Stanley Simple Start P2G7S Bedienungsanleitung

QUICK START GUIDE

WARNING

Read all your vehicle and the lithium-ion battery booster instructions before

operating the unit. Failure to follow instructions may result in electric shock,

ﬁre and/or serious injury.

ICONS + COLORS

The SIMPLE START™

Li-Ion Battery Booster is

equipped with an LED

indicator ring that changes

color depending on unit’s

function or condition.

This guide indicates what

the icons and colors mean:

BLINKING

SOLID

ALTERNATING COLORS

UNIT

BATTERY

STATUS

VEHICLE

BOOSTING

STATUS

FAULT

CONDITIONS

Low Medium Full

Ready

to Start

Vehicle

Charging

Boost

Stage 1

Boost

Stage 2

Boost

Stage 2

Low Battery

Voltage

Recharge Unit

Unit Overheat or

Reverse Clamps

Vehicle

Battery

Fault

HOW TO BOOST A VEHICLE

1. Connect to the vehicle (two ways to connect):

A. Connect the unit to the vehicle’s

DC accessory outlet.

B. Connect the unit directly to the vehicle

battery with the included battery clamps.

2. Press the main power button to turn the unit ON.

The SIMPLE START™ will automatically detect

the vehicle’s depleted battery and will begin the

process to boost.*

3. When the LED changes to solid green the vehicle

is ready to start.

Ready

to Start

Vehicle

Detecting

Analyzing

Initial Boost

Boosting Final Boost

Stage 1 Stage 2 Stage 3 Go!Power ON

*Note: Some vehicles may require you to turn the ignition key to the ACC (accessory) position to activate the

DC accessory outlet.

AREA LIGHT

1. Press the Main Power Button to turn the unit ON.

2. Press the USB/ Light Button to turn on the LED area light.

3. To turn the light OFF, press the USB/ Light Button again.

1 2

2 AMP USB PORT

1. Press the Main Power Button to turn the unit ON.

2. Press and hold the USB/ Light Button for 2 seconds and release to turn on the USB

Charging Port. The ring around the port will turn blue.

3. Plug in your USB Device to power or recharge.

4. To turn off the USB charging port, press and hold the USB/ Light Button for 2 seconds and release.

1 3

Note: After 1 Minute of inactivity the SIMPLE START™ will shut down to protect the internal battery.

Hold for

2 Seconds

and release

HOW TO CHECK THE UNIT BATTERY STATUS

Press the Main Power Button. The LED Indicator ring will light up Blue, Yellow or Red

to indicate the unit’s Battery Status.

80 - 100%

41 - 79%

1 - 40%

HOW TO CHARGE THE UNIT AT HOME

1. Connect the AC adapter to the single pin connector

port on the side of the unit and plug into a wall outlet.

2. The LED Indicator ring will flash blue while charging

and light solid blue when fully charged.

Fully Charged

Charging

HOW TO CHARGE THE UNIT IN YOUR CAR

Fully Charged

Charging

1. Connect the DC charging cable to the Unit’s dual Pin

Connector and plug it into the vehicle’s accessory outlet.

2. Press the Main Power button to turn the unit ON.*

3. Depending on vehicle voltage the unit may start to flash

blue indicating it is recharging.

4. The LED Indicator ring will flash blue when charging and

light solid blue when fully charged

If the LED indicator flashes red, yellow or

green, then press the USB/Light button

for 5 seconds and release to force the

unit into charging mode.

*Note: Some vehicles may require you to turn the ignition key to the ACC (accessory) position to activate the

DC accessory outlet.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stanley Extender Handbücher

Stanley

Stanley SSLION Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung