General description (Fig.1)
1. Air outlet openings
2. Ventilation slots
3. Power cord
4. Grill racks (3pcs)
5. Fetch tool
6. Rotisserie shaft and forks
7. 3.5L rotating grill basket
8. Door handle
9. Door
10. Non-stick coating drip tray
11. Guide rails/rotisserie spit handle
12. Control panel
4. Grill racks
Can be used not only for dehydration but also to cook crispy snacks or reheat items
like pizza. If you need to bake other meats, it is recommended to brush a little oil on
the rack.
5. Fetch tool
Use to remove the rotating grill basket or rotisserie shaft and forks from the
appliance.
Place the fetch tool under the shaft at both sides of the rotating grill basket
or rotisserie shaft and forks, lift it up (left side first), then gently extract out.
6. Rotisserie shaft and forks
Use for roasts and whole chicken.
Place a fork on the shaft, force the shaft lengthwise through the center of the
meat/chicken. Put on the second fork. Slide both forks into the meat/chicken
and move the meat/chicken into the middle of the shaft, and then tighten the
screws to lock the forks in position. You can adjust the forks closer to the
middle if needed but never past the groove of both ends.
Note: Make sure roast or chicken is not too large to rotate freely within the oven.
Maximum chicken or roast: 1.2 kg.
7. 3.5L rotating grill basket
Great for fries, roasting vegetables nuts and other snacks.
Use the hasp to open and lock the rotisserie basket.
To install the rotating grill basket in the appliance, with the help of fetch tool,
put one end into the hole on left inside the appliance, and the other end on
the hanger on the right.
9. Door
Can be removed for cleaning.
7
