StarTech.com USB2SATAIDE Bedienungsanleitung

Manual Revision: 06/18/2019

User Manual

For the latest information and specications visit

www.startech.com/USB2SATAIDE

USB 2.0 to IDE or SATA Adapter Cable

Actual product may vary from photos

SKU#: USB2SATAIDE

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiring terminations should not be made with the product and/or electric

lines under power.

• Cables (including power and charging cables) should be placed and routed

to avoid creating electric, tripping or safety hazards.

Mesures de sécurité

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit

et/ou les câbles électriques sont sous tension.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent

être placés et acheminés de façon à éviter tout risque électrique, de chute ou

de sécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le

linee elettriche sotto tensione.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati

e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o

pericoli per la sicurezza.

Säkerhetsåtgärder

• Montering av kabelavslutningar får inte göras när produkten och/eller

elledningarna är strömförda.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................2

Product Diagram ....................................................................................4

Front View.................................................................................................................................................... 4

Power Adapter ........................................................................................................................................... 5

Connector .................................................................................................................................................... 6

Introduction............................................................................................7

Package Contents ..................................................................................................................................... 7

System Requirements.............................................................................................................................. 7

Installation ..............................................................................................8

Connect a SATA Hard Drive.................................................................................................................... 9

Connecting a 40/44-pin IDE Drive ...................................................................................................... 10

Connect a SATA Hard Drive to the Power Adapter........................................................................ 11

Connect a 40-pin IDE Hard Drive to the Power Adatper............................................................. 12

Connect the Hard Drive Adapter to the Host Computer............................................................ 13

Removing Connected Drives................................................................................................................ 14

Technical Specications ........................................................................15

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

Front View

1DC Power Port 5SATA Port

2USB-A Link LED 640-Pin IDE Connector

344-Pin IDE Connector 7IDE Detect/Activity LED

4SATA Detect/Activity LED

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Power Adapter

1Power LEDs (x 2) 4LP4 Power Connector

2Power Switch (x 2) 5SATA Power Connector

3Power Connector

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Connector

1USB-A Connector

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Introduction

You can use the Adapter to copy, back up, or transfer large

amounts of data from one drive to another.

Package Contents

• USB 2.0 to SATA/IDE Adapter x 1

• SATA Data Cable x 1

• Power Adapter Breakout Cable x 1

• Universal Power Adapter (NA/JP, UK, EU, AU) x 1

• User Manual x 1

System Requirements

• Available USB 2.0 port

• Available AC electrical outlet

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Installation

Warnings: Do not disconnect any cables or power sources

while the connected hard drive(s) is/are active. This can result

in data loss and possible damage to the hard drive. To avoid

this, please follow the steps outlined in the section entitled

Removing Connected Drives.

Please ensure that the hard drive(s) has(have) been con-

nected to the Adapter prior to connecting the Adapter to the

Host Computer.

Hard drives and storage enclosures require careful handling,

especially when being transported. Be sure that you are

properly grounded by wearing an anti-static strap when

handling computer components or discharge yourself of any

static electricity built-up by touching a large grounded metal

surface (such as the computer case).

Note: If you are using two IDE hard drives concurrently, one

of the drives must be set to act as a Master Drive and the

other as Slave Drive. If you are using a 3.5” IDE hard drive and

a SATA hard drive together, the IDE hard drive must be set

to act as a Slave Drive. For further information, consult the

documentation that accompanied the hard drive(s).

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Connect a SATA Hard Drive

1. Insert one of the SATA Data Cable Connectors (included) into

the SATA Port on the Adapter.

Connecting a SATA Data Cable to the SATA Port

2. Insert the other SATA Data Cable Connector to the SATA data

port on the SATA hard drive.

Andere Handbücher für USB2SATAIDE

Inhaltsverzeichnis

Andere StarTech.com Kabel und Steckverbinder Handbücher

StarTech.com

StarTech.com SVID2USB2NS Bedienungsanleitung

StarTech.com

StarTech.com SVID2USB2NS Bedienungsanleitung

StarTech.com

StarTech.com CMDPHD2HD Bedienungsanleitung

StarTech.com

StarTech.com U02442-USB-EXTENDER Bedienungsanleitung

StarTech.com

StarTech.com SATRD30CM Bedienungsanleitung

StarTech.com

StarTech.com USB2LINK Bedienungsanleitung

StarTech.com

StarTech.com 1P3FPC-USB-SERIAL Bedienungsanleitung

StarTech.com

StarTech.com SATRD60CM Bedienungsanleitung

StarTech.com

StarTech.com SVID2USB2 Bedienungsanleitung

StarTech.com

StarTech.com ICUSB232C2 Bedienungsanleitung

StarTech.com

StarTech.com USB2SATAIDE Bedienungsanleitung

StarTech.com

StarTech.com ST124HDVW Bedienungsanleitung

StarTech.com

StarTech.com POEKIT100 Bedienungsanleitung

StarTech.com

StarTech.com ICUSB232C Bedienungsanleitung

StarTech.com

StarTech.com 35BAYPANELBK Bedienungsanleitung

StarTech.com

StarTech.com SVID2USB22 Bedienungsanleitung

StarTech.com

StarTech.com ICUSB232V2 Bedienungsanleitung

StarTech.com

StarTech.com ST122HD4KU Bedienungsanleitung

StarTech.com

StarTech.com ICUSBCPLLD25 Bedienungsanleitung

StarTech.com

StarTech.com ICUSB1284D25 Systemhandbuch

StarTech.com

StarTech.com PCMACLINK2 Bedienungsanleitung

StarTech.com

StarTech.com Spiral Cable-Management Sleeve - Black Bedienungsanleitung

StarTech.com

StarTech.com ICUSB232FTN Systemhandbuch

StarTech.com

StarTech.com ST222MX Handbuch

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung