Starfire SF -2100 - c Bedienungsanleitung
1
catalogue
SF - 2100 - c fast operation manual.........................................................................3
The first chapter system operation panel.................................................................3
The second chapter main interface ........................................................................... 5
The third chapter cutting process..............................................................................6
Automatic cutting process diagram..............................................................................6
The first section selection processing graphics...........................................................6
3.1.1 gallery features................................................................................................... 7
3.1.2 processing file selection ...................................................................................... 8
3.1.3 parts option function......................................................................................... 10
The second section setting processing parameters.................................................. 11
The fourth chapter machining process....................................................................... 14
4.1 to suspend operations ......................................................................................... 14
4.2 after suspend mobile perforation position or cutting position............................... 15
4.3 the original track back processing........................................................................ 15
4.4 breakpoints recovery and restore power.............................................................. 16
4.5 parts of functions.................................................................................................17
4.6 the edge of the thick plate perforation.................................................................18
The fifth chapter interface definition .......................................................................... 19
5.1 interface diagnosis and definition......................................................................... 19
The sixth chapter Description of built-in height control function.................................20
6.1 System composition............................................................................................. 20
2
6.2 Parameter explanation......................................................................................... 21
6.3 Wiring definition .................................................................................................. 22
6.4 Fault description .................................................................................................. 23
6.5 Arc pressure setting............................................................................................. 23
Appendix 1: software upgrade instructions ..................................................... 24
3
SF -2100 - c fast operation manual
SF - 2100 - c flame/plasma CNC system fast operation manual:
The first chapter system operation panel
【F1】-【F8】: Function keys, under different interface, with the corresponding prompt functions
【S↑/PgUP】： Under the code interface is up page key, in the hand or automatic interface is cutting
torch up
【S↓/PgDn】： Under the code interface is down page button, in the hand or automatic interface is
cutting torch falls off
【F↑/HOME】： Under the code interface is key to jump the line first, under the operating interface is
to speed up the speed
【F↓/END】： Under the code interface is to jump to the line end , under the operating interface is to
slow down speed
【1】-【9】： Numeric keys, enter the corresponding letter button, please click on the "shift" key
Mobile cutting torch or move the cursor around
The enter key to confirm the input value or select the project
Escape key to exit the current interface or deselect
4
Function switch, press the button to open the corresponding function
The blank space key, input composite keys for the shift key, according to an effective
time, press a button to enter automatic processing interface under the main interface
5
The second chapter main interface
After the system is powered on, interface is shown in figure 1:
figure 1
Under the main interface, press "F1" - "F8" corresponding to the following functions：
[F1]：Gallery, enter can choose commonly used 24 kinds of graphics libraries, most have die size and pore
size.
[F2]
file, enter can choose the native file, U disk file, edit, import and export operation, etc.
Options:
[F3] Option, the machining parts for mirror, rotate, starting point, rotation correction, scaling, parts, etc.
[F4] : parameters. All parameters can be set up in this.
"F5" : diagnosis, input and output diagnosis, system Settings, emptying storage file, reduction, the I/O custom
parameters.
[F6] : graphics zoom, zoom in graphics, view the perforation, as well as cutting information display.
[F7]: manual, manual mobile machine, coordinate system reset, the back, select the breakpoint.
[G] : set the cutting mode, the optional flame, plasma, demonstrates three modes.
[X] : set manual movement speed.
[F] : set up automatic cutting speed.
[T] : set the preheating time delay.
[N] : before the start of the cutting operation, you can set the slot size
.: start the cutting
：Pause or stop cutting
6
The third chapter cutting process
Automatic cutting process diagram
7
The first section selection processing graphics
This system can select from gallery selection system processing graphics and users from the U disk or storage
area to the graphics processing
3.1.1 Library function
System main interface press "F1" button to enter gallery features, main picture below
Selection of graphical parts
At present this system provides 24 graphic unit, press the direction key【↑】【↓】【←】【→】mobile highlight cursor,
choose the required graphics, key confirmation, the confirmation of graphics parameters into the
interface
Graphical interface parameters:
8
Press the direction key【↑】【↓】【←】【→】Move highlighting the cursor, modify graphics parameters，Press【F1】-【F4】
Choose graphically，Rotation discharge。Press【F6】Submit the modified parameters，Press【F7】Confirm the cutting current
graphics，Confirmed the system automatically returns to the switch on the main interface, and displays the graphics editor。
3.1.2 Processing file selection
Under the main interface press【F2】， into the interface of File management
As shown in the figure below。
F1 CNC file into the hard disk file list, as shown, the system list file list
9
F2 USB file documents show U disk directory
F3 EDIT Edit the current cursor file
F4 DEL-FILE Delete the current cursor file
F5 COPY TO USB The current cursor file is copied to the external usb drive
F6 NEW FOLDER Can create a folder under the root directory
F7 OK Make sure the current cursor processing file, and exit to the main meeting。
Read U disk file
Under the file management interface，press【F2】into the Usb file interface, in the interface,【F5】Automatically from the
"copy to usb flash drive" into "copy to the native". In the choice to the corresponding cutting code file, press【F5】the system
will automatically save the file to the file.
Edit the current file
10
Under the file interface, move the cursor to the need to edit the file name, press【F3】Edit the file。
Input characters, some of the key is to reuse a key, , reuse is the character that the downside of keys, click on the first【Shift】
Press the reuse button again, the input is to reuse the upside of keys。
When editing code, press【F1】Can be inserted in the current edit line, press【F2】Delete the current line 。press【F3】
Create a new file, press【F4】Create a new folder。
3.1.3 Parts option function
Under the main interface, press 【F3】， into the Parts option interface
【F1】： Starting point selection, continuous key, can choose the starting location.
Inhaltsverzeichnis
Andere Starfire Controller Handbücher
