STEINWAY LYNGDORF Steinway & Sons Head Unit Processor Bedienungsanleitung

[Skriv tekst]

HEAD UNIT

SURROUND SOUND PROCESSOR

INSTALLATION MANUAL

October 2018

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Table of Contents

Compliance .......................................................................................................... 5

Pre-Installation ..................................................................................................... 6

Unpacking the unit ............................................................................................ 6

Operating Voltage ............................................................................................ 7

Ventilation Requirements ................................................................................. 7

Heat output ....................................................................................................... 7

Home Automation System Integration ................................................................. 8

Rear Panel ........................................................................................................... 9

Remote .............................................................................................................. 10

Setup Procedure ................................................................................................ 11

Installation Via OSD ........................................................................................... 12

Installation Via Web Interface ............................................................................ 12

Source ................................................................................................................ 12

Create ............................................................................................................. 12

Edit / Edit all enabled sources. ....................................................................... 13

Arrange / Arrange the order of sources by making a prioritized list. .............. 13

Delete / Delete enabled sources. ................................................................... 13

Speaker and Room ............................................................................................ 13

Speaker Configuration .................................................................................... 13

RoomPerfect™ ............................................................................................... 14

How to Set Up RoomPerfect™ .......................................................................... 15

Volume Setting ............................................................................................... 15

RoomPerfect™ Preparations ......................................................................... 15

Placing the Microphone in the Focus Position ............................................... 15

Measuring the Focus Position ........................................................................ 16

Measuring Random Room Positions .............................................................. 16

Room Measurements Above 90% RoomKnowledge ..................................... 17

Audio Setup ....................................................................................................... 18

Audio Processing ........................................................................................... 18

Voicing Setup ................................................................................................. 18

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Zone B ............................................................................................................... 19

Setup .............................................................................................................. 19

System Configuration ......................................................................................... 19

General Setup ................................................................................................ 19

Power management ....................................................................................... 19

Default volume settings .................................................................................. 19

HDMI CEC settings ........................................................................................ 20

Display timeout ............................................................................................... 20

Password protection ....................................................................................... 20

Control of speaker setups .............................................................................. 20

Show bypass .................................................................................................. 20

Enable front IR sensor .................................................................................... 20

OSD info level ................................................................................................ 20

Trigger In Setup .............................................................................................. 20

Trigger Out Setup ........................................................................................... 20

Network Configuration .................................................................................... 20

Streaming Setup ............................................................................................. 20

Manage Software ............................................................................................... 21

Software Information ...................................................................................... 21

Network Information ....................................................................................... 21

Backup ........................................................................................................... 21

Restore ........................................................................................................... 21

Factory Reset ................................................................................................. 21

Software Update ............................................................................................. 21

Daily Operation .................................................................................................. 22

Audio Change Audio Modes ..................................................................... 22

Mute Turns the sound on and off. ........................................................... 22

Stand-By Turn the system from op. mode to standby and vice versa ..... 22

Voicing Skip between the active Voicings ................................................ 23

Maintenance ...................................................................................................... 24

Troubleshooting ................................................................................................. 24

RoomPerfect™ ............................................................................................... 24

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Network Setup ................................................................................................... 26

Connecting to Head Unit Processor with a Network Cable ............................ 26

Set Up a Fixed IP Address in Windows XP or Windows 7 ............................. 27

Trademarks ........................................................................................................ 28

Service Information ............................................................................................ 28

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Compliance

WEEE

The European Parliament and the Council of the European Union have issued the Waste Electrical and

Electronic Equipment Directive. The purpose of the Directive is to prevent waste of electrical and electronic

equipment and to promote reuse, recycling, and other forms of waste recovery. Steinway Lyngdorf products

and the accessories packed with them are subject to the WEEE Directive. Please dispose of any waste

materials in accordance with your local recycling regulations. Products and equipment which must be

collected for reuse, recycling, and other forms of recovery are marked with the icon of the crossed-out waste

receptacle.

FCC

Steinway Lyngdorf products and accessories comply with parts 15 and 68 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must

accept any interference received, including any interference that may cause undesired operation. The Head

Unit Processor contain TX FCC ID: TYOJN5139M0.

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment. Equipment marketed to a consumer must be capable of complying

with the necessary regulations in the configuration in which the equipment is marketed.

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Pre-Installation

Please read all material carefully prior to installation. If you need additional assistance, contact your Steinway

Lyngdorf representative.

Unpacking the unit

Unpacking the Head Unit Processor

The Head Unit Processor is packed in a wooden crate. A tool for removing the clips is in the pallet. Remove the clips from

the top of the crate and remove the lid. Afterwards, remove the clips on the walls. You can now easily get access to the

head unit and move it from the pallet.

Carefully check for shipping damage. If the unit bears any sign of transport damage you need to photograph the damage,

and report the incident to your Steinway Lyngdorf representative immediately

Note: Keep the shipping carton and all packing material for future use. If this unit is shipped

without the original packing, damage could occur and void the warranty.

Inventory

Check the list below to ensure that all necessary product components have been delivered. Report all

discrepancies to your Steinway Lyngdorf representative immediately.

• Owner’s manual

• Power cord

• Link cable

• IR / RF Remote

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Operating Voltage

Steinway Lyngdorf products must be connected to the mains power system. The Head Unit Processor will

automatically detect the voltage between 110-230v.

Ventilation Requirements

The Head Unit Processor does not have a built-in fan, nor does it require special measures to ensure proper

heat dissipation. However, it should be placed in an environment free of excessive heat.

Heat output

Maximum: 85W / 290 BTU/hr.

Cables and Plugs

Use only mains cables and power plugs approved by Steinway Lyngdorf. Using other types may cause damage

to the system and will void the warranty.

Connecting

For cabling between the processor and amplifiers, please use RJ45 to RJ45 B standard cables. Use only cables

and connectors approved by Steinway Lyngdorf. Poor quality cables may violate safety/ EMC regulations as

well as cause noise and interference.

• For cable lengths less than 1 meter, use CAT5E/shielded CAT6 cable.

• For cable lengths in excess of 1 meter, use double-shielded CAT5E cables.

• All RJ45 connectors should be shielded.

Please refer to the wiring diagram supplied by Steinway Lyngdorf to determine which cables you need.

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Home Automation System Integration

The Head Unit Processor is compatible with home automation systems via the RS232 and network connector

on the rear socket panel. The Head Unit Processor’s IR and trigger connections can also be programmed for

use in a home automation system.

IP Control

Open a TCP connection on port 84 and use the same protocol as on the serial interface (see Head Unit

Processor Serial Control Manual). Use Telnet, Putty, or similar programs to open the TCP connection.

If you do not know the IP address of the Head Unit Processor on your local network, the Head Unit Processor

supports Apple´s Bonjour Discovery service, which must be on the computer you want to set up the Head Unit

Processor with. The software is built-in as part of the Apple OS X operating system (not iOS devices). For

Windows operating systems, the software can be found at http://www.apple.com/support/bonjour/

Pressing the OK button on the remote and toggling through Info will also display the current IP address of the

unit.

Access the Head Unit Processor by going to http://headunit.local in your browser.

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Rear Panel

On the back of the Head Unit Processor, you will find a range of inputs and outputs:

• Various optical, coaxial, and analog stereo audio inputs.

• 3 HDMI inputs and 1 HDMI outputs, all 4K compatible.

• 1 trigger input and 4 trigger outputs.

• 2 IR inputs (IR in A and B) and 1 IR connector output (IR in B - duplicated).

• 2 LAN connectors, for Ethernet connection on the local network. IP control is supported.

• 2 USB connectors, for music file playback, software updating, etc.

• 1 streaming USB input.

• 1 SD card slot for storing backup data.

• 1 microphone input for the RoomPerfect™ room correction microphone.

• 1 RS-232 connector for serial control of the unit.

• 5 Digital Link outputs for connecting Steinway Lyngdorf’s amplifiers.

Note: Do not use the USB ports for charging smartphones and tablets.

In Standby mode, only LAN A is active; LAN B connector is not active.

Steinway & Sons Head Unit Processor – Installation Manual, version 1.0

Remote

The Head Unit Processor comes with a dedicated RF and IR remote control for installations and everyday use.

Setup Access the installation menu.

Standby Turn the Head Unit Processor on and into standby.

Audio Access the post-processing menu.

Up/Down Move up and down in menus.

Browse available settings in a menu.

Toggles between the available RoomPerfect™ filters.

Left/Right Move left and right in menus.

Toggle between neutral and the available voicings.

OK Activate the info screen, indicating the status of the unit.

Select a menu and store a selected setting.

Back Return to the previous menu.

Menu Access the user menu.

SRC Access the source menu list.

Source -/+ Toggle between active sources.

Volume +/- Turn volume up and down.

Mute Mute and restore the sound.

Play/Pause Play/pause the currently playing track of the media player.

Skip Forward/

Backwards Skip in the current playlist in the media player.

Inhaltsverzeichnis

Andere STEINWAY LYNGDORF Lautsprechersystem Handbücher

STEINWAY LYNGDORF

STEINWAY LYNGDORF M Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung