STI STI-SA5000 Series Bedienungsanleitung

STI-SA5000 SERIES

SELECT-ALERT

ALARM MINI CONTROLLER

INSTRUCTION MANUAL

“We Protect The Things That Protect You.”

Safety Technology International, Inc.

Features:

• This controller can be used as a cabinet

alarm, door alarm, link with push but-

ton/switch or as a burglar alarm.

• Available with amber, green, blue, red

or white lens.

• Durable, polycarbonate construction.

• Includes ten high intensity ED’s.

• Siren offers 32 user selectable tones.

• May be set for a piercing 100 or 85 dB

alarm.

• For indoor use only.

• Independent strobe and siren timing

of 15 seconds, 30 seconds, 60 seconds

or continuous.

• Includes a tamper switch which trig-

gers the alarm when unit is being re-

moved from a wall.

• ow battery indicator.

• Powered by a 9 VDC battery (not in-

cluded) or external 12 – 30 volts.

• One Form “C” dry relay contact output.

Warnings and Cautions ......................................................................page 3

Warranty Information ........................................................................ page 3

Dimensions ........................................................................................page 3

Specifications ...................................................................................... page 4

Electronic Setup .................................................................................. page 4

Alarm Tones ........................................................................................page 5

Alarm Timing and Volume .................................................................. page 5

Terminal Strip Connections ................................................................ page 5

Mounting Options .............................................................................. page 6

Electronics .......................................................................................... page 7

CONTENTS

SELECT-ALERT ASSEMBLY ARTS LIST

ACCESSORIES

1 - 05000 Electronics Assembly

1 - 05050 Color Lens

4 - 19068 Screw #6 x 5/8 in.

4 - 19002 Screw #8-32 x 3/8 in.

2 - 19039 Screw #6 x 1 1/4 in.

2 - 19018 Anchor #8-10

2 - 19062 Screw #6-32 x 1 1/2 in.

1 - 19011 #8-32 x 1/2 in. tamper screw

1 - 19016 Tamper wrench

SUB-71100A-W Backbox kit

18151 N.C. reed switch and magnet

SUB-SA505 Key switch mounting bracket (includes key switch & 2 keys)

BAT-9VDC 9 volt battery

18075 Additional replacement key

WARNINGS

All units are recommended for indoor use. Unit must be tested periodically to

verify the life of battery. STI recommends you change the 9 Volt battery twice

a year. When purchasing a Select-Alert, you will need to periodically test the

connections to make sure audibles function at a sound level to alert staff. In-

staller may need to purchase a simple audio-meter, typically available at your

local electronics store, to measure the sound in areas where the alarm is ex-

pected to be heard during normal noise environment. Results from this test

may prove it beneficial to purchase additional Select-Alert units.

All specifications and information shown are current as of publication and sub-

ject to change without notice.

WARRANTY INFORMATION

Three year guarantee against breakage of polycarbonate housing in normal

use (one year on electro mechanical and electronic components).

DIMENSIONS

FRONT SIDE

3.25 in.

(83mm)

4.83 in.

(123mm)

1.58 in.

(40mm)

2.73 in.

(69mm)

STE 1 - ELECTRONIC SETU

ALARM TONE

ALARM TIMING

STROBE TIMING

VOLUME

LED QTY 10

LOW BATTERY

INDICATOR LED

TERMINAL STRIP

TAMPER SWITCH

(REAR VIEW)

WIRE ENTRY

BATTERY

BATTERY CABLE

SIREN

S ECIFICATIONS

O ERATING VOLTAGE Internal power 9 VDC battery (not included)

Remote power 12-30 VDC

O ERATING TEM ERATURE 32°F -120°

OWER CONSUM TION Stand by: 50µA

Siren low volume: 85mA

Siren high volume: 90mA

Strobe: 25mA

SIREN VOLUME ow: 85 dB

High: 100 dB

ALARM TIMING Independent control for siren and strobe:

15s, 30s, 60s, continuous

LOW BATTERY WARNING ED flash once every 30 seconds

FORM C DRY CONTACTS 0-30VAC/DC, 1 Amp

Contacts reset after longest alarm setting

KEY SWITCH Alarm on: normally closed

ALARM SWITCH Stand by: normally open contact required

OLYCARBONATE U 94V-2

FLAMMABILITY RATING

INSTALLATION

NOTE: Select-Alert must be on a flat surface and lens must be in-

stalled or the tamper switch will trigger the alarm.

1 0 0 0 0 0 BUZZ

2 1 0 0 0 0 SLOW ON/OFF

3 0 1 0 0 0 SLOW SIREN

4 1 1 0 0 0 3 BEE / AUSE/RE EAT

5 0 0 1 0 0 UFO FAST

6 1 0 1 0 0 FAST SIREN

7 0 1 1 0 0 #5 FAST

8 1 1 1 0 0 #2 MEDIUM

9 0 0 0 1 0 #5 MEDIUM

10 1 0 0 1 0 SWOO MEDIUM

11 0 1 0 1 0 #3 MEDIUM

12 1 1 0 1 0 BUZZ TONE

13 0 0 1 1 0 STEADY FAST

14 1 0 1 1 0 SWOO SLOW

15 0 1 1 1 0 CONTINUOUS

16 1 1 1 1 0 FAST RE EAT

17 0 0 0 01 STANDARD ALARM

18 1 0 0 0 1 #3 FAST

19 0 1 0 0 1 #5 SLOW

20 1 1 0 0 1 FAST BEE

21 0 0 1 0 1 SOUND A

22 1 0 1 0 1 SOUND B

23 0 1 1 0 1 SOUND C

24 1 1 1 0 1 SOUND D

25 0 0 0 1 1 SOUND D LOUD

26 1 0 0 1 1 SOUND E

27 0 1 0 1 1 SOUND F

28 1 1 0 1 1 SOUND G

29 0 0 1 1 1 SOUND H

30 1 0 1 1 1 #4 LOW

31 0 1 1 1 1 SOUND K

32 1 1 1 1 1 CONTINUOUS FAST

ALARM TIMING VOLUME

STROBE TIMING

OFF

2345

15 seconds 1 1 1 1 High

30 seconds 1 0 1 0 1

60 seconds 0 1 0 1 ow

Continuous 0 0 0 0 0

1 = ON 0 = OFF

STE 2 - ALARM TONES - S1

STE 3 - ALARM TIMING AND VOLUME - S2

STE 4 - TERMINAL STRI CONNECTIONS

REMOTE POWER IN

12-30 VDC, 125mA

+-OFF ON

**MAIN POWER

CONTROL

STAND

ALARM

SWITCH

FORM "C"

DRY CONTACTS

NORMALLY OPEN

COM

+ -

DC IN

KEY

SWITCH

ALARM

SWITCH

COM

NORMALLY CLOSED

ACTIVE

1 2 3 4 5 1 2 3 4 5

ALARM

TIMING 1 2 3 4 5

VOLUME

STROBESIREN

*Factory default settings

**Shipped with jumper

wire installed. Remove

to add key switch or

other main power

on/off switch.

NOTE: “DC IN” are the

only polarity sensi-

tive terminals .

When external

power is used, bat-

tery will act as a

backup. “Dry Con-

tacts: NC, COM,

NO” are used for

remote alarm

monitoring.

NOTE: Sound may be disabled by clipping wires to

the siren. THIS WI VOID A WARRANTIES.

Remove two screws on circuit board; leave

enough length of wire to possibly reattach in

the future. Then insulate wires to prevent

shorting to electronic components.

WIRES TO SIREN

DRILL (4) 3/16 in. DIA. HOLES IF USING #8-10 ANCHORS.

DRILL (4) 3/32 in. DIA. HOLES WHEN USING #6 SCREWS ONLY.

19018 ANCHOR

#8-10

(4) PROVIDED

SUB-71100A-W

19039 SCREW

#6 x 1 1/4 in.

(4) PROVIDED

19060 SCREW

#6-32 x 1 in.

(2) PROVIDED

BASE PLATE

A) TO STI BACKBOX SUB-71100A-W

B) TOKEY MOUNT LATE OR INTO WALL WITHOUT ELECTRICAL BOX

STE 5 - MOUNTING O TIONS

NOTE: For bare wall installation, wire access hole may need to be drilled.

DRILL

3-/16 DIA HOLES

19018 ANCHOR

#8-10

(2) PROVIDED

19039 SCREW

#6 x 1 1/4 in.

(2) PROVIDED

BASE PLATE

18074 SWITCH LOCK

SUB-SA505 KEY SWITCH

MOUNTING BRACKET

3 9/32 in.

18075 REPLACEMENT

#801 KEY

1. Using 5/32 drill, drill through the (4) existing holes in backbox (one in each corner).

2. Place backbox on wall and mark the mounting hole positions.

3. If using #8-10 anchors, drill 3/16 dia. holes 1 in. deep into wall and press anchor into hole.

If using #6 screws only, drill 3/32 dia. holes 1 ¼ in. deep.

4. Mount backbox to wall using #6 x 1 ¼ in. screws.

5. Mount base plate as shown using (2) #6-32 x 1 in. screws.

NOTE: If not using STI backbox, make sure surface will depress tamper switch.

ENCLOSURE

ROUTE THE TWO KEY

SWITCH WIRES THROUGH

THE HOLE AS SHOWN

WIRE ACCESS HOLE

ROUTE THE TWO REED

SWITCH WIRES FROM

CABINET THROUGH THE

HOLE AS SHOWN

SINGLE GANG

ELECTRICAL BOX

19062 SCREW

#6-32 x 1 1/2 in.

(2) PROVIDED

BASE PLATE

05050- LENS COLORS

A - AMBER

B - BLUE

G - GREEN

R - RED

W - WHITE

19002 SCREW

#8-32 x 3/8 in.

(4) PROVIDED

05000 ELECTRONICS

INSTALLED

BASE PLATE

WIRE ACCESS HOLE

19016 TAMPER-PROOF

TOOL (1) PROVIDED

19011 TAMPER-PROOF

SCREW

ROUTE WIRES

THRU HOLE

STE 6 - ELECTRONICS FINAL ASSEMBLY

C) TOSINGLE GANG ELECTRICAL BOX

Wiring: After mounting circuit board assembly, connect wires. Refer to terminal strip connections (step 4).

Lens installation: Slide lip of lens behind circuit board mounting plate. Rotate lens into position. Secure with

tamperproof screw and special wrench.

Printed in USA Inst. Sht. SA5000, FEB2012

Safety Technology International, Inc.

2306 Airport Road

Waterford, Michigan 48327-1209

Phone: 248-673-9898 • Toll Free: 800-888-4784 • Fax: 248-673-1246

Safety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch

Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999

Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)

E-mail: info@sti-europe.com • Web: www.sti-europe.com

STE 7 - O ERATION

• Turn key switch on to arm.

• Cycle key switch to reset alarm.

• Alarm will sound when cover is removed, unit is removed from the wall or

cabinet is opened (alarm switch is electronically closed).

• To service, turn key switch off.

Inhaltsverzeichnis

Andere STI Controller Handbücher

STI

STI QuadSafe RM-4 Bedienungsanleitung

STI

STI RTQ Series Bedienungsanleitung

STI

STI SA5000 Series Merkblatt

STI

STI MC6 Series Bedienungsanleitung

STI

STI STI-SA5000 Series Bedienungsanleitung

STI

STI SC/BQ Bedienungsanleitung

STI

STI MC4 Series Bedienungsanleitung

STI

STI Select-Alert STI-SA5000 Series Bedienungsanleitung

STI

STI SA5000 Series Bedienungsanleitung

STI

STI SC Bedienungs- und Wartungshandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch