Stanley MODEL 1 Bedienungsanleitung

www.stanleytools.com

User Manual

Directly plug the power cord in the receptacle on the wall. Do not use extension cord.

If the power cable or plug is worn or damaged, pull out the power plug.

The exposure of the interior of the machine can cause electric shock or burns.

Do not remove covers or screws other than specified in this manual.

Please be cautious. In the process of printing, the temperature of the nozzle and the heated

bed rise higher than 100 degrees Celsius.

Do not place the machine in a highly moist environment as it may cause deformation and

malfunction.

Avoid contact of electrical terminal with metal product such as necklaces, coins, keys,

watches, etc.

Do not hold the shaft for lifting or moving of the printer.

For the following situations turn off power and pull out the power plug

When in contact with liquid

When in need for a service or repair request

When the device cover is damaged

For the method of disposal contact local service center or use a proper collection site.

Please turn off power when leaving the office after business hours or in circumstances where

machine is unoccupied for a long period of time as it may cause abrupt fire accidents.

Protect device from humid or wet conditions eg. rain, snow, etc

Remove power cord from receptacle on the wall before moving device.

Be careful not to damage power cord while device is being translocated.

When removing the power cord, please pull the plug and not the power cable.

Be cautious of clips, staples and any other small metal objects from falling inside the device.

Please be cautious on safety when touching the interior of the machine, e.g. cleaning the

interior.

Do not dispose of device or consumables together with household waste.

For the method of disposal, please contact local service center or use a proper collection site.

Interior of device may be very hot. Please do not touch the part with “Caution: High

Temperature” sign or its surrounding areas as it may cause burns.

Our product maintains high quality standards and performance.

It is recommended to use genuine components only, components can be acquired from any

authorized distributors.

Safety Instructions

Warning: Failure to observe the instructions may lead to death or serious injury.

Caution: Failure to observe instructions may cause injuries or damages to property.

Be sure to observe the followIng instructions when using the device.

Thank you for purchasing our product.

This user manual contains detailed information about correct use of device and easy

maintenance to maintain the optimal state, and to contribute to the rationalization of

office work of your company.

Carefully read the user manual before using the device and keep close at hand.

In order to use device correctly and safely, please carefully note the precautions before use.

Before use

Prohibition and limitation

1. This User Manual has been created for the convenience of the user, actual product

may differ from image and explanations shown.

2. The contents of this user manual is subject to change without notice. We are not

responsible for the direct and/or indirect loss or damages caused by results of handling

or operating the product in any case and for results occurring from user’s negligence.

3. The copyrighted literary works can be duplicated and used for personal use or

household use and within the same parameter. In other cases than the

aforementioned, it is prohibited by law.

4. The above details present only a part of the applicable laws and regulations.

Details on these laws/regulations may not be stated as they are. We do not guarantee

its correctness and completeness. Please consult a legal advisor to check if the object

you intend to print is legal.

5. User is responsible for all loss derived from modification of the product executed by

the user or third party.

Before using the Machine

1. Preface ---------------------------------------------------------------------------------------------------------------------------------- 1

2. Conventions --------------------------------------------------------------------------------------------------------------------------- 2

2.1 Symbols ------------------------------------------------------------------------------------------------------------------------- 2

3. Safety Information ------------------------------------------------------------------------------------------------------------------- 3

4. Precautions ---------------------------------------------------------------------------------------------------------------------------- 5

4.1 Installation --------------------------------------------------------------------------------------------------------------------- 5

4.2 Moving the Machine-------------------------------------------------------------------------------------------------------- 6

5. Consumables Handling ------------------------------------------------------------------------------------------------------------- 7

6. Instructions for Use ----------------------------------------------------------------------------------------------------------------- 8

7. Ventilation ----------------------------------------------------------------------------------------------------------------------------- 9

8. Notices ------------------------------------------------------------------------------------------------------------------------------- 10

9. Disposal of Used Battery --------------------------------------------------------------------------------------------------------- 12

10. Wifi Module Disclaimer ---------------------------------------------------------------------------------------------------------- 13

11. USB Memory Disclaimer ---------------------------------------------------------------------------------------------------------- 15

Chapter 1 Preparations for Machine Operation

1. Machine Specifications ---------------------------------------------------------------------------------------------------------- 1-2

1.1 Printing ---------------------------------------------------------------------------------------------------------------------- 1-2

1.2 Temperature/Speed ----------------------------------------------------------------------------------------------------- 1-2

1.3 Machine --------------------------------------------------------------------------------------------------------------------- 1-2

1.4 Software/Support ------------------------------------------------------------------------------------------------------- 1-2

1.5 Default Setting of Print layer Width ------------------------------------------------------------------------------- 1-2

2. Basic Components ---------------------------------------------------------------------------------------------------------------- 1-3

3. Understanding the Device Parts ----------------------------------------------------------------------------------------------- 1-4

4. Installation (Product connection, Cartridge Setup and includes Software Installation) ------------------------ 1-6

4.1 Device Connection ------------------------------------------------------------------------------------------------------- 1-6

4.2 Program Installation ---------------------------------------------------------------------------------------------------- 1-6

Chapter 2 UI Menu Functions

1. UI Menu Function description -------------------------------------------------------------------------------------------------- 2-2

1.1 CARTRIDGE------------------------------------------------------------------------------------------------------------------ 2-3

LOAD ------------------------------------------------------------------------------------------------------------------------- 2-4

Contents

UNLOAD -------------------------------------------------------------------------------------------------------------------- 2-5

UNLOCK --------------------------------------------------------------------------------------------------------------------- 2-7

1.2 Settings -------------------------------------------------------------------------------------------------------------------2-10

X, Y, Z -----------------------------------------------------------------------------------------------------------------------2-11

EXTRUDER -----------------------------------------------------------------------------------------------------------------2-13

BED LEVELING ------------------------------------------------------------------------------------------------------------2-15

Z OFFSET -------------------------------------------------------------------------------------------------------------------2-17

NOZZLE CLEANING ------------------------------------------------------------------------------------------------------2-19

CLEANING CASE ---------------------------------------------------------------------------------------------------------2-21

NETWORK ----------------------------------------------------------------------------------------------------------------2-22

LAMP ------------------------------------------------------------------------------------------------------------------------2-26

BED LOWERING ----------------------------------------------------------------------------------------------------------2-28

TEST PRINT ----------------------------------------------------------------------------------------------------------------2-29

POWER SAVING MODE ------------------------------------------------------------------------------------------------2-31

BEEP SOUND --------------------------------------------------------------------------------------------------------------2-32

NOZZLE SETTING --------------------------------------------------------------------------------------------------------2-34

LANGUAGE ----------------------------------------------------------------------------------------------------------------2-36

E-MAIL ----------------------------------------------------------------------------------------------------------------------2-38

UNIT -------------------------------------------------------------------------------------------------------------------------2-42

TIME SETTING ------------------------------------------------------------------------------------------------------------2-43

TIME ZONE ---------------------------------------------------------------------------------------------------------------2-45

SOFTWARE UPDATE ----------------------------------------------------------------------------------------------------2-46

1.3 Information ---------------------------------------------------------------------------------------------------------------2-48

Chapter 3 Printing

1. Printing ------------------------------------------------------------------------------------------------------------------------------ 3-2

1.1 Printing from USB Flash Drive ---------------------------------------------------------------------------------------- 3-2

1.2 Printing Via PC ------------------------------------------------------------------------------------------------------------ 3-6

1.3 Next print job ------------------------------------------------------------------------------------------------------------- 3-6

Chapter 4 Printed Output Check

1. Printed Output Check------------------------------------------------------------------------------------------------------------- 4-2

1.1 Detaching Printable ----------------------------------------------------------------------------------------------------- 4-2

1.2 Improving Printing Quality ------------------------------------------------------------------------------------------- 4-4

2. When Printer Cannot be Turned On ------------------------------------------------------------------------------------------ 4-5

Chapter 5 Maintenance

1. Machine Cleaning ---------------------------------------------------------------------------------------------------------------- 5-2

1.1 Cleaning Case Maintenance ------------------------------------------------------------------------------------------ 5-2

1.2 Printer Interior Cleaning ----------------------------------------------------------------------------------------------- 5-2

1.3 Periodical Inspection ---------------------------------------------------------------------------------------------------- 5-2

Oil/Grease Inspection ---------------------------------------------------------------------------------------------------- 5-2

2. Error Message and Solutions -------------------------------------------------------------------------------------------------- 5-3

3. Problems and Solutions -------------------------------------------------------------------------------------------------------- 5-6

3.1 If filament does not come out of the nozzle (Fix for EC401) ----------------------------------------------- 5-6

3.2 In Cases where Filament is Cut Between the Extruder and Nozzle --------------------------------------- 5-7

3.3 When Filament End is Visible Outside the Cartridge After Unloading ---------------------------------- 5-7

4. Replenishing Consumables ---------------------------------------------------------------------------------------------------- 5-8

4.1 Bed Replacement --------------------------------------------------------------------------------------------------------- 5-8

Removing Aluminum Bed --------------------------------------------------------------------------------------------- 5-8

Installing Aluminum Bed ---------------------------------------------------------------------------------------------- 5-8

4.2 Filter Replacement ------------------------------------------------------------------------------------------------------- 5-8

4.3 Cartridge Replacement ------------------------------------------------------------------------------------------------5-10

4.4 Nozzle Replacement ---------------------------------------------------------------------------------------------------5-10

Methods of Detaching Nozzle --------------------------------------------------------------------------------------5-10

Assembling the Nozzle ------------------------------------------------------------------------------------------------5-12

Chapter 6 Appendix

1. Type of Consumables (Material, Color) ------------------------------------------------------------------------------------- 6-2

Before using the Machine

1. Preface

This User Manual describes detailed explanations and points to note in connection with operating and using

the machine. Please read the User Manual carefully before using machine, and keep it for reference purpose.

Important

The content of the User Manual is subject to change without any prior notification.

Sindoh shall not be liable for consequential, special, indirect damages or losses caused by the handling or

operating of the machine or by the user’s negligence.

Copyrighted works can be printed and used for home and/or personal use; other usage is prohibited by

law.

The above details present only a part of the applicable laws and regulations and the details of the law

may not be stated as they are. Sindoh is not responsible for its correctness and completeness.

Please consult your legal advisor to check if the object you intend to print is legal.

Note

The User Manual may include a little different descriptions of the machine from the actual one.

Some options may not be available in some countries. Please contact local distributor for details.

Some standard units are optional in some countries.

Please consult your local service center.

In some countries some models are not available.

Please consult your local sales office.

This manual uses metric units of measurement

Before using the Machine

2. Conventions

2.1 Symbols

This manual uses the following symbols and meanings.

Warning

Indicates importance safety notes.

Ignoring these notes could result in serious injury or death.

Be sure to read these notes carefully for your safe operations of the machine.

Caution

Indicates important safety notes.

Ignoring these notes could result in minor injury, or damage to the machine or to property.

Be sure to read these notes for your safe operations of the machine.

Important

Indicates points to pay attention to when using the machine, and explanations of likely causes of filament

misfeeds, damage to originals, or loss of data.

Be sure to read these explanations before operating the machine.

Note

Indicates supplementary explanations of the machine`s functions, and instructions on resolving user errors.

Reference

This symbol is located at the end of sections. It indicates where you can find further relevant information.

[ ]

Indicates the messages or menus that appear on the machine`s LCD display panel.

Indicates the names of each function key on the machine control panel and the display window.

Before using the Machine

3. Safety Information

Plug the power cord into a properly grounded outlet which is near and quickly accessible from the machine.

Do not use or place the machine in wet or humid environment.

Caution Hot Surface

The inside of the machine may be hot. To reduce the risk of injury from a hot component,

allow some time to cool down.

(Please be cautious of getting burns during printing as the Nozzle and the heating bed

will maintain a high temperature of over 100 degrees.)

Do not put any portion of your body or objects on any part during machine operation as the motor and

bed can be in very high temperature and can cause burns/injuries. Please be cautious.

When the power is on, do not let any of your body touch the machine except the bed.

If you have to touch the bed while the power is on, please do so after the bed temperature has been

lowered to room temperature.

If you have to touch any parts other than the bed, please do so after the bed and nozzle temperature have been

lowered to room temperature.

Caution Electric Shock

Proceed your work after turning off the machine and unplugging the power cord

from the outlet in case of accessing the system board, or installing hardware or

optional memory devices. If the machine is connected with other device, turn it off and

separate the cables from the machine.

This product has been designed, tested and approved to meet strict safety requirements

of international safety standard. Some safety features of parts may not be guaranteed.

Sindoh is not liable for problems caused by using an unauthorized spare parts or consumables.

Disconnect the power cord and all the cables connected to the machine to prevent from any electrical shock

when cleaning the outside or inside of the machine.

Caution Injuries

Do not twist, fold, step or place heavy objects on the powercord.

Be careful with the power cord peeled off or overloaded.

Do not let the power cord pinched by furniture or walls.

Misusing the cord could result in fire or electrical shock.

Check the cord regularly. When checking the cord, unplug the cord from the outlet first.

Please consult a qualified engineer for services or repairs not stated in this User Manual.

Before using the Machine

Caution Injuries

To prevent personal injuries or damages to the machine, you need to follow the below

instructions before moving the machine.

Do not open the front and top door during machine operation.

When the power is on, do not let any of your body touch the machine except the bed.

If you have to touch any parts other than the bed, please do so after turning the

power off, removing the power cord from the plug and after the bed and nozzle

temperature have been lowered to room temperature.

Turn the power switch off, then unplug the power cord from the power outlet.

Unplug and release all the cords and cables before moving the machine.

Only use the power cords provided with this machine or cords that are approved by the manufacturer.

Do not put any portion of your body or objects during machine operation, as the bed, motor, nozzle will be in

operation and moving. Small objects such as neckless, hair, etc may cause personal injuries or

damages to the machine.

If any problems occur(malfunction, body part being caught inside the machine, etc) during machine operation,

quickly press the pause or stop button located on the on the bottom right of the touch screen located on

the bottom right of the upper side.

Nozzle Bed UI

Inhaltsverzeichnis

Andere Stanley Drucker Handbücher

Stanley

Stanley STDG5006 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung