Steren K-400 Bedienungsanleitung

ENGLISH

ENGLISH-02

Before using your new Parallel Port Interface K-400, please make

sure to read this instruction manual in order to avoid any

malfunctions or misuse. Please keep this manual for future

reference.

IMPORTANT

Do not expose this device to direct sunlight or to extreme

temperatures

Do not use or store the parallel port interface anywhere it might get

wet as this could cause a malfunction.

This device contains small parts. Do not leave it within the reach of

children.

Adult supervision is recommended when the device is being

assembled because it requires soldering.

Always use a soft dry cloth in order to clean.

You must have circuit soldering skills to avoid damages in the

printed circuit.

Use a 30W soldering pen.

•

This kit is ideal for electronic students or hobbyists because

ENGLISH

ENGLISH-03

FEATURES

This Parallel port interface K-400 is ideal for electronic students or

hobbyists because it allows them to develop creativity in the

programming of several different prototypes of a mechanical system.

This parallel port interface includes all the components necessary for

building this prototype.

Your new Parallel Port Interface allows you to program various different

projects.

In the “Manual ABC de la Mecatrónica” you will nd ve different

examples of projects with all the required information.

REQUIRED EQUIPMENT

Soldering Iron.

Soldering Solution.

Regulated 5 volts power source.

•

ENGLISH

ENGLISH-04

CONTAINED WITHIN

1 Printed Circuit PCB 1 DB-25 connector for soldering (500-025)

2 DB-9 Connectors for soldering (500-009) 1 Integrated Circuit

SN74LS373N

1 Integrated Circuit TTL SN74LS245N

ENGLISH

ENGLISH-05

In order to install the integrated circuits, observe the safety

precautions and pay special attention to the numbering of the pins

locating the #1 pin.

PIN 1

OPTIONAL

For this purpose use a 5V/1A positive voltage regulator

ENGLISH

ENGLISH-06

ASSEMBLY

Soldering skills are necessary in order to avoid damage to the

printed circuit

Use a 30-watt soldering iron. A higher energy soldering iron is

NOT recommended.

Before beginning the assembly of this parallel port interface K-400, it is

necessary to have a pencil type soldering iron and soldering solution.

Adult Supervision is recommended during assembly.

1. Place the integrated circuit SN74LS373N in its respective position

(U1). Check the pin position and solder the terminals on their underside

and cut off the excess metal.

2. Place the integrated circuit SN74LS245N in its respective position

(U2). Check the pin position and solder the terminals on their underside

and cut off the excess metal.

3. Place the DB9 connectors in their respective positions (J1-J2).

Solder the terminals on their underside and cut off the excess metal.

4. This connector does not go on the same side as the components.

Place the DB25 connector on the underside of the card (J3). Solder the

terminals on the upper side.

5. Solder the power cables in their respective positions (BT1). The

power input voltage is 5 volts.

OPTIONAL

place the voltage regulator MC7805CT in their respective position

(U3). check the position of the pin 1 weld terminals at the bottom.

OPERATION OF THE PARALLEL PORT INTERFACE K-400

1. Never connect the parallel port interface K-400 to the computer if

the parallel port interface K-400 is connected to the power source.

2. Make sure the parallel port interface K-400 is powered off.

3. Once the parallel port interface K-400 is connected, make sure its

supported by a non-conducive surface and that this surface is free of

any elements that may cause a short circuit in the PCB circuit.

4. Make sure that the power cables are well connected and that the

power source is correct at 5 regulated volts.

SPECIFICATIONS

Polarization Voltage: 5 V - - -

Power Consumption: 60mA

Products design and specications are subject to change without

previous notice.

ENGLISH

ENGLISH-07

DIAGRAM

ENGLISH

ENGLISH-08

WARRANTY

This Steren product is warranted under normal usage against defects in workmanship and

materials to the original purchaser for one year from the date of purchase.

CONDITIONS

1.- This warranty card with all the required information, invoice or purchase ticket, product

box or package, and product, must be presented when warranty service is required.

2.- If the product stills on the warranty time, the company will repair it free of charge.

3.- The repairing time will not exceed 30 natural days, from the day the claim was received.

4.- Steren sell parts, components, consumables and accessories to customer, as well as

warranty service, at any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,

failure to follow enclosed instructions, improper repair by unauthorized personnel, improper

safe keeping, among others.

a) The consumer can also claim the warranty service in the purchase establishment.

b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

Product: Parallel Port Interface

Part number: K-400

Brand: Steren

RETAILER INFORMATION

Name of the retailer

Address

Product

Brand

Part number

Serial number

Date of delivery

In case your product fails or have questions, please contact your nearest dealer. If

you are in Mexico, please give a call to our Call Center.

Call Center

01 800 500 9000

Inhaltsverzeichnis

Sprachen:

Andere Steren Aufnahmegeräte Handbücher

Steren

Steren HER-253 Bedienungsanleitung

Steren

Steren EL-167 Bedienungsanleitung

Steren

Steren 200-387 Bedienungsanleitung

Steren

Steren 200-384 Bedienungsanleitung

Steren

Steren 252-905 Bedienungsanleitung

Steren

Steren MIX-160 Bedienungsanleitung

Steren

Steren MS-505 Bedienungsanleitung

Steren

Steren SEL-400 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch