Steren SWI-510 Bedienungsanleitung
IMPORTANT
Before using the new Light & Motion switch, please read next
recommendations
Do not expose to extreme temperatures.
Clean only with a soft, dry cloth.
FEATURES
The light and motion sensor switch can be installed in a standard
electrical outlet box.
Automatic or standardmode switch.In automatic mode the motion and
light sensor will turn on by hight, only.
800W maximum load.
Time delay, you can turn a device on for periods of time between 8
seconds and 7 minutes.
Detection angle: 180° (horizontal)
Motion speed: from 0.6 to 1.5 m/s
Maximum detection distance range: 9 metres (<24°C)
Minimum environment light: 20 lux
•
•
•
•
•
•
•
•
•
•
ENGLISH
ENGLISH-02
CONTROLS
1.- LED indicator
Turns on when the sensor detects
movement.
2.- Light & Motion Sensor
3.- Time delay
Allows increase or decrease the time
that will last lit the device (lamp,focus, alarm, etc.)
on absence of movement or light.
4.- 3 position switch
On.- Turn the device on (lamp, focus, alarm, etc.)
manually
Off .- Turn the device off (lamp, focus, alarm, etc.) manually
Auto: Automatic activation (turn on or off automatically)
ENGLISH-03
ENGLISH
1
2
3
4
INSTALLATION
1.- Review and identify the wires from the box of electrical contact where the
sensor will be installed.
ENGLISH-04
ENGLISH
LINE
NEUTRAL
ENGLISH-05
ENGLISH
2.- Make the connections between the sensor and the electrical installation, see
the following diagrams connection for more information.
BLACK
SENSOR
OUT
RED
GREEN
IN
LOAD
ENGLISH-06
ENGLISH
GREEN
BLACK
RED
NEUTRAL
LINE
ENGLISH-07
ENGLISH
3.- To use the sensor automatically,set the time that the device will turns on
(lamp, focus, alarma, etc.) in the absence of movement, move the
selector to the right to increase or left to diminish the time.
The minimum time is 8 seconds + / - 3 seconds
The maximum time is 7min + / - 2 mins
Antes de utilizar su nuevo Kit Convertidor Analógico/Digita Ant
ENGLISH-08
ENGLISH
4.- Screw the sensor in the box, insert the selector time cover and nally
place the front cover of the sensor.
.
SPECIFICATIONS
OPERATION
Manual mode
1.- Simply move the switch to ON position to power on the device, place to
OFF position to power it off.
Automatic mode
1.- Once you set the selector time, move the switch to “Auto”,
whenever the sensor detects motion the lamp will turn on and
automatically power off after the sensor do not detect any movement.
SPECIFICATIONS
Input: 110-130V~ 60Hz 450mA
Charge: 800Wmax
Operating temperature: -20°C to 40°C
Operating humidity: < 93%
Product desing and specications are subject to change without
previous notice
ENGLISH-09
ENGLISH
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to
the original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or
package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as
warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to
follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among
others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer Part number Brand
Address Serial number
Product Date of delivery
In case your product fails or have questions, please contact your nearest dealer. If you are in
Mexico, please give a call to our Call Center. 01 800 500 9000
Product: Light & Motion sensor switch
Part number: SWI-510
Brand: Steren
Inhaltsverzeichnis
Sprachen:
Andere Steren Schalten Handbücher
Steren
Steren ELE-105 Bedienungsanleitung
Steren
Steren COM-445 Bedienungsanleitung
Steren
Steren USB-524 Bedienungsanleitung
Steren
Steren 200-385 Bedienungsanleitung
Steren
Steren ALA-003 Bedienungsanleitung
Steren
Steren COM-320 Bedienungsanleitung
Steren
Steren USB-528 Bedienungsanleitung
Steren
Steren ELE-106 Bedienungsanleitung
Steren
Steren USB-520 Bedienungsanleitung
Steren
Steren FASTHOME 550-030 Bedienungsanleitung
Steren
Steren COM-315 Bedienungsanleitung
Steren
Steren EL-101 Bedienungsanleitung
Steren
Steren 201-737 Bedienungsanleitung
Steren
Steren COM-315 Bedienungsanleitung
Steren
Steren SWI-008 Bedienungsanleitung
Steren
Steren SWI-600 Bedienungsanleitung
Steren
Steren 200-386 Bedienungsanleitung
Steren
Steren COM-365 Bedienungsanleitung
Steren
Steren SWI-005 Bedienungsanleitung
Steren
Steren USB-537 Bedienungsanleitung
