Starmatrix Clever-Pool/220V Betriebsanleitung

CLEVER-POOL ENERGY SAVER

ACCORDING TO：EN61800-5-1:2007

Installation, Operation & Maintanence Instructions

Read this manual carefully before commencing installation

WWW.STARMATRIX.CN

Please leave this instruction booklet with the owner as it contains important maintanence and safty information.

- 1 -

4.1 BUTTON AND FUCNTION EXPLANATION …………………………………………………………………………………13

CONTENTS

1. SAFTY AND CAUTION

1.1 READING BEFORE INSTALLATION………………..………………………………………..…………………………………3

1.2 PRODUCT CHECK BEFORE INSTALLATION ……………..………………………………..………………………………..4

1.3 ENVIROMENT CAUTION ………………………………………………..………………..……………………………………...5

2.1 DIMENSION AND TECHNICAL PARAMETERS………………………………………..………………………………………6

3.1 INSTALLATION ………………………………………..………………………………………………………………………...…7

3.1.1 INSTALLATION SKETCH AND DESCRIPTION………………………………………………………………………….7

3.2 WIRE CONNECTION ……………..……………………………………………………………………………………………… 8

3.2.1 WIRE CONNECTION AND DESCRIPTION FOR 2HP AC220V SINGLE PHASE IN - SINGLE PHASE OUT….….8

3.2.2 WIRE CONNECTION AND DESCRIPTION FOR 3HP AC220V SINGLE PHASE IN - THREE PHASE OUT….….9

3.2.3 WIRE CONNECTION AND DESCRIPTION FOR 5HP AC380V THREE PHASE IN - THREE PHASE OUT….….10

3.3 RUNNING ………………………………………...……………………………………………………………………………. 10

3.3.1 CHECK BEFORE RUNNING………………………………………………………………………………………………10

3.3.2 PROGRAMMING GUIDE …………………………………………………………………………………………………..11

2. PRODUCT DIMENSION AND PARAMETERS

3. INSTALLATION AND FUNCTION EXPLANATION

4. BUTTON AND FUCNTION EXPLANATION

- 2 -

DANGER

1. SAFTY AND CAUTION

1.1 READING BEFORE INSTALLATION

Clever-Pool uses vector frequency technology and is a highly precious electronic device, to ensure for personal and

property safty, please read carefully this instruction before using.

There are marks【DANGER】or【CAUTION】in this book，please strictly obey when moving,installing,using or

checking the product.

1、Please make sure to use the correct power supply.

2、Please make sure to close the control panel before power connection to avoid eletricity shock or

explosion

3、Please make sure not to confuse the input and output terminals.

5、Please DO NOT touch the wire terminals when power is connected.

7、Please DO NOT use wet hands for operation.

6、Please wait after 10 minutes after the power is cut off when all the indication lights are off for further

maintanence.

8、Please ask for professional help if you need to change any parts, strictly forbidden to leave any metal

things inside our Clever-Pool.

4、If our Clever-Pool is stocked over 2 years, please use a voltage adjuster to increase the voltage

gradually when power connection.

- 3 -

CAUTION

3、Power connection is required after control panel closed,electricity shock will occure if against this rule.

9、Please stock our Clever-Pool in a dry,ventilated and cool place.

1.2 PRODUCT CHECK BEFORE INSTALLATION

Each Clever-Pool is 100% tested before factory delivery, you need to check by yourself below:

⑴If our Clever-Pool is the right model you ordered.

⑵Any damage caused by transportation, if yes please do not connect to power supply.

5、Do not disconnect the wire connection if power is connected, serious personal damage will occure if

against this rule.

8、Make sure air ventilation when in summer or high ambient temperature use,this will avoid

condensate water formed and electrical faulty.

1. SAFTY AND CAUTION

1、Installation based on local safty rules.

2、Only professionals for installation and maintanence.

4、Do not touch the terminals,electricity shock will occure if against this rule.

6、Do not touch CMOS elements.

7、No voltage duration test allowed for our Clever-Pool, it will get semiconductor elements damaged.

- 4 -

→No corrosive fluid →No dust or metal scraps

→Away from radioactive or flammable substances →No electromagnetic interference

→No rain drops or wet enviroment

1. SAFTY AND CAUTION

1.3 ENVIROMENT CAUTION

The correct enviroment for our Clever-Pool determines its right function and life. So the installation must obey below:

→Indoor use 　→Ambient temperature:-10℃～+40℃

→No direct sunshine →No oil or salt

- 5 -

Item Model

Clever-

Pool/220V

Clever-Pool

M/220V

Clever-Pool/380V

Input power Single-phase AC Single-phase AC Three-phase AC

Input voltage 220V±15% 220V±15% 380V±15%

Input frequency 50/60Hz 50/60Hz 50/60Hz

Output voltage

1～220V 3～220V 3～380V

PUMP TYPE SINGLE-PHASE THREE-PHASE THREE-PHASE

Max.Power MAX 2HP MAX 3HP MAX 5HP

Max current 12A 10A 10A

Mode option

Cooling

2. DIMENSION AND PARAMETERS

Motor speed

range

2.1 DIMENSION AND TECHNICAL PARAMETERS

Dimension

PARAMETER SHEET

50Hz:1200～3000rpm

60Hz:1200～3600rpm

Manual or Auto

By air

- 6 -

1. Use a cross screwdriver to take

off the screws as shown 3 and plate 1

3.1 INSTALLATION

3.1.1 INSTALLATION SKETCH AND DESCRIPTION

Sketch for Installation

Procedure and instruction

and use screws as shown 2 to fix

3. INSTALLATION AND FUNCTION EXPLANATION

power supply socket.

6、Strictly follow the operation

steps as indicated in this manual.

2、Put plate 1 in your installation place

plate 1.

3、Put the control box 4 on plate 1

and fix with screws as shown 3

4、Connect the plug from pump to the part

as shown 6.

5、Connect plug 5 as shown to the correct

- 7 -

3.2 WIRE CONNECTION

Wires has been preconnected before factory delivery as per request, if you need to

re-connect the wires, please pay attention as below:

3.2.1 WIRE CONNECTION AND DESCRIPTION FOR 2HP AC220V SINGLE PHASE IN - SINGLE PHASE OUT

WIRE CONNECTION SKETCH

Procedure and instruction

3. INSTALLATION AND FUNCTION EXPLANATION

9.Power supply connected only after the

control panel is fixed,

1.Disconnect power before opening the control panel.

2.Make sure no connection between PE,N,L1 termials and

U,V terminals.

3.Wire connection operated only when power disconnected.

4.Check if the input voltage from the power supply is

compliance with clever-pool.

5.No voltage duration test

6.Screw torque for terminal screws more than 1.7N.m

7.Ground link must be connected before operation.

8.Must use the copper wires over 3G1.5mm2

- 8 -

3. INSTALLATION AND FUNCTION EXPLANATION

3.2.2 WIRE CONNECTION AND DESCRIPTION FOR 3HP AC220V SINGLE PHASE IN - THREE PHASE OUT

WIRE CONNECTION SKETCH

3.Wire connection operated only when power disconnected.

4.Check if the input voltage from the power supply is

compliance with clever-pool.

5.No voltage duration test

6.Screw torque for terminal screws more than 1.7N.m

7.Ground link must be connected before operation.

8.Must use the copper wires over 3G2.0mm2

9.Power supply connected only after the

control panel is fixed,

Procedure and instruction

1.Disconnect power before opening the control panel.

2.Make sure no connection between PE,N,L1 termials and

U,V,W terminals.

- 9 -

8.Must use the copper wires over 4G2.0mm2

9.Power supply connected only after the

control panel is fixed,

2.Check if any metal substances left in the product.

3.Check if wire terminals are well tightened.

4.Check if there are naked wires on the terminals touching other terminals.

3.2.3 WIRE CONNECTION AND DESCRIPTION FOR 5HP AC380V THREE PHASE IN - THREE PHASE OUT

WIRE CONNECTION SKETCH

Procedure and instruction

1.Disconnect power before opening the control panel.

2.Make sure no connection between PE,T,S,R termials and

U,V W terminals.

3.Wire connection operated only when power disconnected.

4.Check if the input voltage from the power supply is

compliance with clever-pool.

5.No voltage duration test

6.Screw torque for terminal screws more than 1.7N.m

7.Ground link must be connected before operation.

3. INSTALLATION AND FUNCTION EXPLANATION

3.3 RUNNING AND OPERATION

3.3.1 BEFORE RUNNING AND OPERATION

1.Check if installation and wire connection is 100% correct.

- 10 -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Starmatrix Audio- und Videozubehör Handbücher

Starmatrix

Starmatrix CLEVER-POOL Handbuch

Beliebte Audio- und Videozubehör Handbücher anderer Marken

enerserve

enerserve e.manager nD Bedienungsanleitung

TecnoVideo

TecnoVideo VSPT Series Bedienungsanleitung

NeoVolta

NeoVolta NV14 Gebrauchsanweisung

Horizon Fuel Cell

Horizon Fuel Cell FCJJ-40 Bedienungsanleitung

SC&T

SC&T CD108HD Bedienungsanleitung

4-noks

4-noks PR-SA Kurzanleitung

PROAIM

PROAIM CINEMA Series Bedienungsanleitung

Synergistic Research

Synergistic Research UEF ACOUSTIC DOTS Bedienungsanleitung

Paso

Paso C571/6-V Bedienungsanleitung

CMD

CMD bs6396 Bedienungsanleitung

Bluetti

Bluetti EP600 Bedienungsanleitung

Delta Electronics

Delta Electronics AFE075A43A Bedienungsanleitung

Yamaha

Yamaha PTB-4210 Bedienungsanleitung

Burst Electronics

Burst Electronics MCG-2 Bedienungsanleitung

Panasonic

Panasonic DMP-BD60 - Blu-Ray Disc Player Bedienungsanleitung

mind alive

mind alive Smart Bedienungsanleitung

MagniLink

MagniLink S PREMIUM 2 MLS-HD-2 Bedienungsanleitung

P3 International

P3 International Kill A Watt Bedienungsanleitung