Starkey RIC 312 Bedienungsanleitung

Get Started

1Launch Inspire X and insert batteries into

the hearing aids.

2On the Get Started screen, select View

Programmers, then choose the 2.4 GHz

wireless programmer and select OK.

NOTE: Expected range for wireless

programming is 30 feet.

3Select the check box next to the hearing aid(s)

to be programmed.

4Select Read Device Settings to begin a new

ﬁtting or for a follow-up ﬁtting session using

the current settings in the hearing aids or Load

a Previous Session to retrieve a previously

saved session.

5Select Start.

Initial Fit and Auto Path

Initial Fit launches automatically when programming new hearing aids.

1Select the appropriate Acoustic Options,

then select OK.

2Select the appropriate Experience with

Ampliﬁcation. [Fig. 1]

Refer to the Experience Manager QuickTIP

for additional information.

3Insert hearing aids into the patient’s ears, reduce all

sources of noise, then select Begin to run the Auto Path.

NOTE: If hearing aid programming is conducted prior

to the ﬁtting appointment, re-run the Feedback Canceller

with the hearing aids in the patient’s ears.

3Review the Auto Path results screen. Select Restart

if status is incomplete for any steps, or select Close

to continue.

Initial Fit Protocol

Figure 1

For 2.4 GHz Thrive platform RIC 312, Micro RIC 312 and BTE 13 hearing aids.

User Controls

The User Control Conﬁguration demo box will appear upon initial programming. Select Show Demo for demonstration

of user control conﬁguration options, or select Don’t show again and Close.

1Drag any user control you wish to enable from

the left and drop it on a gesture on the right.

User control options include: Hearing Aid Volume,

Memory, Tinnitus Level, Mute, Accessory Start/Stop,

Accessory Volume, Manual Alert, Thrive Assistant

and Edge Mode. Gesture options include: Short

Press, Push & Hold, and Double Tap. [Fig. 2]

NOTE: Double Tap is only available for select AI products.

NOTE: Manual Alert, Thrive Assistant and Edge Mode

are only available for Edge AI products.

2Click on VC Range and Step Size. Select Pins to

adjust VC Range. Select Step Size of 2 dB or 4 dB.

NOTE: Inspire X software will not allow for adjustments

to VC Range and Step Size if volume control is not enabled

in User Control Settings.

QuickFit and Fine Tuning

1Select QuickFit on the left navigation bar to make

global ﬁtting adjustments. [Fig. 3]

2Select the Memory drop-down arrows on the

memory bar to program memories.

3Select Fine Tuning on the left navigation bar or

from the bottom of the QuickFit screen to make

detailed ﬁtting adjustments of individual channels

and input levels.

4Select Tables or Sliders to choose desired view

for adjustments.

5Select +to expand Low, Mid, High and/or Ultra

channel groups.

6Select channels and input levels to adjust, then select

up and/or down arrows to make adjustments.

Patient Tools

Select Patient Tools from the left navigation bar,

then select Self Check. Place hearing aids on a

ﬂat surface with the receiver facing up. Reduce

all sources of noise. Click Set Baseline to begin.

A brief, robust stimulus will play in each hearing aid.

A green check mark for each component indicates

the baseline was established.

NOTE: A baseline will be automatically established

for Edge AI devices. For all other devices, a baseline

must be established by the hearing professional

within the Inspire software.

Please refer to the QuickTIP library for additional

information on Self Check, Remote Programming

and Fall Alerts.

Figure 2

Figure 3

Patient Tools (Continued)

Select Remote Programming under Patient Tools

to enable remote programming. Click the Check Box

next to Remote Programming. Then click Accept after

reviewing the disclosure notice with your patient. Next,

click the code generator icon to generate a unique code

for your patient to enter into their Thrive Hearing Control

app to allow access for Remote Programming. [Fig. 4]

Select Auto Fall Alert under Patient Tools to change

the Fall Detection Sensitivity and complete the Fall

Risk Screening with your patient. Please refer to the

Fall Alert QuickTIPs for full instructions on completing

setup and use. Please note Auto Fall Alert is only

available for Edge AI hearing aids. [Fig. 5]

Additional Adjustments

Refer to the QuickTIP library for information on various features, such as Sound Manager, Tinnitus, and Frequency Lowering.

Memories and Speech Indicators

Select Memories on left navigation bar or select Memories from the middle of all ﬁtting screens.

1Select drop-down arrows to extend the Memories

menu, then select the desired memories to program.

2If conﬁguring a Music Memory, refer to the Music

Memory QuickTIP.

3Speech Indicators can be customized.

(See Indicators on next page).

4The memory bar will default to a display of the selected

environment (for example, “Outdoors”). Select the

speech bubble to change the display to the speech

indicator that has been conﬁgured (for example, the

Outdoors memory will display as “Golf”). [Fig. 6]

Accessories

Select Accessories on the left navigation bar to conﬁgure

2.4 GHz accessories. Click on the information icon for

speciﬁc pairing instructions for any of the accessories.

Follow pairing instructions via the information icon to pair

within Inspire X. Once paired, adjust the Hearing Aid Mic

While Streaming for the streaming accessories and the

Favorite Button Conﬁguration for the Remote. [Fig. 7]

Refer to the 2.4 GHz wireless accessories QuickTIPs for

additional information.

Figure 6

Figure 7

Figure 4

Figure 5

Indicators

Select Indicators on the left navigation bar.

1Select or de-select check boxes

to enable or disable indicators.

NOTE: Volume indicators may be enabled

or disabled on an individual basis.

2 Select Adjust All Indicators to increase or decrease

volume level for all Tone or Speech/Chimes indicators

in 5 dB increments, or to change the voice language.

3Select the Individual Indicator names to adjust

the volume level and stimulus type for individual

indicators. Select the Hearing Aid icon to play

the indicator directly through the devices or the

Computer icon to play the indicator through the

loudspeaker for demonstration purposes.

4Select Memory/Home to conﬁgure Speech

Indicators, which are environment-speciﬁc voice

indicators. As memories are enabled, the default

indicator will match the selected environment

(for example, the user will hear “Outdoors” when

switching into the Outdoors memory). Select the

drop-down arrow under Stimulus to change the

speech indicator (for example, the user has the

option to hear “Golf” when switching into the

Outdoors memory.) [Fig. 8]

NOTE: The Custom and Stream Boost indicators

may be disabled, if desired.

Fitting Summary

Select Fitting Summary on the left navigation bar. [Fig. 9]

Select details to change the status of features, if necessary.

Details are hyperlinks and will navigate to the Feature Names

adjustment screens.

Select the drop down for Auto On/Off under Status to allow

the hearing aids to automatically go into sleep mode when

not in use. This feature is available for AI hearing aids only.

Select Print to generate a Fitting Report, a Data Log Report

or a personalized Device Guide that displays the volume

adjustments, memories and speech indicators that have

been enabled. The Device Guide can be translated into

several languages from the Print screen.

Figure 8

Figure 9

The Starkey logo, Thrive and Inspire are trademarks of Starkey Laboratories, Inc.

Andere Handbücher für RIC 312

Dieses Handbuch passt für folgende Modelle

Andere Starkey Hörgerät Handbücher

Starkey

Starkey Livio BTE R Bedienungsanleitung

Starkey

Starkey J13 Bedienungsanleitung

Starkey

Starkey ARIES PLUS Bedienungsanleitung

Starkey

Starkey RIC 10 Bedienungsanleitung

Starkey

Starkey zpower Bedienungsanleitung

Starkey

Starkey SoundGear Bedienungsanleitung

Starkey

Starkey Livio RIC R Bedienungsanleitung

Starkey

Starkey SurfLink Bedienungsanleitung

Starkey

Starkey StarLink Remote Control 2.0 Bedienungsanleitung

Starkey

Starkey RIC 312 Bedienungsanleitung

Starkey

Starkey RIC 312 i2400 Bedienungsanleitung

Starkey

Starkey Livio R Bedienungsanleitung

Starkey

Starkey Destiny Power Plus Bedienungsanleitung

Starkey

Starkey Rocker Switch RIC 312 Bedienungsanleitung

Starkey

Starkey Rocker Switch Rechargeable RIC Bedienungsanleitung

Starkey

Starkey OtoLens Bedienungsanleitung

Starkey

Starkey RIC Bedienungsanleitung

Starkey

Starkey Livio Bedienungsanleitung

Starkey

Starkey Evolv AI micro RIC 312 Bedienungsanleitung

Starkey

Starkey Wi Series Bedienungsanleitung

Starkey

Starkey Livio ITC R Bedienungsanleitung

Starkey

Starkey Livio Behind-the-Ear Rechargeable Bedienungsanleitung

Starkey

Starkey Livio RIC R Bedienungsanleitung

Starkey

Starkey tour ric 312 Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung

Widex

Widex FL-9 Bedienungsanleitung