Stauer Enduro Bedienungsanleitung
WATCH DISPLAY TIMESETTING
A - START/STOP B TTON
B - CROWN
C - RESET B TTON
D - REAL-TIME/MODE B TTON
E - BACKLIGHT B TTON
the following sequence by pressing the
Start/Stop Button (part A):
– Second
– Minute
– Hour
– 12/24 hour format
– Month
– Day
– Week
3. Press the Reset Button (part C) to
return to Real Time mode.
TO SET THE CHRONOGRAPH
The display range of the hronograph is
23 hours, 59 minutes and 59.99 se onds.
1. To start the Chronograph feature, press
the Start/Stop Button (part A).
2. Once stopped, press the Reset Button
(part C) to reset to zero.
2. Press the Reset Button (part C) again to
finish setting.
3. Press the Start/Stop Button (part A) to
start and stop counting, and press the
Reset Button (part C) to stop.
4. Timer alarm sounds for 10 seconds
when counting down to 0:00:00. The
timer is automatically reset to its start-
ing value after the alarm stops.
TO SET THE DAILY ALARM/CHIME
1. Press the Start/Stop Button (part A)
to turn the alarm and the chime on/off.
2. Press and hold the Reset Button (part
C) for two seconds to select the hour set-
ting. Press the Real-Time/Mode Button
(part D) to select the minute setting.
Press the Start/Stop button (part A) to
adjust the flashing item.
®
INSTR CTION MAN AL
Stauer Enduro Hybrid Watch
3. To record split times, press the Reset
Button (part C) while the Chrono is
running to turn the split timer on/off.
4. To stop coutning, press the Start/Stop
Button (part A).
5. To reset (set to zero) the split time display
press the Reset Button (part C).
6. To exit the Chronograph mode press
the Real-Time/Mode Button (part D) –
watch will return to the real-time mode.
TO USE THE STOPWATCH
The display range of the timer is 23
hours, 59 minutes and 59 se onds.
1. Press and hold the Reset Button (part
C) for two seconds to select the hour
setting. Press the Real-Time/Mode
Button (part D) to select the minute set-
ting. Press the Start/Stop Button (part A)
to adjust the flashing item.
3. The alarm will sound for 20 seconds
when set time is reached.
DUAL TIME SETTING
1. In the Dual Time mode, press and
hold the Reset Button (part C) for two
seconds to select the minute setting.
Press the Real-Time/Mode Button (part
D) to select hour setting. Press the
Start/Stop Button (part A) to adjust the
flashing item.
2. Press the Reset Button (part C) again to
finish setting and to return to Dual Time
display mode.
DUAL TIME SETTING
Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
www.stauer. om
CHRONOGRAPH SETTINGS STOPWATCH SETTING
This watch features hour, minute,
second, month, date, and day of
the week displays.
TO SET THE TIME – HOUR,
MINUTE AND SECOND HANDS
1. Pull the crown (part B) out to
position “1” and rotate it to the
desired time.
2. Once the correct time is set, push
the crown back into original “0”
(zero) position.
TO SET THE TIME –
DIGITAL DISPLAY
1. Press the Reset Button (part C)
for two seconds and then press
the Start/Stop Button (part A) to
zero.
2. Press the Real-Time/Mode Button
(part D) three times. The seconds
display will blink. Select an item in
D.
E. A.
C.
B.
DUAL TIME SETTING
- Digital chronograph and analog functions
- Stainless steel back
- Luminescent hands
- Electroluminescence backlight
(EL Backlight)
- Daily alarm function
- Black silicone strap
- Water resistant to 3 ATM
FEATURES
QuadFold_EnduroHybr d_Layout 1 8/15/13 9:54 AM Page 1
Andere Stauer Betrachten Handbücher
Stauer
Stauer 1926 Bedienungsanleitung
Stauer
Stauer Titan Bedienungsanleitung
Stauer
Stauer NOIRE Bedienungsanleitung
Stauer
Stauer Titanium Atomic Watch Bedienungsanleitung
Stauer
Stauer 17469 Bedienungsanleitung
Stauer
Stauer 15442 Bedienungsanleitung
Stauer
Stauer 1779 Skeleton Watch Bedienungsanleitung
Stauer
Stauer Flyboy 1916 Bedienungsanleitung
Stauer
Stauer 19093 Bedienungsanleitung
