STEAMONE H3S Bedienungsanleitung

Garment Steamer

User Guide

H3S

Thank you for choosing this SteamOne product.

Please read this manual in its entirety before operating this appliance.

Keep this user guide in a safe place for future reference.

TABLE OF CONTENTS

English Version

………………..………………………………………….……………..…….1

Safety Instructions………………………………………………………………………………….

Unpacking…………………………………………………………………………………………….6

Garment steamer H3S Overview……………………………………………….……..6

Before Use………………………………………………………………………………………………7

Garment steamer assembly……………………………………………………..………7

Pole assembly………………………………………………………..…………..…7

Locking the pole……………………………………………………………………7

Hose & Steam head assembly…………………………………………………7

Filling the water tank………………………………………………………………….….8

Use………………………………………………………………………………………………………9

Start…………………………………………………………………………………………..…9

Proper use………...……………………………………………………………………....10

Accessories………………………………………………………………………………….11

Trouser stretcher…………………………………………………………………11

Fabric brush & Creasing tool…………………………………………………12

After use………………………………………………………………………………………………13

Transport……………………………………………………………………………………………..13

Maintenance………………………………………………………………………………………….13

Troubleshooting…………………………………………………………………………………..15

Circuit diagram……………………………………………………………………………………..16

Models & Specifications………………………………………………………………………….16

Warranty………………………………..…………………………………………………………….17

French version

…………………………………………………………………….…….……21

Spanish version

……………….……………………………………..……………………… 1

SAFETY INSTRUCTIONS

This product is listed by U . Representative samples of this product have been

evaluated by U and meet applicable safety standards.

The voltage of your electrical installation must correspond to that

of the appliance (120V). Connecting to the wrong voltage may

cause irreversible damage to the appliance and will invalidate the

guarantee.

ALWAYS FOLLOW THESE IMPORTANT SAFETY

INSTRUCTIONS BEFORE USING:

-Do not use this appliance for purposes other than what it was intended for.

-To reduce the risk of burns from hot water or steam, always hold the steam

head away from your body during operation.

-To avoid electric shock, never immerse the appliance in water or any other liquid.

-Always turn the appliance «OFF» before plugging it in to, or removing it from the

outlet. Grasp the plug and pull to remove it from the outlet; never pull on the

cord. Do not operate the appliance if the power cord is damaged.

-Disconnect the appliance from the electrical outlet when filling the water tank,

emptying or when not in use. Fill only the water tank with water; do not pour

directly into the water reservoir.

-Never point the steam head at people or animals, or steam the garment while

wearing.

-Use caution when using the appliance near children; never leave children

unattended near the appliance.

-et the appliance cool completely before storage and do not allow the power

cord to touch hot surfaces.

-This appliance has a polarized plug and will fit into a polarized outlet only one

way. If the plug does not fit in to the outlet, reverse the plug and try again. To

minimize the risk of electric shock do not force the plug in to the outlet; do not

alter the plug in any way. If it does not fit, try another outlet or contact a

qualified electrician.

-Do not operate the appliance if it has been dropped or damaged.

-To avoid the risk of injury, fire or electric shock, do not attempt to disassemble

or repair the appliance; take it to a qualified service center for repair.

-Use caution when emptying the water tank after use; water in the tank may be

hot. Do not touch metal parts until the unit has cooled to avoid the risk of burns;

use caution when changing attachments, they may be hot or contain hot water.

-Always keep the hose and nozzle elevated above the water tank.

Steam in an up and down vertical motion. Using the steamer in a horizontal

position or tilting it back may result in hot water discharge.

Always hang the steam head on the head support/ho

head on the floor, furniture or lay it on the power cord while it is hot or plugged

in as this may result in fire or electric shock.

Never drop or insert objects into the hose or any of the openings.

The use of accessories and attachments other than those provided by SteamOne

is not recommended and may result in fire, electric shock or personal injury.

This unit is for indoor use only.

Do not cut or attempt to extend the steaming hose.

-To

prevent

overheating of the appliance, please be sure that the telescopic rod is

extended to its highest position before hanging clothes on the garment hook for

steaming.

Do not allow the steamer to run dry.

SPECIAL INSTRUCTIONS

-To avoid a c

ircuit overload, do not operate

the same circuit.

If necessary, use an extension cord specifically designed for appliances, leeser

cords may overheat.

SAVE THESE INSTRUCTIONS

Environmental

Responsibility

- Your

appliance contains materials that can be recovered or

recycled.

When disposing of it, take it to a recycling center or approved

service center.

Steam in an up and down vertical motion. Using the steamer in a horizontal

position or tilting it back may result in hot water discharge.

Always hang the steam head on the head support/ho

ok. Never place the steam

head on the floor, furniture or lay it on the power cord while it is hot or plugged

in as this may result in fire or electric shock.

Never drop or insert objects into the hose or any of the openings.

The use of accessories and attachments other than those provided by SteamOne

is not recommended and may result in fire, electric shock or personal injury.

This unit is for indoor use only.

Do not cut or attempt to extend the steaming hose.

overheating of the appliance, please be sure that the telescopic rod is

extended to its highest position before hanging clothes on the garment hook for

Do not allow the steamer to run dry.

SPECIAL INSTRUCTIONS

ircuit overload, do not operate

another high wattage

If necessary, use an extension cord specifically designed for appliances, leeser

cords may overheat.

SAVE THESE INSTRUCTIONS

Responsibility

appliance contains materials that can be recovered or

recycled.

When disposing of it, take it to a recycling center or approved

service center.

Steam in an up and down vertical motion. Using the steamer in a horizontal

ok. Never place the steam

head on the floor, furniture or lay it on the power cord while it is hot or plugged

Never drop or insert objects into the hose or any of the openings.

The use of accessories and attachments other than those provided by SteamOne

is not recommended and may result in fire, electric shock or personal injury.

overheating of the appliance, please be sure that the telescopic rod is

extended to its highest position before hanging clothes on the garment hook for

another high wattage

appliance on

If necessary, use an extension cord specifically designed for appliances, leeser

appliance contains materials that can be recovered or

When disposing of it, take it to a recycling center or approved

Unpacking

As you unpack your garment steamer, check to make sure that all items shown below

are included.

If anything is missing, contact Steamone at steamoneinfo@qbproducts.com

Garment Steamer H3S Overview:

Description:

a Base k Folding Hanger

b ON/OFF Switch & Power Selection Dial l Trouser Stretcher

c Removable Water Tank m

Head Support & Hook

d Pole Fastening ock n

Fabric Brush & Creasing Tool

e Telescopic Pole

f Pole Fastening Screw

g Handle

h Steam Head

i Hose

j Hose Connector

fig.1

fig.2

Locking the pole:

1. Adjust the pole to its maximum height by sliding it upwards

then tightening up the three screws. (fig.6)

2. Insert vertically the hanger into the hook until it is firmly

fixed. (fig.7)

3. Place the head support/hook on the top of the pole and push

down to secure. (fig.7)

fig.6

fig.7

fig.8 fig.9

fig.3

fig.6

fig.5

Before Use

Garment steamer assembly

Hose & Steam head assembly:

1. Push the hose connector into the base until

resistance is felt. ock the connector by turning

clockwise. (fig.8 & fig.9)

2. Hang the steam head on the head

support/hook. (fig.1)

Pole assembly:

1. Place the base on the floor and remove the

water tank. (fig.3)

2. Unscrew the fastening lock from the base of

the steamer. (fig.4)

Insert the pole and tighten the pole’s fastening

lock by turning in a clockwise direction until

the fastener is securely in place. (fig.5)

fig.

fig.11

fig.13

fig.10

fig.12

Lift the water tank to make

sure there is water in the

reservoir. (fig.13)

After checking the reservoir,

replace the water tank on

the base.

Filling the water tank

Never use water that contains additives (starch, perfume,

aromatic substances, softener...) in the steamer. Additives can

affect the properties of steam, corrode internal parts and lead to

the formation of deposits.

Always check to be sure that the water tank is full before using

your garment steamer.

1. Ensure that the steamer is unplugged. Remove the

water tank from the base of the appliance by

pulling the handle upwards. (fig.10)

2. Unscrew the cap located at the bottom of the tank

and fill with water. (fig.11)

3. Replace the cap and place the water tank back on

to the base. (fig.12)

The steamer can be used with tap water. If

the water in your area is hard, Steamone

recommends you that use distilled or

demineralized water to reduce scaling.

fig.1

fig.15

fig.16-a fig.16-b

Use

Start

Never steam a garment while it is being worn. The hose and

steam head may become hot during use. This is perfectly normal.

Be careful to avoid contact with the steam head to avoid burns.

Operate the steamer on a flat surface clear of materials that may

obstruct openings at the base of the steamer.

Put garment onto the

folding hanger. (fig.16-a)

For quick steaming, you

can also use your own hanger on

the hook. (fig.16-b)

If necessary, expand the pole to the desired height by

unlocking it, pulling it gently and locking it again.

-Plug in the power cord and turn on the power button.

The steamer is operating.(fig.14)

-Depending on the model, the amount of steam can be

adjusted by selecting the setting using the dial located

on the steamer base.

-The unit will produce steam in 60 seconds at maximum

wattage.

Steamone recommends that you wait 2

minutes to reduce condensation on the steam head

and get the best performance from your steamer.

(fig.15)

fig.17

fig.19

fig.20 fig.21

fig.18

Proper Use

Grasp the steam head with the steam vents pointing away from you.

-Start steaming by touching material lightly with steaming head and moving in

an up/down vertical motion.

-The steam head must be in contact with the garment. (fig.17)

-The garment must be stretched while steaming.

-You can use the trouser stretcher (fig.22 –page.11) or simply use your free

hand to stretch the garment. (fig.19)

-Always steam in a vertical position. (fig.20)

-Never try to steam the garment in a horizontal position. (fig.21)

Inhaltsverzeichnis

Sprachen:

Andere STEAMONE Dampfglätter Handbücher

STEAMONE

STEAMONE H8S Bedienungsanleitung

Beliebte Dampfglätter Handbücher anderer Marken

Steamfast

Steamfast SF-425 Bedienungsanleitung

Steamfast

Steamfast SF-445 Bedienungsanleitung