Starrett MTH-550 Bedienungsanleitung
Trust Is In The Name User Manual
PKG08810- UMMTH550
01/18 PDF
READ THIS MANUAL BEFORE USING THE INSTRUMENT
ANTES DE UTILIZAR EL INSTRUMENTO,
LEA ATENTAMENTE ESTE MANUAL
LIRE CE MANUEL AVANT D'UTILISER L'INSTRUMENT
LEIA ATENTAMENTE ESTE MANUAL ANTES
DE UTILIZAR O INSTRUMENTO
使用仪器前请阅读本操作手册
DIESES HANDBUCH VOR DER VERWENDUNG
DES MESSGERÄTS LESEN
LEGGERE ATTENTAMENTE QUESTO MANUALE PRIMA
DI UTILIZZARE QUESTO STRUMENTO
2 PKG08810-UMMTH550
MTH-550 MANUAL TESTER
USER MANUAL
PKG08810-UMMTH550 3
PAGE
Components 5
Introduction 8
Principle of Operation 8
Setup for Use 8
Mounting Force Gage 8
Using Fixtures 8
Performing a Test 9
Horizontal Operation 9
Optonal Accessories 9
Force Gage Adapter Kits 9
Dimensions 10
4 PKG08810-UMMTH550
TABLE OF CONTENTS
Base Mounting Plate
30" Column
Worm Drive Assembly
Optional Digital Scale
Adjustable Handwheel Assembly
Optional DFG Force Gage
PKG08810-UMMTH550 5
COMPONENTS
MTH-550 MANUAL TESTER
THIS IS A STARRETT USER GUIDE FOR THE MTH-550 MANUAL TESTER.
ALL SPECIFICATIONS IN THIS DOCUMENT ARE CORRECT AT TIME OF
PRODUCTION AND ARE SUBJECT TO CHANGE. PLEASE CONTACT STARRETT
FOR FURTHER INFORMATION.
PKG08810-UMMTH550 7
INTRODUCTION
Thank you for choosing the MTH-550 Force Tester .
The MTH-550 manual tester is designed for basic tension or compression
force testing applications where precision movement is necessary. The
MTH-550 has a force capacity of 550lbf (2500N).
PRINCIPLE OF OPERATION
Rotating the handwheel moves the worm gear assembly 0.03" (0.76mm)
per revolution. The MTH-550 has a full 4" (101mm) stroke.
A DFC or DFC Force Gage mounts to the gage bracket. The gage bracket
may be moved for longer or shorter sample lengths. The force gage
measures the load as the rack assembly moves in either direction.
The handwheel assembly attaches to the column. It may be positioned
anywhere along the column.
An optional digital scale assembly (p/n MTH-SCALE) may be attached
to provide high resolution deflection measurements. The test frame
horizontally on your work surface.
SETUP FOR USE
Locate the MTH-550 tester where there is sufficient clearance for
testing and moving the lever arm.
You may permanently secure the base to the work bench using flat head
screws. Use the four corner hole locations to secure to your work bench
if desired. Remove the hole plugs to reveal the 0.25" clearance holes.
MOUNTING FORCE GAGE
The DFC or DFG Force Gage is mounted to the gage bracket using four
M4 screws.
Position the force gage on to the gage bracket so that the load cell stem
points downward. Use the force gage display “Flip option” to invert the
display. Insert and torque the four M4 mounting screws through the
gage mounting plate and into the force gage back panel. Torque the
screws to no more than 8.7 in-lb (1.0 N-m).
USING FIXTURES
Affix the test fixture to the force gage’s threaded stem and to the MTH-
550 worm gear assembly. You may use either threaded test fixtures or fit
the force gage and the test frame with the optional M10 clevis assembly
(p/n SPK-CLEVIS-L). The force gage bracket has been designed to
ensure correct centerline alignment.
Clevis Adapter SPK-CLEVIS-L
8 PKG08810-UMMTH550
ENGLISH
PERFORMING A TEST
Apply tension or compressive force on your sample by rotating the
handwheel. As you rotate the handwheel, the worm gear assembly will
move up or down. Rotating the handwheel clockwise will move the gear
upward (compression) while moving counter-clockwise will move the
gear downward (tensile).
HORIZONTAL OPERATION
You may fit the MTH-550 with optional mounting legs (p/n MLX-26030).
This allows you to position the test frame horizontally on your work surface.
OPTIONAL ACCESSORIES
ORDER NO. DESCRIPTION
MLX-PLATE-TS-100 Compression Plate, Steel, 100mm diameter
MLX-HOOK-L Hook Adapter, 550 lbf Load Capacity
SPK-CLEVIS-L Clevis Set, Stainless Steel, 550lbf, M10
SPK-MTLSCALE Digital Scale Assembly
MLX-26030 Mounting Legs, for horizontal testing
L1-Spanner Spanner Wrench for Clevis Sets
MLX-PIN-A Grip Pin, Aluminum
MLX-PIN-S Grip Pin, Stainless Steel
FORCE GAGE ADAPTER KITS
ORDER NO. DESCRIPTION
SPK-FG-CHAT Mounting Kit for Chatillon Force Gages
SPK-FG-MARK Mounting Kit for Mark-10 Force Gages
SPK-FG-SHIM Mounting Kit for Shimpo Force Gages
SPK-FG-IMAD Mounting Kit for Imada Force Gages
SPK-FG-MECM Mounting Kit for Mecmesin Force Gages
Please consult with your Starrett representative when ordering Force Gage Adapter Kits to ensure
model compatibility.
PKG08810-UMMTH550 9
ENGLISH
3.00 (76.2)
31.44
(798.5)
15.00 (381.0) Max.
15.00 (381.0) Max.
4.00 (101.6)
11.00 (279.4)
5.25 (133.4)
5.25 (133.4)
M10x1.5 - 6H 0.50
2.88 (73.0)
8.00 (203.2)
0.38 (9.5)
DIMENSIONS
10 PKG08810-UMMTH550
ENGLISH
NORTH AMERICA
WWW.STARRETT.COM
ATHOL, MA, USA, 01331-1915
EUROPE & ASIA
WWW.STARRETT.CO.UK
JEDBURGH, SCOTLAND, TD8 6LR
SOUTH & CENTRAL AMERICA
WWW.STARRETT.COM.BR
13306-900, ITU, SP, BRASIL
CNPJ 56.994.700/0001-01
CHINA
WWW.STARRETT.COM.CN
USER MANUALS AVAILABLE ONLINE
AT STARRETT.COM
PKG08810-UMMTH550 11
Inhaltsverzeichnis
Andere Starrett Prüfgeräte Handbücher
Starrett
Starrett SR160 Bedienungsanleitung
Starrett
Starrett MTH-110 Bedienungsanleitung
Starrett
Starrett SR200 Bedienungsanleitung
Starrett
Starrett SR300 Bedienungsanleitung
Starrett
Starrett MTH-330 Bedienungsanleitung
Starrett
Starrett 3840 Series Bedienungsanleitung
Starrett
Starrett SR160 Bedienungsanleitung
Starrett
Starrett SR160 Bedienungsanleitung
Starrett
Starrett DFC-2 Bedienungsanleitung
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung