Steinbach Waterpower 5000 Bedienungsanleitung

IRUWRGD\µVOLIHVW\OH

User manual

speedheat

Waterpower 5000

speedheat

Art.Nr.: 00-49200 / BP-50HS-A

speedheat

Waterpower 8500

speedheat

Art.Nr.: 00-49205 / BP-85HS-A

Speedheat Waterpower page 3 of 44

IRUWRGD\µVOLIHVW\OH



Nome file: 7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 3-di/of 32

Contents.

1. General warnings and information for the addressee. .........................................................5

1.1. Service Processing ..................................................................................................................5

1.2. Warranty...............................................................................................................................6

1.2.1. General conditions. .....................................................................................................6

1.2.2. Special conditions........................................................................................................6

1.2.3. Restrictions. .................................................................................................................6

1.3. Symbol key...........................................................................................................................7

1.4. Safety regulations for heated pools.....................................................................................7

1.5. Energy savings. ...................................................................................................................7

1.6. General information. ............................................................................................................7

1.7. Definitions. ...........................................................................................................................8

2. Product presentation. ...............................................................................................................8

2.1. Product scope. .....................................................................................................................8

2.2. Composition. ........................................................................................................................9

3. Technical specifications.........................................................................................................10

4. Installation................................................................................................................................11

4.1. Inspection...........................................................................................................................11

4.2. Handling. ............................................................................................................................11

4.3. Positioning..........................................................................................................................11

4.3.1. Support and its location.............................................................................................11

4.3.2. Necessary clearance.................................................................................................12

4.3.3. Noise wave echo. ......................................................................................................12

4.4. Disposal. ............................................................................................................................12

4.4.1. General instructions. .................................................................................................12

4.4.2. Heat pump decommissioning....................................................................................12

4.4.3. Electric/electronic waste disposal. ............................................................................13

4.5. Hydraulic connections........................................................................................................13

4.5.1. Warnings....................................................................................................................13

4.5.2. Installation hydraulic layout. ......................................................................................13

4.6. Electrical connections. .......................................................................................................14

4.7. Commissioning, preliminary checks. .................................................................................15

4.7.1. Commissioning, precautions. ....................................................................................15

4.7.2. First start-up, preliminary checks. .............................................................................15

5. Operations and use.................................................................................................................16

5.1. Introduction. .......................................................................................................................16

5.2. Control panel use...............................................................................................................16

5.2.1. Turning on the heat pump. ........................................................................................16

5.2.2. Standby......................................................................................................................16

5.2.3. Turning off the heat pump. ........................................................................................16

5.2.4. Starting the heat pump. .............................................................................................17

5.2.5. Operating mode selection. ........................................................................................17

5.2.6. Set temperature regulation........................................................................................17

5.2.7. Minimum working temperature and restart temperature. .........................................17

5.2.8. Automatic start settings. ............................................................................................18

5.2.9. Automatic standby settings. ......................................................................................18

5.2.10. Manual defrost...........................................................................................................19

5.2.11. Key lock. ....................................................................................................................19

5.2.12. Sensor temperature display. .....................................................................................19

5.3. Manometer use. .................................................................................................................20

6. Control and safety devices. ...................................................................................................21

6.1. Control devices. .................................................................................................................21

6.1.1. Ambient and pool temperature sensors. ...................................................................21

6.1.2. Flow sensor. ..............................................................................................................21

6.2.

Safety devices....................................................................................................................21

Speedheat Waterpower page 4 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 4-di/of 32

6.2.1. Compressor and plate heat exchanger temperature sensors. .................................21

6.2.2. High pressure sensor. ...............................................................................................21

6.2.3. Low pressure sensor. ................................................................................................22

7. Routine, scheduled and extraordinary maintenance. .........................................................23

7.1. User controls. .....................................................................................................................23

7.2. Specialised technician controls. ........................................................................................23

7.3. Winter protection................................................................................................................23

7.4. Spring commissioning........................................................................................................23

7.5. Troubleshooting. ................................................................................................................23

8. Spare parts. ..............................................................................................................................27

Speedheat Waterpower page 5 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 5-di/of 32

1. General warnings and information for the addressee.

1.1. CE declaration.

Business name:

Shott International S.r.l.

Via delle Pezze, 35

35013 CITTADELLA (PD) - ITALY

Tel. +39 049-9401150

Fax. +39 049-9409140

C.F. 03529990289– P.IVA 03529990289

Cap. Soc.  250.000,00 i.v. – R.E.A. n. 317778

Iscritta al n. 03529990289 Reg. Imprese di Padova

e-mail: info@shott.it

http:\\www.shott.it

Description and identification of the machinery:

Heat pump

BP-35WS-B, BP-50WS-B, BP-50HS-A, BP-85HS-A, BP-100HS-A BP-160HS-A

The machinery is fulfils all the relevant provisions of these Directives:

– 2004/108/EC Electromagnetic compatibility (EMC)

– 2006/95/EC Low Voltage (LVD)

– 2002/96/EC Waste electrical and electronic equipment (WEEE)

– 2002/95/EC Use of certain hazardous substances in electrical and electronic equipment (RoHs)

Reference to the harmonised standards used:

EN 60335-1:2002+A11:2004+A1:2004+ A2:2006+A12:2006

EN 60335-2-40+A11:2004+A12:2005+A1:2006

EN 55014-1-2006

EN 55014-2:1997+A1:2001

EN 61000-3-2:2006

EN 61000-3-3:1995+A1:2001+A2:2005

Place and date of the declaration:

26/03/2009

The identity and signature of the person empowered to draw up the declaration on behalf of the

manufacturer or his authorised representative:

Astolfi Radames

speedheat

Waterpower 5000

speedheat

Art.Nr.: 00-49200 / BP-50HS-A

speedheat

Waterpower 8500

speedheat

Art.Nr.: 00-49205 / BP-85HS-A

1.1. Service Processing

For technical information, missing parts or in the case of a complaint, please contact our customer service:

Important note: On the pump label of your heat pump is a production number shown, please provide

this number in the case of a complaint.

Steinbach VertriebsgmbH, Aistingerstrasse 2, 4311 Schwertberg, AUSTRIA

Tel. Austria: (0820) 200 100 111 (0,145€ per minute from all networks)

Tel. Germany: (0180) 5 405 100 111 (0,14€ per minute from landline, mobile radio max. 0,42€ per minute)

e-mail: [email protected], www.steinbach.at

Speedheat Waterpower page 6 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 6-di/of 32

1.2. Warranty.

1.2.1. General conditions.

i. In accordance with these provisions, the dealer guarantees that the Product under

this warranty (“the Product”) does not have any conformity defect upon delivery.

ii. The Product Warranty Period is two (2) years, effective upon delivery to the

purchaser.

iii. In the event of Product conformity defects and the purchaser informs the dealer

during the Warranty period, the dealer must repair or replace the Product at

his/her own expense and at the site deemed most suitable, unless this is

impossible or out of proportion.

iv. Should the Product be irreparable or irreplaceable, the purchase may request a

proportionate price reduction or, if the conformity defect is sufficiently important,

the termination of the sales contract.

v. Parts replaced or repaired under this warranty do not extend the length of the

original Product warranty but are covered by their own warranty.

vi. To validate this warranty, the purchaser must provide proof of Product purchase

and purchase date.

vii. Should the purchaser find conformity defects six months after delivery, the

purchaser must prove the origin and existence of the defect found.

viii. The Warranty Certificate does not restrict or compromise consumer rights

provided by mandatory national regulations.

1.2.2. Special conditions.

i. This warranty covers the products referred to in this manual.

ii. This Warranty Certificate in only applicable in EU member countries.

iii. To validate this warranty, the purchaser must strictly follow the instructions

provided by the Manufacturer in the documents that accompany the Product when

applicable according to Product range and model.

iv. Should a schedule be specified for the replacement, maintenance or cleaning of

some Product parts or components, the warranty is only considered valid if this

schedule is correctly observed.

1.2.3. Restrictions.

i. This warranty is only applicable to consumer sales where a "consumer" is the

person who purchases the Product for purposes not pertinent to his/her

profession.

ii. The warranty does not cover normal wear due to Product use. As for parts,

components and/or replaceable or consumable materials such as batteries, light

bulbs, etc., that instructed in the documentation that accompanies the Product

shall be observed.

iii. The warranty does not cover the cases in which the Product:

a. was subject to incorrect treatment;

b. was subject to repairs, maintenance or tampering by unauthorised personnel;

c. was repaired and equipped with unoriginal parts.

Should the Product conformity defect be consequent to incorrect installation or

commissioning procedure, this warranty shall only be applicable when this

installation or commissioning procedure is included in the Product sales contract

and performed by the dealer or under his/her authority.

Speedheat Waterpower page 7 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 7-di/of 32

1.3. Symbol key.

Indicates hazardous situations and warnings. The manual parts marked by this symbol

must be read with the utmost care.

Indicates that work must not be performed on live electrical equipment. This work can

begin after taking safety measures.1

1.4. Safety regulations for heated pools2.

During normal swimming activities, 26÷30 [°C] water temperature is recommended. 38 [°C]

water temperature is only considered safe for adults in good health conditions. The utmost

caution is recommended for use by children.

Pool temperature must never exceed 40 [°C].

Do not drink alcoholic beverages before, after and while swimming. Alcohol consumption

may cause drowsiness, loss of consciousness and consequent drowning.

Swimming in pools with temperatures over 38 [°C] is not recommended for pregnant

women. Excessively hot water could damage the foetus, especially during the first

trimester, causing deformities or brain damage.

Before entering the pool, always check water temperature with a precision thermometer.

Temperature regulated by the heat pump guarantees approximately ±3 [°C] precision.

People who suffer from diabetes, heart disease, circulatory or blood pressure problems

should consult a physician before entering heated pools.

If taking drugs that induce drowsiness (i.e.: tranquillizers, antihistamines or

anticoagulants), avoid swimming in heated pools.

Prolonged immersion in hot water may cause hyperthermia3, while immersion in cold water

may cause hypothermia4, with symptoms such as: Dizziness, fainting, drowsiness,

lethargy5. Consequences of hyperthermia and hypothermia may be: unawareness of

imminent danger, lack of heat or cold perception, failure to recognise the need to exit the

pool, physical inability to exit the pool, damages to foetus for pregnant women,

unconsciousness with consequent drowning risks.

1.5. Energy savings.

The heat pump slowly heats pool water. For weekend use, keeping pool temperature at

the desired value even when not in use is recommended. If temperature is allowed to

drastically reduce, several days may be required to restore the desired temperature. In the

event of prolonged pool disuse (more than one week), turning off the heat pump or

reducing the set temperature by several degrees is recommended to save energy.

The difference between the ambient temperature and water temperature should never be

over 15 [°C]. For this reason, do not use the heat pump when the ambient temperature is

under 15 [°C]. Please see Paragraph 5.2.7.

For improved energy savings, using the automatic start and stop functions is

recommended. Please see Paragraph 5.2.8 and Paragraph 5.2.9.

Once the ideal water temperature is set, use the key lock function to prevent changes to

the set temperature and/or prevent other adjustments. Please see Paragraph 5.2.11.

Protect the pool from wind.

When the pool is not in use, cover it with a tarp to limit heat dispersion.

1.6. General information.

SERIES BP heat pumps are devices accessible to the public and were designed to heat

and cool water intended for home pools.

1 This symbol may be found on the labels on SERIES BP heat pumps:

2 Guidelines for safe recreational water environments - VOLUME 2 - SWIMMING POOLS AND SIMILAR

ENVIRONMENTS - WORLD HEALTH ORGANIZATION 2006.

3 Increase in body temperature over physiological limits, maximum limit 37 [°C].

4 Decrease in body temperature over physiological limits, minimum limit 35 [°C].

5 State of inactivity or lack of reactivity that nears unconsciousness.

Speedheat Waterpower page 8 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 8-di/of 32

SERIES BP heat pumps must not be used with other heating systems such as electric

heaters.

This manual provides instructions for the installation and use of SERIES BP heat pumps.

Carefully read this manual before installation. Failure to observe the manual instructions

may cause personal or property damages or damage the heat pump.

Failure to observe the instructions in this manual immediately null and voids the warranty.

Steinbach VertriebsgmbH is not liable for any damages due to improper heat pump use.

The manual must be kept integral and in good conditions. It must accompany the heat

pump until it is decommissioned.

In the event of malfunctions, consult the instruction manual and, if necessary, contact

specialised technicians.

Installation and maintenance must be performed by qualified technicians unless otherwise

indicated in the manual.

Initial system commissioning must only be performed by specialised technicians.

Working on the heat pump when connected to the electrical mains is strictly prohibited.

Only begin work after taking the safety measures.

The heat pump is not suited for people (even children) who suffer from physical, sensorial

or mental handicaps or people who do not have sufficient experience or training unless

instructed on heat pump use and assisted by a person in charge of their safety. Supervise

children to ensure they do not play with the device.

Steinbach VertriebsgmbH continually strives to improve all types and models. We trust the

user will understand the technical modifications Steinbach VertriebsgmbH reserves the

right to make on the shape and fittings on SERIES BP heat pumps.

1.7. Definitions6.

Power cord: flexible cord, for power supply, attached to the device.

Tool: Screwdriver, coin or any other object that can be used to move a screw or similar

fastening device.

Protection device: Device whose operations prevent hazardous situations in abnormal

operating conditions.

Contact switch disconnection: Disconnection of both power conductors with a single

contact opening action.

Heat pump: device that absorbs heat at a given temperature and releases it at a higher

temperature.

Heat exchanger: device specifically designed to transfer heat between two physically

separate fluids.

Compressor: device specifically designed to increase fluid pressure.

Evaporator: heat exchanger where coolant is vaporised by heat absorption.

Pressure limiter device: mechanism that automatically responds to a set pressure,

interrupting the operations of the element that controls pressure.

Device accessible to the public: device intended to be installed in homes or commercial

buildings.

Installation manual: document intended for specialised technicians that illustrates how to

commission and maintain the heat pump.

User manual: document intended for the end user that illustrates how to use the heat

pump.

Necessary clearance: minimum heat pump installation area.

2. Product presentation.

2.1. Product scope.

SERIES BP heat pumps were designed to heat and cool water intended for home pools.

6 Definitions in accordance with regulation CEI EN 60335.

Speedheat Waterpower page 9 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 9-di/of 32

2.2. Composition.

1 Fan protection net

2 Body

3 Display

4 Refrigerant charge valve (inside for BP-35WS-B)

5 Pressure manometer

6 Water outlet

7 Power cord

8 Water inlet

9 Heat exchanger

10 Fan

11 Compressor

12 Pressure sensor

13 Heat exchanger

14 Water sensor

15 Four way valve7

16 Ambient sensor8

17 Plate heat exchanger temperature sensor9

Figure 1: Main heat pump parts. 18 Flow sensor

7 Not included in model BP-xxWS-B (xx=35, 50).

8 Not included in model BP-xxWS-B (xx=35, 50).

9 Not included in model BP-xxWS-B (xx=35, 50).

Speedheat Waterpower page 10 of 44

IRUWRGD\µVOLIHVW\OH



Nome file:

7500018 - ISTR.UTENTE HEAT PUMP VERS. EN.doc Rev. 6 del/of 12/04/2010

Page 10-di/of 32

3. Technical specifications.

Model

Unit of

measure BP-35WS-B BP-50WS-B BP-50HS-A BP-85HS-A BP-100HS-A BP-160HS-A

Thermal power (heating)9[kW] 3.5 5.0 5.0 8.5 10.5 17.0

Refrigerant power (cooling) [kW ] -10 4.3 6.8 8.5

Absorbed power11 [kW ] 0.7 5 1.0 1.0 1.7 2.1 3.5

Absorbed current12 [A] 3.8 5.5 5.5 7.9 9.8 16

Power voltage13

[V]

[Hz]

220-240

COP

(Coefficient Of Performance) [ ] 5.0 5.0 4.2 5.0 5.0 5.0

ERR (Energy Efficient Ratio) [ ] -14 3.6 4.0 4.0 4.0

Refrigerant - R410A

Refrigerant gas quantity [kg] 0.75 0.85 1.30 1.60 2.85

Prot ection grade at water input - IPX4

Number of compressors - 1

Compressor type - Rotary

Heat exchanger - Titanium

Minimum water flow [m3/h] 2.5 3 3.5 4.0 6.5

Hydraulic connections [mm] 50

Number of fans - 1

Absorbed power by fan [W] 70 85 100 220

Fan RPM [RPM] 830 900 850 800

Fan air flow direction Horizontal

Fan air flow [m3/h] 1200 1600 2000 3400

Noise [dB(A)] 50 51 53 54 60

Dimensions (L/D/H) [mm] 760x270x470 955x305x565 1005x305x610 1120x430x790

Net/gross weight [kg] 34/38 51/54 54/57 63/67 114/124

The difference between the ambient temperature and water temperature should

never be over 15 [°C]. For this reason, do not use the heat pump when the ambient

temperature is under 15 [°C].

10 Variable according to ambient conditions.

11 Operating mode not included.

12 Variable according to ambient conditions.

13 Variable according to ambient conditions.

14 Single phase alternating current.

15 Operating mode not included.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Steinbach Schwimmbadheizung Handbücher

Steinbach

Steinbach 049100 Bedienungsanleitung

Beliebte Schwimmbadheizung Handbücher anderer Marken

Nibe

Nibe S Series Benutzerhandbuch

Zodiac

Zodiac JXi 200 Bedienungsanleitung

Texsun

Texsun El Niño Bedienungsanleitung

Aqua Comfort

Aqua Comfort AC110 Bedienungsanleitung

HeatPRO

HeatPRO pool heat pump Bedienungsanleitung

Dickinson

Dickinson NEWPORT Bedienungsanleitung

Pentair Pool Products

Pentair Pool Products MiniMax CH 150 Bedienungsanleitung

Jandy

Jandy LJ Bedienungsanleitung

Pentair Pool Products

Pentair Pool Products MiniMax NT Series Bedienungsanleitung

Raypak

Raypak P-R185A to P-R405A, C-R185A to Bedienungsanleitung

Hayward Pool Products

Hayward Pool Products HP40A Service-Handbuch

Laars

Laars Lite 2 LC Bedienungsanleitung

SUPREME

SUPREME Heatseeker Solar Pool Heating Bedienungsanleitung

UTC

UTC ICP HMP-03 Montageanleitung

Pentair

Pentair ETi 400 Bedienungsanleitung

Hayward

Hayward ENP2M-9A Service-Handbuch

BriskHeat

BriskHeat TOT Series Bedienungsanleitung

Hayward

Hayward C-SPA-XI 5.5 Bedienungsanleitung