StarTech.com NOTECONS02 Bedienungsanleitung

Manual Revision: 10/07/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

NOTECONS02

KVM Console to USB 2.0 Portable Laptop Crash Cart

Adapter with File Transfer & Video Capture

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Hardware Installation .............................................................................................................................. 3

LED Indicators............................................................................................................................................. 3

Operation ................................................................................................4

Toolbar .......................................................................................................................................................... 4

Zoom Menu................................................................................................................................................. 6

Video Menu................................................................................................................................................. 7

File Transfer Menu..................................................................................................................................... 13

Keyboard Menu ......................................................................................................................................... 15

Mouse Menu ............................................................................................................................................... 16

Toolbar Menu ............................................................................................................................................. 18

Toubleshooting ......................................................................................19

Specications..........................................................................................20

Technical Support ..................................................................................21

Warranty Information............................................................................21

Instruction Manual

Introduction

You must install the provided software on the laptop to be able to use the USB Crash

Cart Adapter. No changes are needed on the server(s) being controlled. The USB Crash

Cart Adapter can be connected or disconnected any time you wish. The software does

not need to be started rst, nor do you need to shut it down before unplugging the

USB Crash Cart Adapter.

Packaging Contents

• 1 x USB Crash Cart Adapter

• 1 x USB A to Mini-B cable

• 1 x Driver and Software USB ash drive

System Requirements

Notebook Requirements

• USB 2.0 enabled notebook computer

• 20MB available hard drive space

• 24-bit capable display

• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server

2008 R2, 2003(32/64), Mac OS 10.6 and later (Tested up to 10.10), and Linux 2.6.x -

3.13.x (32/64bit)

Server Requirements

• VGA enabled video card (DVI supported via optional DVIVGAMF adapter)

• USB keyboard and mouse support

Instruction Manual

Installation

Windows

Before installing the software on Windows, please disconnect the USB Crash Cart

Adapter and cancel any “Add new hardware”dialog windows. These windows can

interfere with the installation process.

1. Insert the provided USB ash drive and run the setup.exe installation program.

2. Proceed through the installation prompts to complete the installation.

3. Connect the USB Crash Cart Adapter to a free USB port on the notebook using the

supplied USB mini-B to A cable. The other connections to a server are not needed at

this point.

4. A message should pop-up entitled Found New Hardware.

5. Windows should nd the device driver les and install them automatically. This is a

one-time step.

6. The product is ready to be used now, and the main application may be launched

now. There is no need to reboot.

Mac OS X

Note: For Mac OSX version 10.8 or later an exception may need to be made to run

unsigned programs. To do this hold the Command key and click on the program’s icon

to open the Applications folder. Control-click or Right-click on this icon in the Finder

window and then select Open. This will enable the program to launch normally.

1. Insert the provided USB ash drive into the computer.

2. Double-click on the MacOSX-install.dmg le on the USB ash drive.

3. After a short delay to verify the disk image, a nder window will open showing

the application and a link to /Applications. Drag the main application onto the

Applications link.

4. The application is now installed and ready for use: Find it in /Applications and

double click on it to start.

5. If you would like to add this application to the Dock, you can drag and drop it from /

Applications onto the Dock.

6. Connect the USB Crash Cart Adapter to a free USB port on the notebook using the

supplied USB mini-B to A cable.

Instruction Manual

Hardware Installation

Once the drivers and software for the USB Crash Cart Adapter are installed on the

notebook computer, it can be plugged into the server.

Connect the attached VGA cable and the USB type A cable into the desired server. For

DVI-I (analog) computer systems, please use a DVI to VGA adapter (StarTech.com ID:

DVIVGAMF).

LED Indicators

Server KB/Mouse: This lights up when the emulated USB keyboard/mouse is working.

It will blink briey whenever the emulated mouse moves, or emulated key is pressed.

Constant ashing indicates some problem with the USB connection to the server. This

can happen if disconnected, or if the host’s operating system is not enumerating the

USB device.

Server VGA: This indicates a valid VGA video signal is being received. It will be

o if nothing is connected (and in some power saving modes) and may ash if an

unsupported video mode or other trouble is seen with the video signal. This light will

not turn on, regardless of the video input status, until the adapter is connected to the

application software at least once.

User Console Link/Activity: This lights up when a good connection to the laptop is

established. If ashing, it indicates the USB to the laptop is not connected or being

ignored. Blinks briey when video data is sent to the laptop.

If all the lights are o, then this means the USB Crash Cart Adapter has no power from

either USB connection. Under normal operation, either USB port can provide enough

power to operate the unit. The USB keyboard/mouse emulation is always active, even if

the laptop USB is disconnected.

USB Keyboard/mouse

VGA Video

USB 2.0

Kiosk/ATM Server RackPC

Laptop KVM Console Adapter

(NOTESONS02)

OR OR

SDFGHJKL

XCVBNM<>

QWERTYUIOP{}

1234567890-=

:; ‘“

Enter

Shift

Ctrl

Alt

Backspace

Caps Lock

Shift

Tab

Ctrl Alt

123

456

789

0/*

Enter

Del

Laptop/Netbook

Supports File Transfer

Supports Video Capture

Instruction Manual

Operation

Once connected, the real-time video from the attached host computer is shown

centered in the main window.

Toolbar

There is an optional toolbar along the top edge of the window. This toolbar may be

hidden, detached or dragged onto the other three edges of the window. It provides a

number of shortcuts and some status information. All functions are duplicated in the

pull down menus across the top of your screen, so it is optional.

You can move and/or detach the toolbar by dragging the handle on the left/top edge.

Once detached, the red X or circle in the upper corners can be used to close it. When

dragging or moving the toolbar, you can stick it (dock) to the top/bottom edge, if in

horizontal mode, or left/right edges if vertical. Some of these features are available in

the Toolbar menu as well.

The right most status area of the toolbar reports some statistics while the system is

running. The rst number is the USB bandwidth, in bits per second. When no motion is

detected by our hardware video compression, no bits are sent. Noisy video cards and

ongoing video animations, will cause a constant stream of USB trac.

The next two numbers (ex. 30Hz and 44fps) report the achieved frame rates for the

hardware and software components respectively. The hardware number (Hz) will range

from 1 to 85Hz, but is typically 30Hz or 60Hz. The software number is limited to 60 fps

(frames per second) maximum and varies depending what other software on your

laptop is doing.

Instruction Manual

From left to right:

1. Change orientation of tool bar between horizontal (shown) and vertical.

2. Quit the Pocket Console application immediately.

3. Fine-tune video picture.

4. Open Video-related settings window.

5. Take a screenshot, save as PNG, JPG, BMP le.

6. Record (Video Capture)

7. Loop Record (Video Capture)

8. Play previously recorded video

9. Pause playback

10. Make a Movie (.avi le) out of previously recorded video

11. Toggle full-screen vs. windowed mode.

12. Go to 100% zoom, or largest possible.

13. (50%) Shows current zoom factor as a percentage.

14. Disk control (le transfer) icon

15. Keyboard status (red X shown if there is an issue). Click to open special keys window.

16. (USB) USB mode for keyboard.

17. Caps lock indicator/button (green if active, shown inactive). Click to simulate

pressing caps lock.

18. Num lock indicator/button.

19. Scroll lock indicator/button.

20. Send Ctrl-Alt-Del to the server.

21. Status area. Shows USB bandwidth, hardware and software frame rates.

Instruction Manual

Zoom Menu

In the Zoom menu there are a number of options to set the zoom factor and resize the

window to achieve that zoom factor. For example, if the attached server is running at

XGA resolution (1024 x 768), and you select 50% zoom, the main window will be set to

a size of approximately 512 x 384.

Note: Please keep in mind that not all zoom factors will be possible, as some notebook

screens are too small for the larger percentages. If so, the software will resize to the

largest window possible.

Since many notebooks have smaller screens, you may wish to run this program

maximized. Full-screen mode is supported, where the window decorations are

removed and other applications are hidden. Click on the full-screen/window icon ( )

on the toolbar or select it from the Zoom menu.

To get out of full screen mode, click the icon again. If the toolbar is disabled when you

enter full-screen mode, a smaller toolbar is provided with only the Fullscreen and Quit

options. This toolbar oats and may be moved out of your way, but cannot be hidden

completely.

Also in the Zoom menu is an option to center the window on the screen. This can

be handy when it is o the edge of the screen. There is also a shortcut for maximize

(toggle). This is the same as clicking the maximize button in the title bar of the main

window.

Other Notes

• If the laptop is widescreen (16:10 aspect, or 1280x800, etc), it may be helpful to

locate the toolbar along the left or right vertical edge. This provides more usable

screen height, and if the server’s screen is square (4:3 aspect) the left and right

vertical edges would not be used.

• This program will not enlarge video, only shrink it. Therefore, text mode

(720x480 or similar) will not be enlarged to ll your screen.

• The toolbar is automatically disabled when you select a Zoom factor below 50%.

You need to enable it manually when you return to a larger size.

• Unusable parts of the window are shown in grey. This happens because the video is

scaled by an integer factor of 1/16 and due to other rounding issues.

Instruction Manual

Video Menu

There are a number of options available under the Video menu, including: Auto ne-

tune picture, Video Settings, Video capture and Save PNG snapshot.

Auto ne-tune picture

Use to automatically adjust the sampling phase of the video. This makes the picture

sharper and reduces USB trac. This is generally not required since this operation is

automatically performed when video is applied. The picture will freeze for about one

second while the calibration is performed.

Video Settings

Picture Positioning - These four arrows may be used to ne-tune the position of the

video image, similar to the centering controls found on video monitors. The adjusted

values will be used automatically whenever this same video mode is seen again. The

Auto button will attempt to automatically center the video image within the program

window. Click Save to keep your changes.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere StarTech.com LCD-Schublade Handbücher

StarTech.com

StarTech.com RKCOND17HD Series Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1501GB Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1901 Series Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1901 Series Bedienungsanleitung

StarTech.com

StarTech.com 1UCABCONS Bedienungsanleitung

StarTech.com

StarTech.com RKCOND17HD Series Bedienungsanleitung

StarTech.com

StarTech.com 1UCABCONS Bedienungsanleitung

StarTech.com

StarTech.com RKCONS17HD Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1908K Bedienungsanleitung

StarTech.com

StarTech.com DRW150SAT Handbuch

StarTech.com

StarTech.com RACKCONS1716 Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1916K Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1916K Bedienungsanleitung

StarTech.com

StarTech.com RACKCOND17HD Bedienungsanleitung

StarTech.com

StarTech.com SCSIU3WDRWR Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1501 Bedienungsanleitung

StarTech.com

StarTech.com RACKCOND1701 Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1908K Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1916K Bedienungsanleitung

StarTech.com

StarTech.com RKCONS1908K Bedienungsanleitung

StarTech.com

StarTech.com 1U Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1708 Bedienungsanleitung

StarTech.com

StarTech.com RKCONV1701 Series Bedienungsanleitung

StarTech.com

StarTech.com SV231USBLC Bedienungsanleitung

Beliebte LCD-Schublade Handbücher anderer Marken

Acnodes

Acnodes KD 8228 Bedienungsanleitung

Ameriwood

Ameriwood 9524328PCOM Bedienungsanleitung

Kesseböhmer

Kesseböhmer TANDEM solo Bedienungsanleitung

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Bedienungsanleitung

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Bedienungsanleitung

NTI

NTI RACKMUX-V17-N Bedienungsanleitung

Austin Hughes

Austin Hughes CyberView L120 Bedienungsanleitung

Uplift Desk

Uplift Desk STR018 Bedienungsanleitung

Acnodes

Acnodes KDC 81932 Bedienungsanleitung

Acnodes

Acnodes RK1200T Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

GRASS

GRASS DWD XP Bedienungsanleitung

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Bedienungsanleitung

Fujitsu

Fujitsu RC25 Bedienungsanleitung

Acnodes

Acnodes RK 1000B Bedienungsanleitung

I-Tech

I-Tech RKP115 Bedienungsanleitung

iTech Company

iTech Company AMil-1900-D12e-AC Bedienungsanleitung