StarTech.com SVID410IR Bedienungsanleitung

Video Switch

SVID410IR Instruction Manual

Actual product may vary from photo

4-to-1 Composite/S-Video & RCA Audio Switch with Remote Control

FFCCCCCCoommpplliiaanncceeSSttaatteemmeenntt

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

UUsseeooffTTrraaddeemmaarrkkss,,RReeggiisstteerreeddTTrraaddeemmaarrkkss,,aanndd

ootthheerrPPrrootteecctteeddNNaammeessaannddSSyymmbboollss

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and

do not represent an endorsement of a product or service by StarTech.com, or an

endorsement of the product(s) to which this manual applies by the third-party company in

question. Regardless of any direct acknowledgement elsewhere in the body of this

document, StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this

manual and related documents are the property of their respective holders.

TTaabblleeooffCCoonntteennttss

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Connecting Devices to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Using the Video Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Using the Remote Learning Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Accessory Products from StarTech.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Instruction Manual

IInnttrroodduuccttiioonn

Thank you for purchasing a StarTech.com video switch. This product allows you to

connect up to four A/V devices that have composite or S-Video output to a display using

a single set of inputs. You can use either the front panel selection button or the included

remote control to switch between devices. This product is perfect for use with DVD

players, VCRs, game consoles and other video devices when you have a limited number

of inputs available on your TV or other display.

FFeeaattuurreess

• Connect up to four devices to your TV using a single set of inputs

• Includes an easy-to-use remote control for easy switching between devices

• You can program the video switch to work with your existing universal remote

• Maintains clear audio and video signals for excellent performance

BBeeffoorreeYYoouuBBeeggiinn

System Requirements

• A display that has at least one set of inputs that accommodate RCA audio and either

composite video or S-Video

• A set of cables for each device to be connected to the switch that use RCA audio and

either composite video or S-Video

• A set of cables to connect the switch to the display, using RCA audio and either

composite video or S-Video

Contents

This package should contain:

• Video switch (1)

• Remote control (1)

• Instruction manual (1)

Instruction Manual

IInnssttaallllaattiioonn

These instructions assume that the display has at least one available set of inputs that

use RCA audio and either composite video or S-Video, and that all the devices have their

cables attached. You may need to disconnect an existing device from the display to

make an input available and re-connect that device using the video switch.

Connecting Devices to the Switch

NOTE: The video switch does not convert between S-Video and composite video signals.

These instructions assume that all devices connected to the switch use the same

connection that the switch will use to connect to the display (i.e. the switch connects to

the S-Video input on a television, so all devices will be connected to the switch using S-

Video). If you wish to mix both composite video and S-Video connections for different

devices connected to the video switch, your display must have both S-Video and

composite video connectors on the same input (i.e. the connectors marked A/V 1 or

similar), and you must connect both the S-Video and composite outputs from the switch

to your display.

1. Place the switch near the display and the devices you wish to use with the switch.

2. Connect the first device (VCR, DVD player, etc.) to the set of connectors labeled A/V

IN1 on the back of the switch. RCA audio has two inputs (left/right, marked as white

and red, respectively). Connect the sound cables from the device to the switch.

Connect either the composite video (yellow) cable or the S-Video (4 pin) from the

device to the switch. Do not connect both a composite and S-Video cable from a

device to the same port on the video switch.

3. Connect up three additional devices following the instructions in step 2.

4. Connect RCA audio cables and either a composite video or S-Video cable to the ports

labeled OUTPUT on the video switch. Connect the opposite end of those cables to

the appropriate connectors on the display (normally marked as A/V IN or similar). If

you are mixing S-Video and composite video devices on the video switch as described

in “NOTE” above, you must connect both a S-Video and composite video cable from

the OUTPUT connectors on the video switch to the same input on the display.

5. Connect the power adapter (provided) to the port marked DC 9V on the video switch.

Connect the opposite end to a wall outlet or other suitable power source.

The video switch is now ready to use.

Instruction Manual

Using the Video Switch

Once you have connected devices to the video switch, you can proceed to test the

connection to the television or other display. Turn on the display, and select the input to

which you connected the video switch. Consult the documentation for your display if you

are unsure on how to select A/V inputs. Usually, there will be a button on the display’s

remote or front panel labeled INPUT or A/V. If the display has multiple inputs, you will

need to ensure the input you have selected corresponds to the connectors on the

television you used for the switch. A red LED indicator will light on the front panel of the

switch to show which device is active.

Power on all the devices you connected to the video switch. You should now be able to

use the buttons on the video switch remote to select a device by pressing a button on the

remote (1/2/3/4) and the image from that device should be displayed on the screen. As

an alternative to using the remote, you can also press the SELECT button on the front of

the switch to change active inputs on the switch.

Using the Remote Learning Feature

If you prefer, you can use an existing universal remote with this product. You can

program the video switch to select an input using the signal from any remote.

1. Press and hold the SELECT button on the video switch for a minimum of 5 seconds.

The LED indicator for input 1 will flash on the video switch when you release the

button.

2. Aim your universal remote at the video switch. Press the key on the remote that

corresponds to the key you want to use to select input 1 on the video switch. Once

the video switch has stored that setting, the LED indicator for input 2 will flash on the

video switch.

3. Repeat this process for inputs 2, 3, and 4. When the process is complete, the video

switch will automatically return to the input you selected before entering Learn Mode.

To abort the programming at any time, press the SELECT button once.

Instruction Manual

LED Indicator

Selection Switch

Troubleshooting

If you’re having difficulty using the video switch, try the following solutions based on the

nature of the problem.

None of the devices connected to the video switch are displayed on the screen.

1) Ensure the video switch is plugged in and receiving power. One LED indicator

on the front panel will be lit when the switch is receiving power.

2) Try selecting another input on the display and verify which input the switch is

connected to. Most displays will have their A/V inputs marked with a number, so

ensure the input selected on the screen matches the physical connection between the

switch and the display.

3) Verify cable connections between the video switch and display are snug.

Some of the devices connected to the switch do not appear on the display when they are

connected

1) Ensure the device you selected is powered on and that it has media inserted (if

applicable: tape, DVD, etc.). If needed, press play on the device to ensure an image

is displayed.

2) Ensure that all the cable connections between devices and the switch are correct and

snug. Also ensure that the device is connected to the set of inputs that you selected

on the switch.

Video or audio quality is poor.

1) Ensure the connections between the devices and the switch, and the switch and the

display, are snug.

2) Try using a higher quality A/V cable to make the connection between the devices and

the switch for the best possible performance.

Instruction Manual

AAcccceessssoorryyPPrroodduuccttssffrroommSSttaarrTTeecchh..ccoomm

Contact your local StarTech.com dealer or visit www.startech.com for cables or other

accessories that will help you get the best performance out of your new product.

COMPHQ3

3 ft Premium Composite Video Cable

COMPHQ6

6 ft Premium Composite Video Cable

COMPHQ12

12 ft Premium Composite Video Cable

COMPAAHQ3

3 ft Premium Composite+RCA Audio Cable

COMPAAHQ6

6 ft Premium Composite+RCA Audio Cable

COMPAAHQ12

12 ft Premium Composite+RCA Audio Cable

AUDIORCA3

3 ft Premium RCA Audio Cable

AUDIORCA6

6 ft Premium RCA Audio Cable

AUDIORCA12

12 ft Premium RCA Audio Cable

SVIDAAHQ3

3 ft Premium S-Video+RCA Audio Cable

SVIDAAHQ6

6 ft Premium S-Video+RCA Audio Cable

SVIDAAHQ12

12 ft Premium S-Video+RCA Audio Cable

SVIDHQ3

3 ft Premium S-Video Cable

SVIDHQ6

6 ft Premium S-Video Cable

SVIDHQ12

12 ft Premium S-Video Cable

Instruction Manual

TTeecchhnniiccaallSSuuppppoorrtt

StarTech.com’s lifetime technical support is an integral part of our commitment to provide

industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

WWaarrrraannttyyIInnffoorrmmaattiioonn

This product is backed by a one-year warranty. In addition, StarTech.com warrants its

products against defects in materials and workmanship for the periods noted, following

the initial date of purchase. During this period, the products may be returned for repair, or

replacement with equivalent products at our discretion. The warranty covers parts and

labor costs only. StarTech.com does not warrant its products from defects or damages

arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

officers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential

damages. If such laws apply, the limitations or exclusions contained in this statement

may not apply to you.

Instruction Manual

Revised: 8 August 2005 (Rev. A)

AAbboouuttSSttaarrTTeecchh..ccoomm

StarTech.com is “The Professionals’ Source for Hard-to-Find Computer

Parts”. Since 1985, we have been providing IT professionals with the

quality products they need to complete their solutions. We offer an

unmatched selection of computer parts, cables, server management

solutions and A/V products and serve a worldwide market through our

locations in the United States, Canada, the United Kingdom and Taiwan.

Visit www.startech.com for complete information about all our products

and to access exclusive interactive tools such as the Parts Finder and the

KVM Reference Guide. StarTech.com makes it easy to complete almost

any IT solution. Find out for yourself why our products lead the industry in

performance, support, and value.

Inhaltsverzeichnis

Andere StarTech.com Schalten Handbücher

StarTech.com

StarTech.com SV441HDIE Bedienungsanleitung

StarTech.com

StarTech.com ST4202USB Systemhandbuch

StarTech.com

StarTech.com SV211KDVI Bedienungsanleitung

StarTech.com

StarTech.com IES81GPOEW Bedienungsanleitung

StarTech.com

StarTech.com MSTDP122DP Bedienungsanleitung

StarTech.com

StarTech.com USB421HS Bedienungsanleitung

StarTech.com

StarTech.com SV231DVIUDDM Bedienungsanleitung

StarTech.com

StarTech.com DS154 Systemhandbuch

StarTech.com

StarTech.com DS52000 Bedienungsanleitung

StarTech.com

StarTech.com ST4200MINI Handbuch

StarTech.com

StarTech.com C2-D46-UAC-CBL-KVM Bedienungsanleitung

StarTech.com

StarTech.com HB30C4AIB Bedienungsanleitung

StarTech.com

StarTech.com SV431HDU3A2 Bedienungsanleitung

StarTech.com

StarTech.com STARVIEW SV215MICUSBA Bedienungsanleitung

StarTech.com

StarTech.com POEINJ4G Bedienungsanleitung

StarTech.com

StarTech.com VS721MULTI Bedienungsanleitung

StarTech.com

StarTech.com DisplayPort MSTDP124DP Bedienungsanleitung

StarTech.com

StarTech.com 5G4AINDNP-USB-A-HUB Bedienungsanleitung

StarTech.com

StarTech.com VS410RVGAA Bedienungsanleitung

StarTech.com

StarTech.com SV831DVIU Bedienungsanleitung

StarTech.com

StarTech.com IES1G52UPDIN Bedienungsanleitung

StarTech.com

StarTech.com MSTDP124DP Bedienungsanleitung

StarTech.com

StarTech.com ST4200USB Handbuch

StarTech.com

StarTech.com ICUSB23216F Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung