iSTS G –User Manual Page 3
1. SAFETY INSTRUCTIONS
1.1 Introduction
Some aspects of this manual contents may differ to the equipment as supplied due to technical improvements, specific
model variations etc. If in any doubt in respect to the procedures and safety issues consult the manufacturer and do not
proceed until clarification is received.
This manual contains important instructions that should be followed and fully understood before proceeding and
commissioning and operation to prevent harm to personnel and equipment.
Installation and commissioning should be carried out only by qualified and experienced electricians. The iSTS should be
operated by technically qualified personnel that are authorized, experienced, and have knowledge and understanding
of the equipment and the critical loads, using the documented procedures.
Read this whole document thoroughly. Understand every aspect before proceeding. Request further assistance if you do
not understand any aspect of the operation of the iSTS. Support and contact numbers are at the end of the manual.
These instructions cover normal operation in the automatic as well as in manual modes. Special operating conditions,
such as short circuit tests, input supplies, etc., are not covered in this document. These operations require comprehensive
knowledge of the overall system and should be carried out by properly qualified, skilled, and competent service
personnel only.
1.2 Transport, Storage, Unpacking
Procedure for Receiving Shipment:
▪If the ShockWatch indicator is RED, it does not mean that damage has occurred, it only indicates that the
carton received an impact or movement. If the indicator on the label is RED, make a notation to that effect on
the bill of lading or delivery receipt or document. Examine contents immediately for possible damage. If
damage is discovered, inform carrier immediately and follow normal procedure for a carrier inspection and
filing of a concealed damage claim.
▪If the packaging is damaged unpack carefully and inspect the unit. We recommend that if there is any sign of
mechanical damage that the unit not be powered up; but, returned for re-processing.
▪If damage is discovered, inform carrier immediately and follow normal procedure for a carrier inspection and
filing of a concealed damage claim to the courier or your insurance company.
▪Take a picture of the carton and contents as a record.
▪If the packaging is OK, then please keep the packaging in a secure place in case the unit needs to be returned
for repair.
