name: MULTIPLE LINE FEED

Function: Moves the line pointer by nnumber of lines

Expression: <0x1B><0x64><n>

Where n is the number of lines to move from the current vertical position (n can be 0 to 255)

Name: INTER-CHARACTER SPACE

Function: Sets the inter-character space to 1/6” (fixed)

Expression: <0x1B><0x32>

Name: INTER-LINE SPACE

Function: Sets the inter-line space according to nnumber of dots

Expression: <0x1B><0x33><n>

Where n is the number of dots to set (n can be 0 to 255)

After n is set, the inter-line space is computed as follows (in inches): (n/203)

Example: if n is 30, the inter-line space would be 0.15”

Name: RESET

Function: Restores default settings of the printer and also resets printer buffer

Expression: <0x1B><0x40>

Name: PAPER CHECK

Function: Sets paper checking while printing

Expression: <0x1B><0x63><0x34><n>

If n = 0 no checking if out of paper while printing

n = 2 checks and stops printing if out of paper

Name: CHARACTER SIZE

Function: Sets the width and height of characters to be printed

Expression: <0x1B><0x21><n>

Where n is composed of the following bits:

7 6 5 4 3 2 10 (bit number)

X X D5 D4 X X X X

Xbits can be either 0 or 1 (don’t care bit values)

D5 if 0 sets to normal width of character

if 1 sets to double-sized width of character (double than the normal width)

D4 if 0 sets to normal height of character

if 1 sets to double-sized height of character(double than the normal height)

Examples:

If n is 0 (all bits are 0), then the characters to print will have normal width and height.

If n is 12 (00110000), then the characters to print will have double-sized width and double-sized height.

If n is 8 (00010000), then the characters to print will have normal width but double-sized height

Name: GRAPHICS PRINTING MODE

Function: Sets the options for printing graphics

Expression: <0x1B><0x2A><m><n1><n2><d0d1, d2, d3, …… dk>

Where:

mis the mode –if 0 sets to 8 dots single density

–if 1 sets to 8 dots double density

–if 32 sets to 24 dots single density

–if 33 sets to 24 dots double density

n1, n2 is the size of data in bytes

n1 –lower byte (from 0 to 255)

n2 –higher byte (from 0 to 3)

d–graphics contents

k–if m is 0 or 1, it is equal to (n2 * 256 + n1)

–if m is 32 or 33, it is equal to ((n2 * 256 + n1)*3)

Name: ABSOLUTE POSITION PRINTING

Function: Sets an absolute position for printing in reference to the current position of the pointer (or print head)

Expression: <0x1B><0x24><n1><n2>

Where: n1 is the lower byte of the value to set

n2 is the higher byte of the value to set

The absolute position is computed as follows (in millimeters):

position = (n2 * 256 + n1)*0.125mm

Example: if value is set to 100 (n1 = 100, n2=0), printing position will be set to 12.5mm after pointer

Note: The maximum number of bytes per data transfer from PC to scale is 8 bytes.

[D7 D6 D5 D4 D3 D2 D1 D0]

Where D7 is always the length of the packet including D7

For faster printing, when D7 is 0x08 the scale will stop other functions and just receives the data from PC and

transmit to printer. So, at the end of printing job, PC has to throw byte with D7 other than 0x08.

Inhaltsverzeichnis

Andere Stamps.com Drucker Handbücher

Stamps.com

Stamps.com P2 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung